Got the H2 Rims on my '86 C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cal30_sniper · 03-19-2012, 02:54 PM

Got the H2 rims put on my C20, along with the 255/75/17s off of my old burban. Fit like a glove (still hubcentric, and perfect backspacing).

Some before and after shots:

What do y'all think?

-cal30sniper

Pop's C-10 · 03-19-2012, 03:00 PM

nice

1Bad65GMC · 03-19-2012, 05:41 PM

Cal30 Sniper, what lug nuts did you use for this? I also picked up some H2 wheels but the ones I have found so far I don't want to run. They seem too skinny and not enough contact area.

cal30_sniper · 03-19-2012, 06:10 PM

Quote:

Originally Posted by 1Bad65GMC

Cal30 Sniper, what lug nuts did you use for this? I also picked up some H2 wheels but the ones I have found so far I don't want to run. They seem too skinny and not enough contact area.

I just used the factory lug nuts. The H2 rims have a really deep conical dish for the lugs, but they seemed to snug down just fine. Seeing as how they're hubcentric, I wasn't too worried with the lug to wheel interface being perfect. I'll see how they do when I re-torque them in a few hundred.

-cal30sniper

Hoods69BadBowTie · 03-26-2012, 11:37 PM

Nice looks pretty good with the new rims. Now go out and have some fun cruising it around

manimal · 03-27-2012, 10:58 AM

Much better! Looks great!

justcuz · 03-27-2012, 09:13 PM

Find some Chevy centers. You can get SAE lug nuts with the threads on them for the center caps most everywhere, e-bay, tire stores, etc.

cal30_sniper · 03-27-2012, 09:16 PM

I've been looking around for the centers already. I just dropped all of my available cash on a Gear Vendors for it though. That's my next project for it.

Mr. 250r · 04-01-2012, 11:47 AM

I still can't decide if I want to use h2 wheels this truck pulls them off but on lifted trucks it just seems weird for some reason but free wheels is nothing I pass up lol nice look hopefully mine won't look weird with 37s
Posted via Mobile Device

manimal · 04-13-2012, 11:52 AM

I have a set of 07-09 GMC caps!

cal30_sniper · 06-13-2012, 01:29 AM

Finally found some of the 90s style chevy center caps. I'll get them on as soon as the lugs come in.

-cal30sniper
Posted via Mobile Device

SBTork · 06-16-2012, 01:37 PM

very cool, can't wait to see them with the new caps on there.

cal30_sniper · 06-16-2012, 11:02 PM

Well, the caps came in today, and they're about 1/16"-1/32" too big in outside diameter. I'm kind of frustrated, I thought they would fit right in. Anyways, looks like I have another date with the dremel tool this week.

-cal30sniper

**texassquarebodies** · 06-24-2012, 12:34 AM

Looks really tough on the burb. I put hummer wheels on my 87' truck with stock center caps. Don't look bad. I only paid $150 for the set of wheels. Its just my pull truck.

cal30_sniper · 06-26-2012, 11:11 PM

Tony, that truck looks pretty sweet. I like the look of the hummer caps on that thing, all business.

Well, after a couple of hours of careful trimming and grinding, I finally got all four of the center caps to fit right. I took a gamble ordering these used off of fleaBay, not knowing whether they originally came off of steel or aluminum wheels. Turns out they were off of steel wheels, and I had to take quite a bit off the outside diameter to get them to fit inside the space on the Hummer wheel. Nothing a little angle grinding couldn't take care of though.

Here's some quick pictures of the finished product that I took:

-cal30sniper

**texassquarebodies** · 06-27-2012, 01:52 AM

Thats on the money!!! Those wheels and tires make that burb. Center caps look great. Did you buy conversion lug nuts? I just got another set of Hummer wheels on Cl for $150. Puttin them on my crew in my avatar which is the same color as your burb.

cal30_sniper · 06-27-2012, 10:00 AM

Quote:

Originally Posted by texassquarebodies

Thats on the money!!! Those wheels and tires make that burb. Center caps look great. Did you buy conversion lug nuts? I just got another set of Hummer wheels on Cl for $150. Puttin them on my crew in my avatar which is the same color as your burb.

That's going to look great, post some pics up when you're done. Also, if you want some tires for the hummer rims, just look on craigslist for Jeep 17" tires. 255/75/17 is the factory size for a lot of the new wranglers, and there are low-mile takeoffs floating around everywhere.

The lugnuts are 9/16" thread with an external thread. They are actually for Alcoa wheels, or at least that's what the guy I bought them from said. I paid $20 for all 32.

