White door handles for 2006 Crew Cab - part number?

[71swb4x4]

Does anyone know the part number for Summit White door handles? I want to replace the black ones on my crew cab. I do not want the white ones with the chrome pull on them, just the all white ones. I tried gmpartsdirect.com but without the part number I am out of luck.

[Josh]

I'll try and get them at work tommorow. I put a set of white ones on an avalanche not too long ago, looks sweeet.

[Jonboy]

It does make a pretty big difference. Here are before and after shots of mine.

[71swb4x4]

Thanks Josh.
Jon, it does really clean up the look a lot.

Does anyone know if you can remove the black bed side rails? I am putting a topper on mine and I don't want that black line breaking everything up.

[Joe67]

Checkout www.partszoneonline.com for the door handles, better service and shipping prices then GMPD.com

I have they body color handles on my Sierra, they look much better.
The Escalade handles look even better with the chrome handle IMO.

While you are replacing the door handles, that is a good time to invest in a set of Jimmi Jammer anti-theft plates. See my webpage at www.TruckTechniques.com for details

Your bed rail caps are held on with 2 way tape. Use a heat gun to heat them up while you are removing them.
Try not to damage them when removing them and sell them on ebay. I bought a new set from GM for my Sierra



I also sanded and painted my tailgate handle bezel to match
You can do the handle, but I left it black to match my tailgate and bumper caps

[Jonboy]

The quarter panels on the 5.5 foot bed are made to have the quarter panel caps. If you pull them off, you will have a bunch of holes. If you do not have the ultrashort bed, disregard that. My truck in the pictures has the 5.5 foot bed.

[71swb4x4]

Joe - I was able to order a white tailgate handle too. Everything is on the way.

Josh - I don't need the part numbers but you should still post them if you have them, someone else may need them.

Jon - I have the 5.5 ft bed too. I may have to sand the caps down and have them painted. We'll see, if I ever took the topper off the bed rails would get scratched easily if they were painted, so that may not be the right solution.