Detroit Diesel Thread - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OutlawDrifter · 10-10-2015, 02:23 PM

No, those are super rare. Not many around.

C10 - C90 Bill · 10-17-2015, 10:22 PM

'72 Chevy Titan with a 12V-71:

You Tube

**special-K** · 10-19-2015, 07:38 AM

Buzzin' Dozen. I haven't watched tv for weeks but last night I flicker 'er on and came across Ice Road Truckers. Haven't seen that show in years. The episode took place when there was an early thaw from unusually higher temps. The one feller was pulling doubles, was tight on time due to the thaw, and had to run through a stretch that doubles aren't allowed. No time to make two runs out of it he hooked up with that "King of Obsolete" guy (I'm surprised we've never started a thread on him). He was running a Louisville obviously powered by Detroit. Made the show 10x better hearing that rig buzz on by

**Bob B.** · 10-21-2015, 03:22 AM

I believe there were few '58-'59 GMC's built with 4-71T's and 6-71T's. I think they were different than later turbo'ed Detroits, didn't use a bypass blower. Supposedly made a lot of power, for a little while anyway....

greywuuf · 10-31-2015, 04:08 AM

going to try one more time to "embed" a video ... if it works I may make a ride along video this weekend.

You Tube

greywuuf · 10-31-2015, 05:06 AM

in post #40..... that is my engine, it had been run only briefly at that time ( I mean we drug it out of the hole it was in, fired it up and drove it to a flat spot in the yard... notice there are no belts on the water pump...) I am assuming that oily greasy mess is either a valve cover gasket or from "wet stacking" as they call it even now I notice that the joint from the pipe to the exhaust manifold is pretty wet and nasty looking, is that what they are talking about on wet stack ?

**davischevy** · 10-31-2015, 09:49 PM

I don't know about wet stacking, but I do know that sound. All I can say is , cool.

greywuuf · 11-01-2015, 06:59 PM

Sorry guys, no new video, Temps dropped to zero (F) overnight, and that 5 gallons of fresh 40 weight is to much for my class 31 battery, going to try to get a fresh 8D this week and see if I can spin her with that....and think about some pan heaters....

**davischevy** · 11-01-2015, 09:08 PM

You probably don't want to hear about me raking leaves in a t shirt?

C10 - C90 Bill · 03-11-2016, 08:29 PM

Sweet sounding 6-71:

You Tube

**special-K** · 12-26-2017, 08:16 AM

Got any more?

C10 - C90 Bill · 12-26-2017, 10:14 AM

Quote:

Originally Posted by special-K

Got any more?

I've added a few more over at the other thread we have going, but the last time I checked, no new ones lately.

Nothing real good anyway, lol.

http://67-72chevytrucks.com/vboard/s...=588548&page=3

**special-K** · 12-26-2017, 11:32 AM

I came across this searching for videos I've posted from Photobucket. I wanted to see if those show now that I did a fix that makes pictures show again. Trying to figure out how to grab "my" videos that P-bucket is holding ransom. I can get the pictures but not the videos.

*Peanutbutter* · 01-30-2018, 12:35 AM

Hello all, been gone along long long time but thought I might wander back. I picked up some new additions over the last couple of years, heres one. Part tonite and part tomorrow nite, having to relearn uploading pics all over again. This is taking some time, might make more sense tomorrow so bere with me.

*Peanutbutter* · 01-30-2018, 08:08 PM

OK, continuing from last nite. Picked this 1979 GMC 7000 with a 453T and clark 5 speed in Utah couple months ago. Been looking for one of these since 1988 when I sold my snowcat hauling truck. Not sure where to put it yet. I do have a 1982 GMC 7000 4x4 American coleman on 10 hole budds. Its has a goodwrench 427 in it right now but the 453T would sound a lot better. Besides, this is to short of wheelbase for me.

**special-K** · 01-30-2018, 08:21 PM

Hey you character (aren't I nice?), where the hell ya been? I've wondered about what you from time to time. That's a neat little mill there. Would be nice in that Coleman job.

*Peanutbutter* · 01-30-2018, 08:47 PM

Don't ask me where I;ve been because I don't know, I tend to go in spurts. I guess I been missing out on lots of fun. Has'nt stopped me from dragging home more projects. I've got couple more you might find interesting, give me couple hours, maybe I can get another one up.

USSkoval · 01-30-2018, 09:55 PM

I love this thread, reminds me of when I was a kid. In elementary school, there was an active quarry just a couple miles away. You could hear those screaming dump trucks driving past several times a day. A very distinctive sound that even a kid will notice.

Robert1970C20rstbukt · 01-30-2018, 11:00 PM

Very cool find, would definitely save those fender badges!

*Peanutbutter* · 01-31-2018, 12:06 AM

I'm missing one of the Sierra badges and I don'nt know how hard its going to be to find.

Airdirect · 01-31-2018, 01:39 PM

Peanutbutter,

I can help you with the wheel base...

http://67-72chevytrucks.com/vboard/s...d.php?t=721374

Seeing yours is inspiring me to get mine finished. I plan to shorten the frame (currently 24' cab to end of frame) and install a rollback bed for hauling antique tractors.

