zack231's 4x4 CCSB, Project "Learning Experience" - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 04-27-2014, 02:04 AM

Before paint
Name: image.jpg
Views: 707
Size: 71.0 KB

Hmmm, I'm not sure why uploading pics is turning them sideways....

joe231 · 04-27-2014, 02:06 AM

Name: image.jpg
Views: 720
Size: 45.3 KB

joe231 · 04-27-2014, 02:08 AM

Name: image.jpg
Views: 710
Size: 38.8 KB

mrolds88 · 04-27-2014, 08:50 PM

Interesting build, Joe. When you go to balance your driveshafts, try some hose clamps for temporary weight.

joe231 · 04-28-2014, 02:30 AM

Quote:

Originally Posted by mrolds88

Interesting build, Joe. When you go to balance your driveshafts, try some hose clamps for temporary weight.

Thanks!
Yeah that the plan, hose clamps to find balance and weld a washer on.

joe231 · 05-05-2014, 12:34 AM

Name: image.jpg
Views: 621
Size: 44.4 KB

joe231 · 05-05-2014, 12:36 AM

Name: image.jpg
Views: 622
Size: 33.2 KB

joe231 · 05-05-2014, 12:40 AM

Name: image.jpg
Views: 629
Size: 32.7 KB

joe231 · 05-05-2014, 12:41 AM

Name: image.jpg
Views: 629
Size: 23.4 KB

joe231 · 05-05-2014, 12:42 AM

Name: image.jpg
Views: 616
Size: 34.2 KB

joe231 · 05-05-2014, 12:47 AM

Name: image.jpg
Views: 623
Size: 23.7 KB

It's a bit of a pain welding this thin sheet metal to 1/4" plate.
I had to stack a bunch of tack welds.
Ran out of wire before I could finish the drivers side....

joe231 · 05-15-2014, 12:54 PM

Seats are in finally!
Name: image.jpg
Views: 585
Size: 27.6 KB

It was a lot if work, but after sitting in them it was worth it. Still need to hook up power to them.

I don't know why the pics are loading sideways....

So after we got the seats in, we fired her up and drove around the 'hood. It's alive once again!! Got some little stuff to do and hopefully Zack will be driving it this weekend. We are gonna head out to a local recreational area called Jim Creek (AKA: Knik River Public Use Area) for a shakedown run and possibly some camping. He is super stoked to finally see the reward of all his hard work.

oldgymnast · 05-15-2014, 01:30 PM

Looks good. What did the seats come out of?

joe231 · 05-15-2014, 02:31 PM

Thanks!
2007-ish Chevy.
The rear seat is from a Burb or Tahoe. Not sure if the front is from the same or a truck.

scotts62 · 05-19-2014, 06:51 AM

Cool!!!!!!! Hey i have a floor that needs finished up since you already have the tools out

joe231 · 05-19-2014, 11:11 AM

Heck yeah!
Come on over

mcbassin · 05-19-2014, 11:12 AM

Very nice progress Joe! digging the driveshaft setup....

joe231 · 05-19-2014, 07:46 PM

Thanks Mike!
I've noticed you have been making some progress yourself

mcbassin · 05-19-2014, 10:43 PM

Quote:

Originally Posted by joe231

Thanks Mike!
I've noticed you have been making some progress yourself

Thanks Joe, it's Been a long hard road building that old truck....I can't help but think about you guys every time I watch one of the many "reality" Alaska shows on TV these days.

joe231 · 05-20-2014, 02:57 AM

I hear that!! I'm digging the red for sure!

Don't get me started on those damn shows!
I hear there is a whole bunch of worse one coming out soon also

C@rnut001 · 07-28-2014, 12:49 AM

Joe, how is this truck doing for your son? It is great how you got it together.

joe231 · 07-28-2014, 03:33 AM

It's working great!
He still has small projects to tackle, but he drives it to work and around pretty much everyday.
He's working on getting some tunes in it now.

mcbassin · 07-28-2014, 08:41 AM

Quote:

Originally Posted by joe231

It's working great!
He still has small projects to tackle, but he drives it to work and around pretty much everyday.
He's working on getting some tunes in it now.

That's pretty cool. Good to hear you are raising them up right,,,,driving old Chevys

joe231 · 07-28-2014, 05:28 PM

You know it Mike!

Zack has paid for most of this project and has done the vast majority of the work. I helped him with some stuff or just gave him direction. Mostly I just annoyed him by telling him to think about the issues/problems and figure out a way/solution lol
He learned so much up til now and continues to learn. He is working now to figure out electricity and wiring.

