The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-14-2018, 01:40 PM   #1
Spurgin1
Registered User
 
Join Date: Jul 2018
Location: Rocheport Missouri
Posts: 6
292 Engine mount

Are the engine mounts the same on 292 as 250. I know the passenger frame mount is different. Thanks
Spurgin1 is offline   Reply With Quote
Old 07-15-2018, 12:25 AM   #2
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 21,477
Re: 292 Engine mount

The engine mounts themselves are the same '63-'72 for the 230,250, 292, 283, 307, 327 and 350's
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 07-15-2018, 11:22 AM   #3
Spurgin1
Registered User
 
Join Date: Jul 2018
Location: Rocheport Missouri
Posts: 6
Quote:
Originally Posted by Captainfab View Post
The engine mounts themselves are the same '63-'72 for the 230,250, 292, 283, 307, 327 and 350's
Am I missing spacers or something? It likes about an inch being long enough to set on the perch.
Posted via Mobile Device
Spurgin1 is offline   Reply With Quote
Old 07-15-2018, 02:07 PM   #4
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,403
Re: 292 Engine mount

Quote:
Originally Posted by Spurgin1 View Post
Am I missing spacers or something? It likes about an inch being long enough to set on the perch.
Posted via Mobile Device
are you sure it is a 292??
ron
padresag is offline   Reply With Quote
Old 07-15-2018, 03:36 PM   #5
Spurgin1
Registered User
 
Join Date: Jul 2018
Location: Rocheport Missouri
Posts: 6
Quote:
Originally Posted by padresag View Post
are you sure it is a 292??
ron
Positive
Posted via Mobile Device
Spurgin1 is offline   Reply With Quote
Old 07-15-2018, 05:55 PM   #6
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,403
Re: 292 Engine mount

show a picture of the mounting in question. it is either one way or the other.
ron
padresag is offline   Reply With Quote
Old 07-16-2018, 12:07 AM   #7
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 21,477
Re: 292 Engine mount

Do you have the brackets between the block and the engine mounts?
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 07-17-2018, 07:35 PM   #8
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,403
Re: 292 Engine mount

Quote:
Originally Posted by Captainfab View Post
Do you have the brackets between the block and the engine mounts?
it sounds like someone using a 292 perch on a 230-250 eng. there are only 2 different perches in 2 wd and 2 different engine applications. if it don't match up with one it must be the other. there were no other options. he may be also trying to fit a gmc perch in there but do not know what that outcome would be but doubt that it would work.
ron
padresag is offline   Reply With Quote
Old 07-18-2018, 09:44 PM   #9
dmulally
Registered User
 
Join Date: Feb 2018
Location: Shannon, New Zealand
Posts: 8
Re: 292 Engine mount

I had dramas with mine as somebody had butchered some BB mounts to fit the brackets for a 250. So when I put a V8 in it was about an inch out.

I got rid of it all and went for a tubular mount that moved the engine forward for the MSD cap.
dmulally is offline   Reply With Quote
Old 07-18-2018, 09:56 PM   #10
padresag
Registered User
 
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,403
Re: 292 Engine mount

Quote:
Originally Posted by dmulally View Post
I had dramas with mine as somebody had butchered some BB mounts to fit the brackets for a 250. So when I put a V8 in it was about an inch out.

I got rid of it all and went for a tubular mount that moved the engine forward for the MSD cap.
but we so far can only go by the info that has been given and it is skimpy. n o one has mentioned anything other than a stock applications so far. he has been asked on 2 forums for pictures and hasn't done so yet. if pictures are given then the problem may be solved
ron
padresag is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com