OK 1962 GMC 4x4 parts truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oklahomaduner · 07-22-2010, 11:57 PM

$750 or best offer!!!! This truck must go so shoot me an offer!!!!
will make package deal with the suburban
http://67-72chevytrucks.com/vboard/s...d.php?t=413181

1962 GMC 4x4 truck

no motor
has the tranny, transfer case, both axles and the suspension
cab is dented on the drivers side
no hood
no grille
interior is almost all there
Let me know if you want more pics!!!

**nbrfd007** · 07-23-2010, 04:56 PM

1/2 or 3/4 ton? Title? Is it possible to get inside pics? Has the dash been cut up? Cab still solid?
Thanks,
Tim

oklahomaduner · 07-23-2010, 05:05 PM

3/4 ton I believe. The cab has been hit on the back drivers side and it bent the frame behind the cab mounts. I'm still trying to ge ahold of the title and I will try to take some more pics of the interior and damage this weekend.

duallyjams · 11-21-2010, 08:02 PM

Would you be willing to sell parts off of this ?

oklahomaduner · 11-21-2010, 08:24 PM

I'd really like to sell it complete. But what parts are you interested in?
Posted via Mobile Device

75gmc454 · 11-21-2010, 09:35 PM

I thought all of these trucks had divorced transfer cases.

I need an original transfercase shifter handle and bracket that bolts to the transmission for a 4 speed. But I'm not sure if this truck has this if the trans/t-case has been swapped.

I don't want to start something though if you don't want to part it out.

oklahomaduner · 11-21-2010, 10:14 PM

I'm sorry, but for something small like that I probably wouldn't, atleast not at this point. But if you were interested in the whole truck I can go take a look and see if it has it.
Posted via Mobile Device

75gmc454 · 11-21-2010, 11:48 PM

Thats fine. If I was closer I would be interested in the truck. Just keep us posted on what you decide to do. --Clint

oklahomaduner · 11-22-2010, 01:58 AM

I certainly will. Thanks for looking! But sorry I couldn't help you at this time.
-Austin
Posted via Mobile Device

duallyjams · 11-23-2010, 09:00 AM

If you change your mind on parting it out I would be interested in the factory rear blocks and if it has the factory 17 inch wheels.

oklahomaduner · 12-08-2010, 12:18 AM

500 bucks guys... I need it gone

duallyjams · 12-11-2010, 02:22 PM

pm sent

oklahomaduner · 12-11-2010, 07:04 PM

Replied, Thanks!
Posted via Mobile Device

oklahomaduner · 12-29-2010, 03:08 AM

Bump

chrisgbrown · 04-10-2011, 12:22 PM

If you could let go of the front drive shaft I would be very interested. Maybe a few other parts. I cant take the whole truck sorry. Thanks.

**nbrfd007** · 04-10-2011, 05:35 PM

Where you able to find the title? Is it possible to get a picture of the frame damage? See if I can have it straighten.
Thanks,
Tim

oklahomaduner · 04-14-2011, 12:05 AM

As of now, the title is lost. the previous owner said there is a title but he hasnt found it yet. As far as the frame damage goes, I can get you pictures but some one has redone a few of the rear brackets to compensate for the bend.

oklahomaduner · 04-14-2011, 12:08 AM

Chris, pm sent

RockTonka · 05-10-2011, 06:38 PM

RockTonka · 08-20-2011, 05:18 PM

Sold to nbrfd007!!

Good to meet you today Tim!!

tyree71 · 06-27-2012, 02:46 PM

What about the suburban you are trying to sell?

tyree71 · 06-27-2012, 03:02 PM

The one w/the truck u sold?

RockTonka · 06-28-2012, 02:09 AM

It has also been sold.

07-22-2010, 11:57 PM	#1
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	1962 GMC 4x4 parts truck $750 or best offer!!!! This truck must go so shoot me an offer!!!! will make package deal with the suburban http://67-72chevytrucks.com/vboard/s...d.php?t=413181 1962 GMC 4x4 truck no motor has the tranny, transfer case, both axles and the suspension cab is dented on the drivers side no hood no grille interior is almost all there Let me know if you want more pics!!! __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

07-23-2010, 04:56 PM	#2
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: 1962 GMC 4x4 parts truck 1/2 or 3/4 ton? Title? Is it possible to get inside pics? Has the dash been cut up? Cab still solid? Thanks, Tim

07-23-2010, 05:05 PM	#3
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: 1962 GMC 4x4 parts truck 3/4 ton I believe. The cab has been hit on the back drivers side and it bent the frame behind the cab mounts. I'm still trying to ge ahold of the title and I will try to take some more pics of the interior and damage this weekend. __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

