C-Notch kit in leaf spring truck with flip kit setting axle back one inch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevykevy · 11-03-2018, 05:14 PM

I’m using a DJM axle flip kit on my 1968 GMC. Want to do a c notch as well. The kit sets the axle back 1 inch. Will a pre made c notch kit like CPP etc. fit? Wondering if the offset to the rear not allow the axle tube to line up with the kit? The kits are shaped to match the wave of sorts in the frame rails probably not allowing for front to rear adjustments. Anyone used one?
Rhanks

dfosh · 11-04-2018, 03:05 PM

I used the exact kit you have in a 68 GMC . I installed the flip kit, put the axel in set the truck down then lined the notch up above axel. I made a cardboard template to trace the notch and then cut the frame It fit the frame just fine. Sorry I don't have pic.

PepperTreeGarage · 11-04-2018, 04:07 PM

Mine is also the CPP C-Notch but in a '72 C20 with leaf springs. Just install it as per the instructions. The coil spring trailing arm trucks' axel also moves back as the truck is lowered. I lowered my truck to get the stance right and marked axle centerline. Then mocked up where the C-Notch would be installed. As you can see in the pics, it falls right on centerline. I also made reinforcement plates for both the inside and outside of the main c-notch bracket. There is also the bolt that holds the upper shock mount that you will have to layout and drill. Take your time and double check all measurements and you'll be fine. Support your truck both in front of and behind the axle.

chevykevy · 11-04-2018, 07:26 PM

Great news, thanks dfosh and Pepper Tree Garage
Awsesome pictures ptg

PepperTreeGarage · 11-05-2018, 01:05 AM

Quote:

Originally Posted by chevykevy

Great news, thanks dfosh and Pepper Tree Garage
Awsesome pictures ptg

Glad it helps

PepperTreeGarage · 11-12-2018, 11:39 PM

Thought you'd like to see the finished product. We'll do a little prep and then do the MIG work.

**Speedracer39** · 11-13-2018, 03:18 PM

Looks like mine— I also chose to weld after bolting it together.

PepperTreeGarage · 11-13-2018, 04:37 PM

Quote:

Originally Posted by Speedracer39

Looks like mine— I also chose to weld after bolting it together.

Nice! I'm also adding helper bags for loads and towing.

54blackhornet · 11-13-2018, 05:13 PM

I would like to applaud your craftsmanship guy’s ! I have a lwb 71 GMC I would like to drop but just don’t think I have the skills to do this kind of cutting and welding....

PepperTreeGarage · 11-14-2018, 11:12 PM

Quote:

Originally Posted by 54blackhornet

I would like to applaud your craftsmanship guy’s ! I have a lwb 71 GMC I would like to drop but just don’t think I have the skills to do this kind of cutting and welding....

You don't have to do the welding. Fine with just the bolts.

bobshotrodblazer · 07-31-2019, 07:03 PM

Thanks for the great pictures. I’m working on my 71 c10 now with leaf spring setup as well.

11-03-2018, 05:14 PM	#1
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	C-Notch kit in leaf spring truck with flip kit setting axle back one inch? I’m using a DJM axle flip kit on my 1968 GMC. Want to do a c notch as well. The kit sets the axle back 1 inch. Will a pre made c notch kit like CPP etc. fit? Wondering if the offset to the rear not allow the axle tube to line up with the kit? The kits are shaped to match the wave of sorts in the frame rails probably not allowing for front to rear adjustments. Anyone used one? Rhanks

11-04-2018, 03:05 PM	#2
dfosh Registered User Join Date: Oct 2007 Location: greeneville tn Posts: 237	Re: C-Notch kit in leaf spring truck with flip kit setting axle back one inch? I used the exact kit you have in a 68 GMC . I installed the flip kit, put the axel in set the truck down then lined the notch up above axel. I made a cardboard template to trace the notch and then cut the frame It fit the frame just fine. Sorry I don't have pic.

11-04-2018, 04:07 PM	#3
PepperTreeGarage Registered User Join Date: Jan 2014 Location: SoCal Posts: 281	Re: C-Notch kit in leaf spring truck with flip kit setting axle back one inch? Mine is also the CPP C-Notch but in a '72 C20 with leaf springs. Just install it as per the instructions. The coil spring trailing arm trucks' axel also moves back as the truck is lowered. I lowered my truck to get the stance right and marked axle centerline. Then mocked up where the C-Notch would be installed. As you can see in the pics, it falls right on centerline. I also made reinforcement plates for both the inside and outside of the main c-notch bracket. There is also the bolt that holds the upper shock mount that you will have to layout and drill. Take your time and double check all measurements and you'll be fine. Support your truck both in front of and behind the axle. Attached Images Last edited by PepperTreeGarage; 11-05-2018 at 01:02 AM.

11-04-2018, 07:26 PM	#4
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	Re: C-Notch kit in leaf spring truck with flip kit setting axle back one inch? Great news, thanks dfosh and Pepper Tree Garage Awsesome pictures ptg

11-12-2018, 11:39 PM	#6
PepperTreeGarage Registered User Join Date: Jan 2014 Location: SoCal Posts: 281	Re: C-Notch kit in leaf spring truck with flip kit setting axle back one inch? Thought you'd like to see the finished product. We'll do a little prep and then do the MIG work. Attached Images

11-13-2018, 03:18 PM	#7
Speedracer39 Senior Member Join Date: Sep 2016 Location: Omaha Nebraska Posts: 589	Re: C-Notch kit in leaf spring truck with flip kit setting axle back one inch? Looks like mine— I also chose to weld after bolting it together. Attached Images

11-13-2018, 05:13 PM	#9
54blackhornet Registered User Join Date: Jul 2008 Location: Eastern Oregon Posts: 2,258	Re: C-Notch kit in leaf spring truck with flip kit setting axle back one inch? I would like to applaud your craftsmanship guy’s ! I have a lwb 71 GMC I would like to drop but just don’t think I have the skills to do this kind of cutting and welding.... __________________ 71 C-20 07 Magnum RT AWD

07-31-2019, 07:03 PM	#11
bobshotrodblazer BigBlockBobby Join Date: Mar 2004 Location: Lake Worth, Florida Posts: 740	Re: C-Notch kit in leaf spring truck with flip kit setting axle back one inch? Thanks for the great pictures. I’m working on my 71 c10 now with leaf spring setup as well. Attached Images __________________ Bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.