-cal30sniper

**texassquarebodies** · 07-01-2012, 01:06 PM

I did look on CL for the jeep tires. I can get them pretty cheap. Ty for the tip

WarBeard · 07-01-2012, 08:05 PM

Quote:

Originally Posted by Mr. 250r

I still can't decide if I want to use h2 wheels this truck pulls them off but on lifted trucks it just seems weird for some reason but free wheels is nothing I pass up lol nice look hopefully mine won't look weird with 37s
Posted via Mobile Device

Doesn't look weird to me. 6" lift with 37's

03-19-2012, 02:54 PM	#1
cal30_sniper Registered User Join Date: Jan 2011 Location: Coastal NC Posts: 276	Got the H2 Rims on my '86 C20 Got the H2 rims put on my C20, along with the 255/75/17s off of my old burban. Fit like a glove (still hubcentric, and perfect backspacing). Some before and after shots: What do y'all think? -cal30sniper __________________ 86 Chevrolet K20/30 Suburban - 8.1/NV4500/NP205/Dana 60/14 bolt FF, build in progress 73 Formula - 400/Doug Nash 4+1, resto on hold 86 Chevrolet K30 3+3 - 350/TH400/NP241, Air Force/Forest Service Rescue Truck, for sale 01 Ram 2500 - 5.9L Magnum, daily driver 91 BMW 325i - Chumpcar series racecar

03-19-2012, 03:00 PM	#2
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Got the H2 Rims on my '86 C20 nice __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

03-19-2012, 05:41 PM	#3
1Bad65GMC Registered User Join Date: Oct 2011 Location: Sacramento, Calif Posts: 70	Re: Got the H2 Rims on my '86 C20 Cal30 Sniper, what lug nuts did you use for this? I also picked up some H2 wheels but the ones I have found so far I don't want to run. They seem too skinny and not enough contact area. __________________ 1998 GMC Suburban 2500 454 4X4 1984 GMC Jimmy - 3/4 ton axles, 5.7TBI 1990 GMC Suburban (Parts Donor) scrapped 1965 Buick Riviera - (Sold) 1999 Mercury Grand Marquis 1965 GMC SBSS (Sold)

03-26-2012, 11:37 PM	#5
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Got the H2 Rims on my '86 C20 Nice looks pretty good with the new rims. Now go out and have some fun cruising it around __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

03-27-2012, 10:58 AM	#6
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Got the H2 Rims on my '86 C20 Much better! Looks great! __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

03-27-2012, 09:13 PM	#7
justcuz Registered User Join Date: May 2008 Location: Alta Loma, Ca. Posts: 930	Re: Got the H2 Rims on my '86 C20 Find some Chevy centers. You can get SAE lug nuts with the threads on them for the center caps most everywhere, e-bay, tire stores, etc.

03-27-2012, 09:16 PM	#8
cal30_sniper Registered User Join Date: Jan 2011 Location: Coastal NC Posts: 276	Re: Got the H2 Rims on my '86 C20 I've been looking around for the centers already. I just dropped all of my available cash on a Gear Vendors for it though. That's my next project for it. __________________ 86 Chevrolet K20/30 Suburban - 8.1/NV4500/NP205/Dana 60/14 bolt FF, build in progress 73 Formula - 400/Doug Nash 4+1, resto on hold 86 Chevrolet K30 3+3 - 350/TH400/NP241, Air Force/Forest Service Rescue Truck, for sale 01 Ram 2500 - 5.9L Magnum, daily driver 91 BMW 325i - Chumpcar series racecar

04-01-2012, 11:47 AM	#9
Mr. 250r Registered User Join Date: Dec 2010 Location: freeburg, illinois Posts: 885	Re: Got the H2 Rims on my '86 C20 I still can't decide if I want to use h2 wheels this truck pulls them off but on lifted trucks it just seems weird for some reason but free wheels is nothing I pass up lol nice look hopefully mine won't look weird with 37s Posted via Mobile Device __________________ 1987 Chevy V30 - http://67-72chevytrucks.com/vboard/s...d.php?t=573854 1988 IROC-Z Camaro - 305/T5 T-Top 1989 GMC V35 - Marbolo Express http://67-72chevytrucks.com/vboard/s...d.php?t=596850 1991 V2500 Suburban Silverado - Sold 1991 V2500 Suburban Scottsdale - Big Nasty http://67-72chevytrucks.com/vboard/s...d.php?t=497423 2001 Ram 3500 5.9 H.O NV56 EC DRW - Sold 2003 1500 Silverado 2004 Ram 3500 5.9 H.O NV56 CC DRW - Sold 2005 Silverado 2500HD 6.6/ZF6 CC LWB

