Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-14-2019, 12:06 AM | #1 |
Junior Member
Join Date: Nov 2018
Location: Kirkwood, PA
Posts: 92
|
Gear reduction starter
I bought a gear reduction starter from napa that I'm pretty sure is configured wrong for my '72 402 BB. My block has 3 starter mount holes, so I assumed either straight or staggered pattern would fit. Wrong. when the starter is on, it looks like the edge of the flywheel is about center of the armature shaft. So , I'm thinking this starter must be for a 153 tooth small flywheel and I have a 168 tooth big flywheel. Can a different block be mounted on this starter to make it work?
|
01-15-2019, 07:59 PM | #2 |
Registered User
Join Date: May 2016
Location: Henderson NC
Posts: 975
|
Re: Gear reduction starter
Why not take it back and get the right starter.
|
01-15-2019, 08:15 PM | #3 |
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: Gear reduction starter
agreed .... way over thinking it .
big block should be the bigger tooth count gear . you need a staggered bolt pattern unit . straight bolt pattern units = small count . now you say you have 3 bolt holes are we talking on the block face or cast iron bell housing were the starter bolts on ? these are 2 totally different systems .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
Bookmarks |
|
|