Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-28-2024, 11:16 AM | #51 | |
landarts
Join Date: May 2005
Location: Star, Idaho
Posts: 1,332
|
Re: Super Cheyenne aka the "Devil Cowboy"
Quote:
Thanks Eric and I hope also. What is your plan for paint ? I have already bought the paint at the local Napa Auto paint store here in Meridian Idaho. That is where I had the dark blue matched from the radio delete plate you sent, the smaller quart can is the dark blue. The larger can is the medium blue, and thanks again for helping out! Single stage ? Yes, it is a single stage "Utech" by AkzoNobel. I have used this paint on a few trucks and really like how it sprays and the cost is not so bad. The DTM primer is black. Are you going all the way with paint, or are you going to send it out ? Yes I will do all the paintwork here in the garage
__________________
Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer |
|
Today, 08:22 AM | #52 |
landarts
Join Date: May 2005
Location: Star, Idaho
Posts: 1,332
|
Re: Super Cheyenne aka the "Devil Cowboy"
Took two days of rest and am now back at it. Decided to attack the last of the rust repair and metal work hopefully on the cab. I have one small spot on the door trim lip to address and a small area of the Captain's side kicker panel at the bottom.
Had a few challenges with the odd shapes and angles on this one. Then I had my welding wire issues on my new machine jamming up where it feeds to the gun on the inside. So what should have been an hour's worth of work to tackle these few turned into three to four hours. I guess it is part of the kicking and screaming these old trucks do when you are trying to bring them around. Hopefully, after a few adjustments, I can get through the last of the metal work on the cab and finish up the last round of sanding filler on the back and corners of the cab. If it fights back today I have a new welding hose inner sleeve made for the .023 wire I am using. The new machine inner sleeve was for .030 and .035 wire. Pic 1 -Hole in the cab to be repaired Pic 2 -Repaired and ground down Pic 3 -Holding the cut piece with tape, it would not set right with the magnet Pic 4 -Repaired and ground down Pic 5 -The mess after a few hours of work
__________________
Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer |
Bookmarks |
|
|