The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-05-2017, 10:48 PM   #1
adis
Registered User
 
Join Date: Aug 2013
Location: Annapolis, MD
Posts: 65
N203 Slop

i took the TC out of my K20 to rebuild the trans. im debating on rebuilding the 203 since it's out and i have no idea what shape it's in. all i know is that it's got a part-time kit in it, other than that, i've only put about 100 miles on the truck since i bought it and that was in rwd. so, the first thing im looking at before i tear into it is the slop between the shafts. between the input and rear output shafts it seems pretty tight - about 5* of play. between the input and front output shafts there is a lot more - like 28* of play (a little more than 1/16 of a turn. ) does this seem excessive? if i need to replace the chain, i'd consider a 205 swap. but if this is an acceptable amount of play, then i'll go ahead with the rebuild. any thoughts/advice is appreciated. - mark
__________________
'76 K20 Camper Special (CKU2461 8400 GVW)
400/350 Dana44/203/GM14
adis is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com