04-13-2012, 11:52 AM	#10
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: Got the H2 Rims on my '86 C20 I have a set of 07-09 GMC caps! __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

06-13-2012, 01:29 AM	#11
cal30_sniper Registered User Join Date: Jan 2011 Location: Coastal NC Posts: 276	Re: Got the H2 Rims on my '86 C20 Finally found some of the 90s style chevy center caps. I'll get them on as soon as the lugs come in. -cal30sniper Posted via Mobile Device __________________ 86 Chevrolet K20/30 Suburban - 8.1/NV4500/NP205/Dana 60/14 bolt FF, build in progress 73 Formula - 400/Doug Nash 4+1, resto on hold 86 Chevrolet K30 3+3 - 350/TH400/NP241, Air Force/Forest Service Rescue Truck, for sale 01 Ram 2500 - 5.9L Magnum, daily driver 91 BMW 325i - Chumpcar series racecar

06-16-2012, 01:37 PM	#12
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,856	Re: Got the H2 Rims on my '86 C20 very cool, can't wait to see them with the new caps on there. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

06-16-2012, 11:02 PM	#13
cal30_sniper Registered User Join Date: Jan 2011 Location: Coastal NC Posts: 276	Re: Got the H2 Rims on my '86 C20 Well, the caps came in today, and they're about 1/16"-1/32" too big in outside diameter. I'm kind of frustrated, I thought they would fit right in. Anyways, looks like I have another date with the dremel tool this week. -cal30sniper __________________ 86 Chevrolet K20/30 Suburban - 8.1/NV4500/NP205/Dana 60/14 bolt FF, build in progress 73 Formula - 400/Doug Nash 4+1, resto on hold 86 Chevrolet K30 3+3 - 350/TH400/NP241, Air Force/Forest Service Rescue Truck, for sale 01 Ram 2500 - 5.9L Magnum, daily driver 91 BMW 325i - Chumpcar series racecar

06-24-2012, 12:34 AM	#14
texassquarebodies Truck Nut Join Date: Jun 2007 Location: Wills Point, Texas Posts: 407	Re: Got the H2 Rims on my '86 C20 Looks really tough on the burb. I put hummer wheels on my 87' truck with stock center caps. Don't look bad. I only paid $150 for the set of wheels. Its just my pull truck. Attached Images __________________ Tony Kee Texas Square Bodies

06-26-2012, 11:11 PM	#15
cal30_sniper Registered User Join Date: Jan 2011 Location: Coastal NC Posts: 276	Re: Got the H2 Rims on my '86 C20 Tony, that truck looks pretty sweet. I like the look of the hummer caps on that thing, all business. Well, after a couple of hours of careful trimming and grinding, I finally got all four of the center caps to fit right. I took a gamble ordering these used off of fleaBay, not knowing whether they originally came off of steel or aluminum wheels. Turns out they were off of steel wheels, and I had to take quite a bit off the outside diameter to get them to fit inside the space on the Hummer wheel. Nothing a little angle grinding couldn't take care of though. Here's some quick pictures of the finished product that I took: -cal30sniper __________________ 86 Chevrolet K20/30 Suburban - 8.1/NV4500/NP205/Dana 60/14 bolt FF, build in progress 73 Formula - 400/Doug Nash 4+1, resto on hold 86 Chevrolet K30 3+3 - 350/TH400/NP241, Air Force/Forest Service Rescue Truck, for sale 01 Ram 2500 - 5.9L Magnum, daily driver 91 BMW 325i - Chumpcar series racecar

06-27-2012, 01:52 AM	#16
texassquarebodies Truck Nut Join Date: Jun 2007 Location: Wills Point, Texas Posts: 407	Re: Got the H2 Rims on my '86 C20 Thats on the money!!! Those wheels and tires make that burb. Center caps look great. Did you buy conversion lug nuts? I just got another set of Hummer wheels on Cl for $150. Puttin them on my crew in my avatar which is the same color as your burb. __________________ Tony Kee Texas Square Bodies



Register or Log In To remove these advertisements.

07-01-2012, 01:06 PM	#18
texassquarebodies Truck Nut Join Date: Jun 2007 Location: Wills Point, Texas Posts: 407	Re: Got the H2 Rims on my '86 C20 I did look on CL for the jeep tires. I can get them pretty cheap. Ty for the tip __________________ Tony Kee Texas Square Bodies

Register or Log In To remove these advertisements.