|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-19-2021, 01:11 AM
|
#1 |
|
Registered User
Join Date: Jan 2005
Location: dartmouth,nova scotia,canada
Posts: 332
|
residual valve 2 front lines
i have frame mount booster with brass proportion valve. valve has 2 outlets for front disc brakes will i need 2 2lb residual valves?
 
|
|
|
|
02-19-2021, 01:21 AM
|
#2 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,510
|
Re: residual valve 2 front lines
Yup!
If you have two ports to separate lines. Your pic shows only one front port. |
|
|
|
|
02-19-2021, 06:47 AM
|
#3 | |
|
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: residual valve 2 front lines
You only need to use one of those front outlets. You can plug off the other and use a single line with a single residual valve followed by a T downstream to the L & R sides. Fewer junctions equal less chance of leaks.
Do you have front disc brakes? If the master cylinder is higher than the brake calipers (ie on the firewall) you don't need a front residual valve at all. Gravity does its job for you. Quote:
__________________
1951 Chevy Panel Truck Last edited by MiraclePieCo; 02-19-2021 at 07:49 AM. |
|
|
|
|
|
02-19-2021, 09:21 AM
|
#4 |
|
Registered User
Join Date: Jan 2005
Location: dartmouth,nova scotia,canada
Posts: 332
|
Re: residual valve 2 front lines
hi geezer other port on bottom. miricle pie i have camaro clip with front disc brakes frame mounted booster. so master is down low.
|
|
|
|
|
02-19-2021, 02:09 PM
|
#5 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,269
|
Re: residual valve 2 front lines
If you run two lines from the combination valve you will need two residual valves.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
02-19-2021, 02:11 PM
|
#6 |
|
Registered User
Join Date: Jan 2005
Location: dartmouth,nova scotia,canada
Posts: 332
|
Re: residual valve 2 front lines
thanks mr48chev just have one 2lb valve at the moment. got a 3/16 Tee and a plug just debating run 2 lines or 1?
|
|
|
|
|
02-20-2021, 11:15 AM
|
#7 |
|
Senior Member
  Join Date: Oct 2014
Location: Eagle, ID
Posts: 2,931
|
Re: residual valve 2 front lines
No need to run two. One line will suffice and you don't double your workload.
|
|
|
|
|
02-20-2021, 04:31 PM
|
#8 |
|
Registered User
Join Date: Jan 2005
Location: dartmouth,nova scotia,canada
Posts: 332
|
Re: residual valve 2 front lines
getting T ready now . bending lines from master to proportioning valve now a few bends so its taking some time.
|
|
|
|
|
02-20-2021, 07:09 PM
|
#9 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,510
|
Re: residual valve 2 front lines
Don’t forget the need for a 10# valve for the back if you’re got drum brakes.
|
|
|
|
|
02-20-2021, 10:07 PM
|
#10 |
|
Registered User
Join Date: Jan 2005
Location: dartmouth,nova scotia,canada
Posts: 332
|
Re: residual valve 2 front lines
Thanks geezer have most of brake line stuff installed. 10lb valve installed for back
 front valve Tee and lines  proportional valves and master lines  
Last edited by 56 3100; 02-20-2021 at 10:15 PM. |
|
|
|
|
02-22-2021, 06:03 PM
|
#11 |
|
Registered User
Join Date: Mar 2012
Location: Ardrossan Alberta
Posts: 67
|
Re: residual valve 2 front lines
Going through the same process now. I am using my line lock for the tee. not going to be a drag car, just there to save the brake shoes while turning the tires into dust
|
|
|
|
|
02-23-2021, 08:58 PM
|
#12 |
|
Registered User
Join Date: Jan 2005
Location: dartmouth,nova scotia,canada
Posts: 332
|
Re: residual valve 2 front lines
Hey cameo linelock is a good Tee.
|
|
|
|
|
02-25-2021, 05:01 PM
|
#13 |
|
Registered User
Join Date: Mar 2012
Location: Ardrossan Alberta
Posts: 67
|
Re: residual valve 2 front lines
i think what it saved me in fittings will be eaten up in rubber replacements
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