David

10-10-2015, 02:23 PM	#51
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,775	Re: Detroit Diesel Thread No, those are super rare. Not many around. __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

10-19-2015, 07:38 AM	#53
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Detroit Diesel Thread Buzzin' Dozen. I haven't watched tv for weeks but last night I flicker 'er on and came across Ice Road Truckers. Haven't seen that show in years. The episode took place when there was an early thaw from unusually higher temps. The one feller was pulling doubles, was tight on time due to the thaw, and had to run through a stretch that doubles aren't allowed. No time to make two runs out of it he hooked up with that "King of Obsolete" guy (I'm surprised we've never started a thread on him). He was running a Louisville obviously powered by Detroit. Made the show 10x better hearing that rig buzz on by __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-21-2015, 03:22 AM	#54
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,306	Re: Detroit Diesel Thread I believe there were few '58-'59 GMC's built with 4-71T's and 6-71T's. I think they were different than later turbo'ed Detroits, didn't use a bypass blower. Supposedly made a lot of power, for a little while anyway.... __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

10-31-2015, 05:06 AM	#56
greywuuf Registered User Join Date: Jul 2007 Location: Alaska Posts: 516	Re: Detroit Diesel Thread in post #40..... that is my engine, it had been run only briefly at that time ( I mean we drug it out of the hole it was in, fired it up and drove it to a flat spot in the yard... notice there are no belts on the water pump...) I am assuming that oily greasy mess is either a valve cover gasket or from "wet stacking" as they call it even now I notice that the joint from the pipe to the exhaust manifold is pretty wet and nasty looking, is that what they are talking about on wet stack ?

10-31-2015, 09:49 PM	#57
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,786	Re: Detroit Diesel Thread I don't know about wet stacking, but I do know that sound. All I can say is , cool. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

11-01-2015, 06:59 PM	#58
greywuuf Registered User Join Date: Jul 2007 Location: Alaska Posts: 516	Re: Detroit Diesel Thread Sorry guys, no new video, Temps dropped to zero (F) overnight, and that 5 gallons of fresh 40 weight is to much for my class 31 battery, going to try to get a fresh 8D this week and see if I can spin her with that....and think about some pan heaters....

11-01-2015, 09:08 PM	#59
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,786	Re: Detroit Diesel Thread You probably don't want to hear about me raking leaves in a t shirt? __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

12-26-2017, 08:16 AM	#61
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Detroit Diesel Thread Got any more? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-26-2017, 11:32 AM	#63
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Detroit Diesel Thread I came across this searching for videos I've posted from Photobucket. I wanted to see if those show now that I did a fix that makes pictures show again. Trying to figure out how to grab "my" videos that P-bucket is holding ransom. I can get the pictures but not the videos. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-30-2018, 12:35 AM	#64
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: Detroit Diesel Thread Hello all, been gone along long long time but thought I might wander back. I picked up some new additions over the last couple of years, heres one. Part tonite and part tomorrow nite, having to relearn uploading pics all over again. This is taking some time, might make more sense tomorrow so bere with me. Attached Images

01-30-2018, 08:08 PM	#65
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: Detroit Diesel Thread OK, continuing from last nite. Picked this 1979 GMC 7000 with a 453T and clark 5 speed in Utah couple months ago. Been looking for one of these since 1988 when I sold my snowcat hauling truck. Not sure where to put it yet. I do have a 1982 GMC 7000 4x4 American coleman on 10 hole budds. Its has a goodwrench 427 in it right now but the 453T would sound a lot better. Besides, this is to short of wheelbase for me. Attached Images

01-30-2018, 08:21 PM	#66
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Detroit Diesel Thread Hey you character (aren't I nice?), where the hell ya been? I've wondered about what you from time to time. That's a neat little mill there. Would be nice in that Coleman job. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-30-2018, 08:47 PM	#67
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: Detroit Diesel Thread Don't ask me where I;ve been because I don't know, I tend to go in spurts. I guess I been missing out on lots of fun. Has'nt stopped me from dragging home more projects. I've got couple more you might find interesting, give me couple hours, maybe I can get another one up.

01-30-2018, 09:55 PM	#68
USSkoval Registered User Join Date: Jul 2009 Location: West Jefferson, OH Posts: 999	Re: Detroit Diesel Thread I love this thread, reminds me of when I was a kid. In elementary school, there was an active quarry just a couple miles away. You could hear those screaming dump trucks driving past several times a day. A very distinctive sound that even a kid will notice. __________________ -Andy '77 K5 Blazer '78 K10 Shortbed '78 C20 Suburban '79 K30 Crew Cab Dually '84 C10 Short Stepside '88 K20 Suburban

01-30-2018, 11:00 PM	#69
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: Detroit Diesel Thread Very cool find, would definitely save those fender badges! __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck



Register or Log In To remove these advertisements.

01-31-2018, 12:06 AM	#70
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: Detroit Diesel Thread I'm missing one of the Sierra badges and I don'nt know how hard its going to be to find.

01-31-2018, 01:39 PM	#71
Airdirect Registered User Join Date: Oct 2016 Location: Powderly Texas Posts: 292	Detroit Diesel Thread Peanutbutter, I can help you with the wheel base... http://67-72chevytrucks.com/vboard/s...d.php?t=721374 Seeing yours is inspiring me to get mine finished. I plan to shorten the frame (currently 24' cab to end of frame) and install a rollback bed for hauling antique tractors. David

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.