The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-04-2020, 09:35 PM   #1
Clatterville trolley
Senior Member
 
Clatterville trolley's Avatar
 
Join Date: Apr 2013
Location: Columbia, MO
Posts: 1,922
350 crate engine questions

My build is progressing somewhat and I am looking ahead to my power plant.

I have a 350 crate motor with 4 bolt mains - not sure of year produced - that I planned to use when I get to that point.

The previous owner of the engine drove the truck it came out of into his shop and around some before pulling it in favor of an LS swap.

I need to state up front that all I am interested in is a dependable, serviceable engine. No street monster with loping cam. I plan an Edlebrock aluminum intake and headers as only changes from stock at this point.

I am capable and confident of my skills at rebuilding this engine, but wonder if I would be better served as well as coming out ahead dollar wise purchasing another crate engine new and selling the one I have?

It would seem to save time over the term of my build and not knowing for sure what lurks in the internals of the current engine and worrying about cost of machine work to get it in stable condition I'm thinking I might be money ahead??

Comments - advise - criticisms??

Thanks! Jay
__________________
PayPal 1windyridgeboy@gmail.com
Clatterville trolley is offline   Reply With Quote
Old 11-04-2020, 10:15 PM   #2
truckster
Senior Member
 
truckster's Avatar
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,761
Re: 350 crate engine questions

If you have no idea of how many miles it has on it, run a compression and leak-down test. You could also bore scope the cylinders to see what their condition is. And if you want a quick and cheap check of the bottom end, use Plastigauge.

If you don't want a street monster, why go with headers? For that matter, with a stock crate motor an aluminum intake might not gain you enough to make it worthwhile.
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson
truckster is online now   Reply With Quote
Old 11-04-2020, 10:37 PM   #3
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 7,624
Re: 350 crate engine questions

I will comment.

Put yourself in their shoes.
I am speaking of the person that would purchase this engine.

1st question; Can I hear this engine run?

2nd question ;
Can I drive the vehicle till the engine is (up) to operating Temperature?

With that being said: What state is the engine in now?
Why Do you think it needs to be rebuilt?

Now: I would try to use this engine to motivate (move the truck around) my project truck.
Then sell it to a person that can see it run.

just my opinion





.
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)

http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is online now   Reply With Quote
Old 11-04-2020, 10:42 PM   #4
Clatterville trolley
Senior Member
 
Clatterville trolley's Avatar
 
Join Date: Apr 2013
Location: Columbia, MO
Posts: 1,922
Re: 350 crate engine questions

Quote:
Originally Posted by Getter-Done View Post
I will comment.

Put yourself in their shoes.
I am speaking of the person that would purchase this engine.

1st question; Can I hear this engine run?

2nd question ;
Can I drive the vehicle till the engine is (up) to operating Temperature?

With that being said: What state is the engine in now?
Why Do you think it needs to be rebuilt?

Now: I would try to use this engine to motivate (move the truck around) my project truck.
Then sell it to a person that can see it run.

just my opinion





.
All really good thoughts to consider. Engine is out of chassis at the moment and chassis is blasted and painted already, so rather not set engine into that to see if it will run. However, I do have a couple of rolling chassis on hand that it could be placed it to get it running to sell. Thanks for your thoughts. Jay
__________________
PayPal 1windyridgeboy@gmail.com
Clatterville trolley is offline   Reply With Quote
Old 11-04-2020, 10:45 PM   #5
Clatterville trolley
Senior Member
 
Clatterville trolley's Avatar
 
Join Date: Apr 2013
Location: Columbia, MO
Posts: 1,922
Re: 350 crate engine questions

Quote:
Originally Posted by truckster View Post
If you have no idea of how many miles it has on it, run a compression and leak-down test. You could also bore scope the cylinders to see what their condition is. And if you want a quick and cheap check of the bottom end, use Plastigauge.

If you don't want a street monster, why go with headers? For that matter, with a stock crate motor an aluminum intake might not gain you enough to make it worthwhile.
My thought on headers was to let the engine breath a little easier and possibly squeeze out a little more mpg's? Not expecting 30 mpg by any stretch of imagination, but would not like to have to tow a gasoline station behind the truck to keep tank full. Lol
__________________
PayPal 1windyridgeboy@gmail.com
Clatterville trolley is offline   Reply With Quote
Old 11-04-2020, 10:50 PM   #6
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: 350 crate engine questions

IMO unless an engine can be started and run to try and make a sale, it is only considered a buildable core. If you get the engine setup and runable, you just might decide to keep it.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-04-2020, 10:54 PM   #7
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 7,624
Re: 350 crate engine questions

Quote:
Originally Posted by Captainfab View Post
IMO unless an engine can be started and run to try and make a sale, it is only considered a buildable core. If you get the engine setup and runable, you just might decide to keep it.
Well said

I vote for this option










.
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)

http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is online now   Reply With Quote
Old 11-04-2020, 11:09 PM   #8
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,723
Re: 350 crate engine questions

Since your linitiall description said.."into his shop and around some" it makes it sound like the motor is still rather fresh. I was actually expecting more of a "starting it up after long term storage thread" here and was surprised when you said you were gonna rebuild it. I'd at least check the slop on the timing chain by turning the balancer back and forth while watching the distributor rotor for movement. If there's not much play, it clearly would be a good sign for following thru with what some of the other guys are saying.
AcampoDave is offline   Reply With Quote
Old 11-05-2020, 05:20 PM   #9
toolboxchev
Registered User
 
Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
Re: 350 crate engine questions

Quote:
Originally Posted by Captainfab View Post
IMO unless an engine can be started and run to try and make a sale, it is only considered a buildable core. If you get the engine setup and runable, you just might decide to keep it.
Add the compression leakdown test for me. There is just too much bs in the world right now for my liking.

But that is just my 2 cents.....
toolboxchev is offline   Reply With Quote
Old 11-05-2020, 08:23 PM   #10
Clatterville trolley
Senior Member
 
Clatterville trolley's Avatar
 
Join Date: Apr 2013
Location: Columbia, MO
Posts: 1,922
Re: 350 crate engine questions

Quote:
Originally Posted by Captainfab View Post
IMO unless an engine can be started and run to try and make a sale, it is only considered a buildable core. If you get the engine setup and runable, you just might decide to keep it.
Very good idea to keep in mind as I move forward with this build. Thanks for your input! Jay
__________________
PayPal 1windyridgeboy@gmail.com
Clatterville trolley is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com