MD LH 69-72 Fender - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**davischevy** · 06-19-2018, 11:17 PM

Quote:

Originally Posted by special-K

I'm pulling a lot of legs here. That was a few years ago and that's my buddy Jason's truck. I had a guy I know offer up all his parts and I put Jason onto it. This was when he dropped me off. I have no use for so many parts. That piece of upper molding straightened right out, and everything else I post from now on will be true!

I have guests coming this weekend. I need to go out and clean the yard up

I'm going to unfriend you K.

**atog** · 06-19-2018, 11:42 PM

If your yard looks like that I can be there in 6hrs to help clean and bring some Benjamin’s to help

**special-K** · 06-19-2018, 11:45 PM

Was that your trim?

Hey Rob, I ended up deciding to pass on Macungie. Very hard decision. I'm busy with work yet money got tight due to a few things. Only one solution for that... work! I'm helping a friend/member (yes, I have two!) in Highspire, PA, which is right about 1/2 way between. I had a plan to work there Friday, cut out early for Macungie, camp there, see the show on Sat, and go back to Highspire that evening. But this is a side job that has been drawn out due to 6 rainy weekends and I need to get my weekends freed up!

**atog** · 06-19-2018, 11:45 PM

Quote:

Originally Posted by davischevy

I figured that was your rig hauling all that.

Mine would be overloaded before I left

**special-K** · 06-20-2018, 07:18 AM

That was a ridiculously good deal. Funny to see going down the road I bet. I got a few things out of it, but Jason got a hoard. You can see his truck is loaded down a bit. You should have seen what all he managed to stuff in the back seat of that leather interior! I think I rode with parts on my lap and under my seat. We had to wear hubcaps as hats because we ran out of room

**davischevy** · 06-20-2018, 11:02 AM

Quote:

Originally Posted by atog

If your yard looks like that I can be there in 6hrs to help clean and bring some Benjamin’s to help

So thoughtful.

I sold a 56 Nomad project to a guy in Maryland. When he left here that wagon was packed like a sardine can and his truck was loaded. No pictures though, so I guess it didn't happen.

**special-K** · 06-22-2018, 07:04 AM

I don't have any pictures of having sex with my ex-wife, either. But I have a son

*

*No, no pictures of her having sex with the mailman either

**special-K** · 06-25-2018, 07:46 AM

I said I DON'T HAVE those pictures. No need to run off!! Here are pictures of my son and even one with my ex-wife to prove THAT happened. Even have a grandson.

Now somebody buy this crap so I can leave them an inheritance! (What was it I was selling?)

**special-K** · 07-01-2018, 08:11 AM

I guess you're waiting for pictures of my grandson, or THAT didn't happen

Last summer:
Name: IMG_2038.jpg
Views: 131
Size: 68.4 KB

Name: IMG_2043.jpg
Views: 137
Size: 54.2 KB

Last weekend:
Name: IMG_3323.jpg
Views: 132
Size: 57.0 KB

And here is a picture of that fender again to show being for sale really is hapPENING! Ha Ha! I haven't had time, but maybe today I'm going to see if I can't get the rest of the paint off (the outside) to clearly show it's condition. I'll get the others out for individual pictures, too.
Name: IMG_3226.jpg
Views: 128
Size: 100.6 KB

Name: IMG_3226.jpg
Views: 128
Size: 100.6 KB

**special-K** · 07-04-2018, 08:44 PM

Didn't get a chance yet to finish stripping. I figured people could see how good it is as it sits. I have other passenger fenders and some of those I will strip, too, if they aren't original paint.

**special-K** · 07-19-2018, 02:16 PM

I got the paint off that fender, pictures coming soon. In the meantime... Midnight Auto Parts, Inc

**special-K** · 07-21-2018, 10:17 AM

I got the fender down to bare metal. It's raining now, but I want to get it out and show pictures. Nice fender and I have at least one other of each design ('67, '68 Chevy/68-72 GMC, and 69-72 Chevy) from driver side... $125

Hotrodshovel · 07-25-2018, 09:28 PM

Will you send me picks of the 67 fender when you have a chance?

**special-K** · 07-25-2018, 09:35 PM

Ok, I'll get it out tomorrow

**special-K** · 08-15-2018, 08:18 AM

... and tomorrow never came. Bringing this back so I can add the pictures. Fenders were stashed back but now can get to it easier.