11-21-2010, 08:02 PM	#4
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1962 GMC 4x4 parts truck Would you be willing to sell parts off of this ? __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

11-21-2010, 08:24 PM	#5
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: 1962 GMC 4x4 parts truck I'd really like to sell it complete. But what parts are you interested in? Posted via Mobile Device __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

11-21-2010, 09:35 PM	#6
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 1962 GMC 4x4 parts truck I thought all of these trucks had divorced transfer cases. I need an original transfercase shifter handle and bracket that bolts to the transmission for a 4 speed. But I'm not sure if this truck has this if the trans/t-case has been swapped. I don't want to start something though if you don't want to part it out.

11-21-2010, 10:14 PM	#7
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: 1962 GMC 4x4 parts truck I'm sorry, but for something small like that I probably wouldn't, atleast not at this point. But if you were interested in the whole truck I can go take a look and see if it has it. Posted via Mobile Device __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

11-21-2010, 11:48 PM	#8
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: 1962 GMC 4x4 parts truck Thats fine. If I was closer I would be interested in the truck. Just keep us posted on what you decide to do. --Clint Last edited by 75gmc454; 11-21-2010 at 11:48 PM.

11-22-2010, 01:58 AM	#9
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: 1962 GMC 4x4 parts truck I certainly will. Thanks for looking! But sorry I couldn't help you at this time. -Austin Posted via Mobile Device __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck Last edited by oklahomaduner; 11-22-2010 at 01:59 AM.

11-23-2010, 09:00 AM	#10
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1962 GMC 4x4 parts truck If you change your mind on parting it out I would be interested in the factory rear blocks and if it has the factory 17 inch wheels. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-08-2010, 12:18 AM	#11
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: 1962 GMC 4x4 parts truck 500 bucks guys... I need it gone __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

12-11-2010, 02:22 PM	#12
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1962 GMC 4x4 parts truck pm sent __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-11-2010, 07:04 PM	#13
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: 1962 GMC 4x4 parts truck Replied, Thanks! Posted via Mobile Device __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

12-29-2010, 03:08 AM	#14
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: 1962 GMC 4x4 parts truck Bump __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

04-10-2011, 12:22 PM	#15
chrisgbrown Registered User Join Date: Apr 2011 Location: Sierra Vista, AZ Posts: 1	Re: 1962 GMC 4x4 parts truck If you could let go of the front drive shaft I would be very interested. Maybe a few other parts. I cant take the whole truck sorry. Thanks.



Register or Log In To remove these advertisements.

04-10-2011, 05:35 PM	#16
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	Re: 1962 GMC 4x4 parts truck Where you able to find the title? Is it possible to get a picture of the frame damage? See if I can have it straighten. Thanks, Tim

04-14-2011, 12:05 AM	#17
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: 1962 GMC 4x4 parts truck As of now, the title is lost. the previous owner said there is a title but he hasnt found it yet. As far as the frame damage goes, I can get you pictures but some one has redone a few of the rear brackets to compensate for the bend. __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

04-14-2011, 12:08 AM	#18
oklahomaduner Registered User Join Date: Dec 2008 Location: Oklahoma City Posts: 447	Re: 1962 GMC 4x4 parts truck Chris, pm sent __________________ 1966 GMC Extended cab 1 1/4 ton 4x4 My build thread 1958 Chevy 1 ton dually flatbed My Dad's build thread 1966 GMC Custom Trim Big Back Window W/351e My Time-Killing Project Truck 1966 (Not So) All Original Chevy Custom Trim Suburban My Dad's Time-Killing Project Truck

05-10-2011, 06:38 PM	#19
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 1962 GMC 4x4 parts truck __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

08-20-2011, 05:18 PM	#20
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 1962 GMC 4x4 parts truck Sold to nbrfd007!! Good to meet you today Tim!! __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

06-27-2012, 02:46 PM	#21
tyree71 Registered User Join Date: May 2012 Location: Murfreesboro, Tennessee Posts: 2	Re: 1962 GMC 4x4 parts truck What about the suburban you are trying to sell?

06-27-2012, 03:02 PM	#22
tyree71 Registered User Join Date: May 2012 Location: Murfreesboro, Tennessee Posts: 2	Re: 1962 GMC 4x4 parts truck The one w/the truck u sold?

06-28-2012, 02:09 AM	#23
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 1962 GMC 4x4 parts truck It has also been sold. __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

Register or Log In To remove these advertisements.