04-27-2014, 02:04 AM	#76
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1984 K20 6.2L suburban, project "Burb sacrificed to build a 4x4 CCSB" Before paint Hmmm, I'm not sure why uploading pics is turning them sideways.... __________________ *CHEVY ONLY*

04-27-2014, 02:06 AM	#77
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1984 K20 6.2L suburban, project "Burb sacrificed to build a 4x4 CCSB" __________________ *CHEVY ONLY*

04-27-2014, 02:08 AM	#78
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1984 K20 6.2L suburban, project "Burb sacrificed to build a 4x4 CCSB" __________________ *CHEVY ONLY*

04-27-2014, 08:50 PM	#79
mrolds88 Registered User Join Date: Jul 2011 Location: WV Posts: 946	Re: 1984 K20 6.2L suburban, project "Burb sacrificed to build a 4x4 CCSB" Interesting build, Joe. When you go to balance your driveshafts, try some hose clamps for temporary weight. __________________ 72 GMC C2500 402/Th400 first truck (still have) 77 GMC C3500 CC dually Sold 70 C50 dump truck "Rusty" 87 K10 Suburban Sold 93 K2500 xcab 6.5TD 96 GMC K2500 Suburban 6.5 TD

05-05-2014, 12:34 AM	#81
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" __________________ *CHEVY ONLY*

05-05-2014, 12:36 AM	#82
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" __________________ *CHEVY ONLY*

05-05-2014, 12:40 AM	#83
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" __________________ *CHEVY ONLY*

05-05-2014, 12:41 AM	#84
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" __________________ *CHEVY ONLY*

05-05-2014, 12:42 AM	#85
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" __________________ *CHEVY ONLY*

05-05-2014, 12:47 AM	#86
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" It's a bit of a pain welding this thin sheet metal to 1/4" plate. I had to stack a bunch of tack welds. Ran out of wire before I could finish the drivers side.... __________________ *CHEVY ONLY*

05-15-2014, 12:54 PM	#87
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" Seats are in finally! It was a lot if work, but after sitting in them it was worth it. Still need to hook up power to them. I don't know why the pics are loading sideways.... So after we got the seats in, we fired her up and drove around the 'hood. It's alive once again!! Got some little stuff to do and hopefully Zack will be driving it this weekend. We are gonna head out to a local recreational area called Jim Creek (AKA: Knik River Public Use Area) for a shakedown run and possibly some camping. He is super stoked to finally see the reward of all his hard work. __________________ *CHEVY ONLY* Last edited by joe231; 05-15-2014 at 01:07 PM.

05-15-2014, 01:30 PM	#88
oldgymnast Registered User Join Date: Jan 2013 Location: Middletown, De Posts: 15	Re: zack231's 4x4 CCSB, Project "Learning Experience" Looks good. What did the seats come out of?

05-15-2014, 02:31 PM	#89
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" Thanks! 2007-ish Chevy. The rear seat is from a Burb or Tahoe. Not sure if the front is from the same or a truck. __________________ *CHEVY ONLY*

05-19-2014, 06:51 AM	#90
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: zack231's 4x4 CCSB, Project "Learning Experience" Cool!!!!!!! Hey i have a floor that needs finished up since you already have the tools out __________________ Scott 93 crew cab build Project 62

05-19-2014, 11:11 AM	#91
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" Heck yeah! Come on over __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

05-19-2014, 11:12 AM	#92
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: zack231's 4x4 CCSB, Project "Learning Experience" Very nice progress Joe! digging the driveshaft setup.... __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-19-2014, 07:46 PM	#93
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" Thanks Mike! I've noticed you have been making some progress yourself __________________ *CHEVY ONLY*

05-20-2014, 02:57 AM	#95
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" I hear that!! I'm digging the red for sure! Don't get me started on those damn shows! I hear there is a whole bunch of worse one coming out soon also __________________ *CHEVY ONLY*

07-28-2014, 12:49 AM	#96
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	Re: zack231's 4x4 CCSB, Project "Learning Experience" Joe, how is this truck doing for your son? It is great how you got it together. __________________ C@rnut001 (Owen) Alaskan Members Check In http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

07-28-2014, 03:33 AM	#97
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" It's working great! He still has small projects to tackle, but he drives it to work and around pretty much everyday. He's working on getting some tunes in it now. __________________ *CHEVY ONLY*

07-28-2014, 05:28 PM	#99
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: zack231's 4x4 CCSB, Project "Learning Experience" You know it Mike! Zack has paid for most of this project and has done the vast majority of the work. I helped him with some stuff or just gave him direction. Mostly I just annoyed him by telling him to think about the issues/problems and figure out a way/solution lol He learned so much up til now and continues to learn. He is working now to figure out electricity and wiring. __________________ *CHEVY ONLY*

Register or Log In To remove these advertisements.