**special-K** · 12-30-2018, 09:05 AM

Well, still never got pictures of that fender stripped bare. I forgot about taking it to the truck show and the fall Carlisle events. I lost my camera, too. Still bare with no surface rust starting in all those months. Got a call from a fellow member in PA looking for such a fender (because the repro he bought is 'that' bad) and as of Friday it has been SOLD!

I sold a lot of the stuff in pictures I showed for sake of entertainment (cheap plug is what it really was) but still have a couple passenger doors (1-'67 & 1-'72) and drivers fenders ('68 Chevy/GMC). My daughter gave me a camera but I don't have the charger yet. I'll start a thread when I can get pictures.

06-19-2018, 11:42 PM	#27
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,530	Re: LH 69-72 Fender If your yard looks like that I can be there in 6hrs to help clean and bring some Benjamin’s to help

06-19-2018, 11:45 PM	#28
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender Was that your trim? Hey Rob, I ended up deciding to pass on Macungie. Very hard decision. I'm busy with work yet money got tight due to a few things. Only one solution for that... work! I'm helping a friend/member (yes, I have two!) in Highspire, PA, which is right about 1/2 way between. I had a plan to work there Friday, cut out early for Macungie, camp there, see the show on Sat, and go back to Highspire that evening. But this is a side job that has been drawn out due to 6 rainy weekends and I need to get my weekends freed up! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-20-2018, 07:18 AM	#30
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender That was a ridiculously good deal. Funny to see going down the road I bet. I got a few things out of it, but Jason got a hoard. You can see his truck is loaded down a bit. You should have seen what all he managed to stuff in the back seat of that leather interior! I think I rode with parts on my lap and under my seat. We had to wear hubcaps as hats because we ran out of room __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-22-2018, 07:04 AM	#32
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender I don't have any pictures of having sex with my ex-wife, either. But I have a son * No, no pictures of her having sex with the mailman either __________________ "BUILDING A BETTER WAY TO SERVE* THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-25-2018, 07:46 AM	#33
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender I said I DON'T HAVE those pictures. No need to run off!! Here are pictures of my son and even one with my ex-wife to prove THAT happened. Even have a grandson. Now somebody buy this crap so I can leave them an inheritance! (What was it I was selling?) Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-01-2018, 08:11 AM	#34
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender I guess you're waiting for pictures of my grandson, or THAT didn't happen Last summer: Last weekend: And here is a picture of that fender again to show being for sale really is hapPENING! Ha Ha! I haven't had time, but maybe today I'm going to see if I can't get the rest of the paint off (the outside) to clearly show it's condition. I'll get the others out for individual pictures, too. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-01-2018 at 08:23 AM.

07-04-2018, 08:44 PM	#35
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender Didn't get a chance yet to finish stripping. I figured people could see how good it is as it sits. I have other passenger fenders and some of those I will strip, too, if they aren't original paint. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-21-2018 at 11:39 AM.

07-19-2018, 02:16 PM	#36
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender I got the paint off that fender, pictures coming soon. In the meantime... Midnight Auto Parts, Inc Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-21-2018, 10:17 AM	#37
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender I got the fender down to bare metal. It's raining now, but I want to get it out and show pictures. Nice fender and I have at least one other of each design ('67, '68 Chevy/68-72 GMC, and 69-72 Chevy) from driver side... $125 __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-25-2018, 09:28 PM	#38
Hotrodshovel Registered User Join Date: Mar 2014 Location: Appling, GA Posts: 21	Re: LH 69-72 Fender Will you send me picks of the 67 fender when you have a chance?

07-25-2018, 09:35 PM	#39
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender Ok, I'll get it out tomorrow __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-15-2018, 08:18 AM	#40
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender ... and tomorrow never came. Bringing this back so I can add the pictures. Fenders were stashed back but now can get to it easier. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-30-2018, 09:05 AM	#41
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: LH 69-72 Fender Well, still never got pictures of that fender stripped bare. I forgot about taking it to the truck show and the fall Carlisle events. I lost my camera, too. Still bare with no surface rust starting in all those months. Got a call from a fellow member in PA looking for such a fender (because the repro he bought is 'that' bad) and as of Friday it has been SOLD! I sold a lot of the stuff in pictures I showed for sake of entertainment (cheap plug is what it really was) but still have a couple passenger doors (1-'67 & 1-'72) and drivers fenders ('68 Chevy/GMC). My daughter gave me a camera but I don't have the charger yet. I'll start a thread when I can get pictures. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.