Blazer parts you can't buy aftermarket. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Sand Wrench** · 01-23-2018, 11:32 PM

Shout out your favorite hard to find Blazer parts! I'll start with Spicer locking hubs.

jeffg1010 · 01-24-2018, 05:41 AM

Those stupid little screws that go on the door interior. I cant even think of what they're called but theyre like gold.

rsavage · 01-24-2018, 07:10 AM

Quote:

Originally Posted by jeffg1010

Those stupid little screws that go on the door interior. I cant even think of what they're called but theyre like gold.

These without the plastic are available

https://www.classicindustries.com/pr...s/a510016.html

**1rippen6** · 01-24-2018, 08:38 AM

Reinforcement plates for the doors and bucket seat channel under the floor!

twp1 · 01-24-2018, 08:44 AM

Fiberglass Tops!!!!

Mike C · 01-24-2018, 09:37 AM

Bucket seat tracks and folding latch.

**mrtoni** · 01-24-2018, 10:14 AM

Leveling mat, sliding windows (not oem but rare)

**1rippen6** · 01-24-2018, 10:29 AM

Quote:

Originally Posted by Mike C

Bucket seat tracks and folding latch.

Folding latch is reproduced now lookup Utahboy in the for sale section. Actually its the catch that is reproduced sorry.

ls1nova71 · 01-24-2018, 11:22 AM

The chrome strips that go above the rear door panels on a CST. Oh, and top hold down brackets! And sunvisors and sunvisor screws, rear carpet strips, the list goes on...

cleszkie · 01-24-2018, 02:29 PM

How about the entire Blazer tub? Seeing as how prices are going up on original steel, I bet its only a matter of time before someone like Dynacorn starts re-popping the entire tub.

cleszkie · 01-24-2018, 02:31 PM

Quote:

Originally Posted by twp1

Fiberglass Tops!!!!

Someone already re-pops the fiberglass hatch and its a POS. I'm afraid of what the top would end up like if it was re-popped.

cleszkie · 01-24-2018, 02:34 PM

I got it - the rear tail light portions of the quarter panels. From the turn signal to the tail light housing only. They only re-pop the suburban tail light portion right now.

hemi43 · 01-24-2018, 02:48 PM

Quote:

Originally Posted by cleszkie

How about the entire Blazer tub? Seeing as how prices are going up on original steel, I bet its only a matter of time before someone like Dynacorn starts re-popping the entire tub.

God I hope this never happens ! I really don't want to see fake Blazers running around. If this ever happened, the value of our trucks would plummet.

saskred · 01-24-2018, 04:14 PM

Quote:

Originally Posted by hemi43

God I hope this never happens ! I really don't want to see fake Blazers running around. If this ever happened, the value of our trucks would plummet.

I'm pretty sure I was reading a thread a while back where someone here is well into completing the process on making the whole tub. Also the rear carpet strips are available and are made by a member here. And they look like excellent quality.

k-nuts · 01-24-2018, 04:29 PM

I don't think it changed the value of 1st gen Camaros or Firebirds. But one would need to be careful when buying, especially rare option models.

Quote:

Originally Posted by hemi43

God I hope this never happens ! I really don't want to see fake Blazers running around. If this ever happened, the value of our trucks would plummet.

Posted via Mobile Device

Lieferson · 01-24-2018, 04:52 PM

Quote:

Originally Posted by hemi43

God I hope this never happens ! I really don't want to see fake Blazers running around. If this ever happened, the value of our trucks would plummet.

Can make new tubs, cant make new vins! Im sure theres plenty of guys on here that have replaced damn near the whole tub already LOL

ls1nova71 · 01-24-2018, 09:55 PM

Quote:

Originally Posted by saskred

Also the rear carpet strips are available and are made by a member here. And they look like excellent quality.

Nope, the rear are different, what was for sale on here were front strips, but some people use them at both ends. The original rear strip holds the rear weatherstrip in as well as holding the carpet down.

Paintpro · 01-24-2018, 10:05 PM

I have one die made to reproduce the Lh door reinforcement plate. Just wondering how many people would be interested in them before I have the other side made.

**1rippen6** · 01-24-2018, 10:10 PM

Quote:

Originally Posted by ls1nova71

Nope, the rear are different, what was for sale on here were front strips, but some people use them at both ends. The original rear strip holds the rear weatherstrip in as well as holding the carpet down.

The rear is made also and very good quality same guy that reproduced the front.

http://67-72chevytrucks.com/vboard/s...hlight=utahboy

toomany2yz · 01-24-2018, 10:11 PM

Quote:

Originally Posted by Lieferson

Can make new tubs, cant make new vins! Im sure theres plenty of guys on here that have replaced damn near the whole tub already LOL

I'm one of them. I did everything except the firewall, and even that I had to do both lower A-pillars. I even thought about replacing the firewall but decided against it.

