1960-1972 Lowering Block U bolts

[ReidCagle]

I've found lowering block kits with u-bolts and hardware cheaper online bit I would rather support fellow forum members... and I've found they are a much more knowledgable resource for information and how-to.

Having said that, I would like a 2" blocks and u-bolt kit. I think that will work well with 4" drop springs without having to relocate spring mounts or c-notching the frame... any thoughts?

Still $69.95 to way2lo2@aol.com?

[way2lo2]

Originally Posted by ReidCagle

I've found lowering block kits with u-bolts and hardware cheaper online bit I would rather support fellow forum members... and I've found they are a much more knowledgable resource for information and how-to.

Having said that, I would like a 2" blocks and u-bolt kit. I think that will work well with 4" drop springs without having to relocate spring mounts or c-notching the frame... any thoughts?

Still $69.95 to way2lo2@aol.com?

I'm pretty sure with any load in the bed or a good pot hole, you're going to be bumping the axle tubes into the frame unless you ad a c notch. But I do still have the blocks at 69.95 and the email is correct.
Thanks

[tonythezeek]

i also would be interested in a set of 2 inch blocks with bolts.
pretty pretty please with a big ole strawberry (or whatever floats your boat) on top!

[way2lo2]

Originally Posted by tonythezeek

i also would be interested in a set of 2 inch blocks with bolts.
Pretty pretty please with a big ole strawberry (or whatever floats your boat) on top!

in stock, 69.95 shipped

[jondancer]

Any 1.5" blocks by chance? Thanks

[Eddy63]

Interested in 2" kit paypal done shortly

[rubicon03]

How much for u bolts? I made my own blocks outta some 2x2 square stock and truck shop here don't make them

[way2lo2]

Originally Posted by rubicon03

How much for u bolts? I made my own blocks outta some 2x2 square stock and truck shop here don't make them

$45 shipped

[DarkKnightWong]

Hi

Do you sell pinion shims also ? I have 4 inch springs and thinking about adding 2 inch blocks. Do you sell shims to correct the pinion angle also ?

Thanks
Alleb

[dave`12]

Hello. I have a 67 c10 1/2 ton fleetside with coil rear suspension and drum brakes. It has the "helper leaf".

It sits high in the back. I'm thinking that these trucks are 2 inches higher in the back?

I see everyone asking for the 69.95, shipped 2" blocks and bolts. So if I get this, can I leave the front alone and
end up with a level ride? Should I leave the helper leaf alone?


Thanx

[way2lo2]

Originally Posted by dave`12

Hello. I have a 67 c10 1/2 ton fleetside with coil rear suspension and drum brakes. It has the "helper leaf".

It sits high in the back. I'm thinking that these trucks are 2 inches higher in the back?

I see everyone asking for the 69.95, shipped 2" blocks and bolts. So if I get this, can I leave the front alone and
end up with a level ride? Should I leave the helper leaf alone?


Thanx

yes, we have them in stock 69.95 for the kit and that includes shipping. Paypal accepted at Way2Lo2@aol.com or you can call the shop 216-289-1493

[zteca]

any 1.5 kits? or what would you recommend for a bagged rear with a mild cnotch?

[way2lo2]

Originally Posted by zteca

any 1.5 kits? or what would you recommend for a bagged rear with a mild cnotch?

sorry just the 1" or 2". Typically use a 2" on bagged trucks

[coolfool_2]

Good morning, interested in 2 inch lowering kit, blocks and u bolts for a 1960. Is this kit currently available?

[bigpetie]

would a 3" block scrub with the bolt cut off on a 15" with a 30" tire ???

[68 P.O.S.]

Interested in a 2" complete set shipped to 98467. Thank you!

[the_real_dock]

$ sent via PayPal for a pair of 2" blocks/u-bolts to 37914.

Thanks!

[way2lo2]

Originally Posted by the_real_dock

$ sent via PayPal for a pair of 2" blocks/u-bolts to 37914.

Thanks!

on the way!

[fast2002]

do you still offer the U bolts for 2 inch drop? e-mail me at bbsports@msn.com

Cal

[stexag]

I found this thread and saw it doesn't get a lot of recent traffic; don't let that fool you. I called way2low2 to see if he still offered these bolts, he does, and he did. I paid him and the bolts beat the some other parts I'd bought elsewhere by a day or two.

Many thanks to the OP!

[71Charlie10]

Could you tell me how much for 2" block kit shipped to 32548. thanks

[way2lo2]

Originally Posted by 71Charlie10

Could you tell me how much for 2" block kit shipped to 32548. thanks

69.95 shipped

[Trever6]

price shipped to 42164 Kentucky? 2” with bolts and all.
Posted via Mobile Device

[evoLnivleK]

Do you still offer the 2" kit? Thanks.

[way2lo2]

Originally Posted by evoLnivleK

Do you still offer the 2" kit? Thanks.

yes sir, we always have these in stock.