How common are............... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pont · 04-01-2002, 12:08 PM

67 Chevy big back window cabs? After finding my 67 SWB 4x4, I'm really fond of no side marker lights and like the looks of the big window instead of the small. After seeing pics of ProSt68Trk, I'm looking for a 2wd to build but prefer a 67 big back window.

Am I looking for the impossible? Should I just figure on finding a 68-newer cab and running a 67-68 front clip? I can always fill the side markers on a bed and order 67 front fenders. I appreciate your input on my delima.

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

[This message has been edited by Pont (edited April 01, 2002).]

Longhorn Man · 04-01-2002, 12:13 PM

You could get a '68 cab for your '67, but the large window '67 is a tough truvk to find...I dunno if I would say rare or not, but it is tough to find one.
Pesonally, I kinda like the small window. A pain to check traffic when doin 90 or so on the free way, but better lookin IMO.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

Pont · 04-01-2002, 12:16 PM

lol, thanks longhornmail, that info does help in my search. I appreciate it.

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

69 longhorn · 04-01-2002, 12:21 PM

If your are doing a custom or rod,every thing doesnt match anyway. I think I would go for a 68,then the cab & frame numbers match.....then just shave it. Good luck....69 longhorn.

Pont · 04-01-2002, 12:31 PM

Good idea 69 longhorn, I think I will go in that direction. By the way, what are 67-68 front clips worth? I know where there is 2 front clips but would like to have an idea of what they are worth before I start to deal. I know it will depend on conditon so lets just say that they are in decent condition, complete.

Thanks again..........

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

SCOTI · 04-01-2002, 01:18 PM

Pont... Using a newer big-window cab is how I'm building my 67 restorod now. Much easier to find a good 72 cab than it was finding a 67. I've seen all original front clips for 67-8 go from 200-500$ up but it depends on who your dealing with, their situation & their location.

Bo · 04-01-2002, 09:37 PM

I have always heard that they rare. So when I got my 67 SWB with a fact. big window and a.c. I thought it was rare till I saw one three house down from me. D@mn it ! It doesn't seem so rare now!

------------------
'67 Chevy SWB 454/400 under construction covers one city block!

Pont · 04-01-2002, 09:51 PM

Scoti, that may be the way I have to go. I'm not looking for anything original at all as this will be a resto/rod. Maybe I'll just use the cleanist 67-72 swb c10 I come across and stick a 67-68 nose on it.

Bo, I also have a 67 big window (no air) so if they are more common than we thought, I'll just have to keep my eyes open for another one.

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

Alexis · 04-01-2002, 10:23 PM

hmmm, never really notice, but my 67 is a big window,

------------------
Mechanic @ California Concept
Britney: 1970 2wd K/5 Blazer (Frame up)
Jessica: 1967 2wd SWB (pops daily driver)
Helga: 1972 4x4 3/4ton LWB (my daily driver)

AIM:Alexmart1
Mountain View, Cali

Pont · 04-01-2002, 10:26 PM

Alex, I'll take Jessica then. Your just down the road from me, I'll be there in about 6 hours

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

Rod · 04-01-2002, 10:39 PM

I have a 67 GMC big back window also... but I dont think it will get restored... its a complete truck now.... but it may be scarficed,,, sorry GMCPaul.

Pont · 04-01-2002, 10:44 PM

Why Rod? Is it that bad? I could just as easily build a GMC if any are ou there to be had. Yeh, not a bad idea, a 67 big window Chevy and a 67 big window GMC! I like it!

------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR

04-01-2002, 12:08 PM	#1
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	How common are............... 67 Chevy big back window cabs? After finding my 67 SWB 4x4, I'm really fond of no side marker lights and like the looks of the big window instead of the small. After seeing pics of ProSt68Trk, I'm looking for a 2wd to build but prefer a 67 big back window. Am I looking for the impossible? Should I just figure on finding a 68-newer cab and running a 67-68 front clip? I can always fill the side markers on a bed and order 67 front fenders. I appreciate your input on my delima. ------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR [This message has been edited by Pont (edited April 01, 2002).] __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

04-01-2002, 12:16 PM	#3
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	lol, thanks longhornmail, that info does help in my search. I appreciate it. ------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

04-01-2002, 12:21 PM	#4
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	If your are doing a custom or rod,every thing doesnt match anyway. I think I would go for a 68,then the cab & frame numbers match.....then just shave it. Good luck....69 longhorn. __________________ http://community.webshots.com/user/hotrodhorn

04-01-2002, 12:31 PM	#5
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Good idea 69 longhorn, I think I will go in that direction. By the way, what are 67-68 front clips worth? I know where there is 2 front clips but would like to have an idea of what they are worth before I start to deal. I know it will depend on conditon so lets just say that they are in decent condition, complete. Thanks again.......... ------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

04-01-2002, 01:18 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,914	Pont... Using a newer big-window cab is how I'm building my 67 restorod now. Much easier to find a good 72 cab than it was finding a 67. I've seen all original front clips for 67-8 go from 200-500$ up but it depends on who your dealing with, their situation & their location. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-01-2002, 12:13 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	You could get a '68 cab for your '67, but the large window '67 is a tough truvk to find...I dunno if I would say rare or not, but it is tough to find one. Pesonally, I kinda like the small window. A pain to check traffic when doin 90 or so on the free way, but better lookin IMO. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-01-2002, 09:37 PM	#7
Bo We Sell Truck Parts Join Date: Nov 2000 Location: Greenville,Texas Posts: 421	I have always heard that they rare. So when I got my 67 SWB with a fact. big window and a.c. I thought it was rare till I saw one three house down from me. D@mn it ! It doesn't seem so rare now! ------------------ '67 Chevy SWB 454/400 under construction covers one city block! __________________ '67 Chevy SWB 454/400 '97 Chevy Tahoe 4x4 '62 MG Midget

04-01-2002, 09:51 PM	#8
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Scoti, that may be the way I have to go. I'm not looking for anything original at all as this will be a resto/rod. Maybe I'll just use the cleanist 67-72 swb c10 I come across and stick a 67-68 nose on it. Bo, I also have a 67 big window (no air) so if they are more common than we thought, I'll just have to keep my eyes open for another one. ------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

04-01-2002, 10:23 PM	#9
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	hmmm, never really notice, but my 67 is a big window, ------------------ Mechanic @ California Concept Britney: 1970 2wd K/5 Blazer (Frame up) Jessica: 1967 2wd SWB (pops daily driver) Helga: 1972 4x4 3/4ton LWB (my daily driver) AIM:Alexmart1 Mountain View, Cali

04-01-2002, 10:26 PM	#10
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Alex, I'll take Jessica then. Your just down the road from me, I'll be there in about 6 hours ------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

04-01-2002, 10:39 PM	#11
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I have a 67 GMC big back window also... but I dont think it will get restored... its a complete truck now.... but it may be scarficed,,, sorry GMCPaul. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

04-01-2002, 10:44 PM	#12
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Why Rod? Is it that bad? I could just as easily build a GMC if any are ou there to be had. Yeh, not a bad idea, a 67 big window Chevy and a 67 big window GMC! I like it! ------------------ 67 SWB 4x4 - 396 BB / SM420 4 spd 8" lift / 15x14 Welds & 35X14.5 SSR's Grants Pass, OR __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.