Cab floor, step up pannel, rear bed floor, both quarters, rockers, rocker boxes. Haven't bought it yet, but I'll probably do a repop tailgate too. My doors, hood, fenders and core support are all in really good rust free shape for some odd reason though.

I thought I saw somewhere there was a guy building one from completley aftermarket parts. It's do-able, but it's like a giant puzzle. The good thing, at least for me, has been that so far all the aftermarket stuff is playing nicely with eachother.

ls1nova71 · 01-24-2018, 11:38 PM

Quote:

Originally Posted by 1rippen6

The rear is made also and very good quality same guy that reproduced the front.

http://67-72chevytrucks.com/vboard/s...hlight=utahboy

Wow! I totally missed those, and they look great! Too bad I don't need one anymore, the story of my life....

**Blazerowner** · 01-25-2018, 12:21 AM

You should just pick one up for a spare. I bought two of each and they are top notch. I figure what if I ever pick up another Blazer. Might as well have a spare in the attic just incase.

Quote:

Originally Posted by ls1nova71

Wow! I totally missed those, and they look great! Too bad I don't need one anymore, the story of my life....

Huggerorangeblood · 01-26-2018, 02:49 AM

What about top delete pieces?

**richard2717** · 01-28-2018, 03:26 PM

Rear seat floor brackets

jaros44sr · 01-28-2018, 07:43 PM

I'd really to see tilt steering column bearings become available, there like hensteeth now. Mine are new, but down the road, who knows if they will be available. I got my last set from Wes, they were his last

01-23-2018, 11:32 PM	#1
Sand Wrench Senior Member Join Date: Sep 2016 Location: Garnett, Kansas Posts: 279	Blazer parts you can't buy aftermarket. Shout out your favorite hard to find Blazer parts! I'll start with Spicer locking hubs.

01-24-2018, 05:41 AM	#2
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Re: Blazer parts you can't buy aftermarket. Those stupid little screws that go on the door interior. I cant even think of what they're called but theyre like gold. __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

01-24-2018, 08:38 AM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,693	Re: Blazer parts you can't buy aftermarket. Reinforcement plates for the doors and bucket seat channel under the floor!

01-24-2018, 08:44 AM	#5
twp1 Registered User Join Date: Aug 2014 Location: Arkansas Posts: 351	Re: Blazer parts you can't buy aftermarket. Fiberglass Tops!!!!

01-24-2018, 09:37 AM	#6
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,709	Re: Blazer parts you can't buy aftermarket. Bucket seat tracks and folding latch. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

01-24-2018, 10:14 AM	#7
mrtoni Senior Member Join Date: Jan 2009 Location: sparks, nevada Posts: 1,879	Re: Blazer parts you can't buy aftermarket. Leveling mat, sliding windows (not oem but rare)

01-24-2018, 11:22 AM	#9
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,117	Re: Blazer parts you can't buy aftermarket. The chrome strips that go above the rear door panels on a CST. Oh, and top hold down brackets! And sunvisors and sunvisor screws, rear carpet strips, the list goes on... __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-24-2018, 02:29 PM	#10
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: Blazer parts you can't buy aftermarket. How about the entire Blazer tub? Seeing as how prices are going up on original steel, I bet its only a matter of time before someone like Dynacorn starts re-popping the entire tub.

01-24-2018, 02:34 PM	#12
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: Blazer parts you can't buy aftermarket. I got it - the rear tail light portions of the quarter panels. From the turn signal to the tail light housing only. They only re-pop the suburban tail light portion right now.

01-24-2018, 10:05 PM	#18
Paintpro Registered User Join Date: Nov 2008 Location: Hermann, MO Posts: 28	Re: Blazer parts you can't buy aftermarket. I have one die made to reproduce the Lh door reinforcement plate. Just wondering how many people would be interested in them before I have the other side made.

01-26-2018, 02:49 AM	#23
Huggerorangeblood Registered User Join Date: Apr 2011 Location: Corvallis, Or Posts: 119	Re: Blazer parts you can't buy aftermarket. What about top delete pieces?

01-28-2018, 03:26 PM	#24
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,867	Re: Blazer parts you can't buy aftermarket. Rear seat floor brackets __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-28-2018, 07:43 PM	#25
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Blazer parts you can't buy aftermarket. I'd really to see tilt steering column bearings become available, there like hensteeth now. Mine are new, but down the road, who knows if they will be available. I got my last set from Wes, they were his last __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.