My 50 roadster pickup build

[flatbed51]

I was looking at *****in products and noticed they have two floor kits, one stock and the other for their firewall kit. Which one did you use? That dash is exactly what I have wanted to install in my truck and had almost given up on the idea until I saw yours. I've got to have one. Don

[Bentblazer]

Nice build: need any rain?

[oldman3]

Originally Posted by Bentblazer

Nice build: need any rain?

What's rain????? Oh, that wet stuff, no thanks.

[oldman3]

Originally Posted by flatbed51

I was looking at *****in products and noticed they have two floor kits, one stock and the other for their firewall kit. Which one did you use? That dash is exactly what I have wanted to install in my truck and had almost given up on the idea until I saw yours. I've got to have one. Don

Don, I used the one for the stock firewall. Part #751002 (at that time). The dash part #742120 and the lower panel part #371041. Bitc--n was going to make one for the 47-53 pickups, but I never saw it. I just decided to make the one for car work. If I can help with more info, let me know. Jim

[flatbed51]

Thanks Jim. Look forward to seeing more updates.

[oldman3]

Well, since our Easter plans have changed, it will give me time to post some more pics. I had ordered a headlight kit from Hagan, it arrived and I decided to install it right away.

I cut the original lip down it the fender, as per instructions.

[oldman3]

Made sure to have the correct bucket for each side.

[oldman3]

Not a very good picture, but all welded in and the coverput in place. Outer part of bucket lined up real nice with the fender. Real simply install. A little filler work and it will be good to go.

[oldman3]

Welded up the center of hood, and all the old holes for emblems.