NM Left over 72 Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AASmedic · 02-23-2017, 05:55 PM

1. Original 72 K20 engine wiring harness. It is all intact. The yellow coil wire was converted to adapt to an HEI but can easily be made to go back to a "points" connection. This is for a V8. $40 shipped. I also have a new plastic wire channel for this for an additional $5.

2. Original under dash wiring harness. This is also completely intact. This is for a truck with A/C and NO anti-dieseling relay.
$40 shipped.

3. Original jack hold down bracket/spring and bolts. Tool hold down spring included. $15 shipped. SOLD

4. Steering wheel with cap and hardware. I believe it is for a 79-81 truck. It was on my K20 when I bought it. Fit just fine. $55 shipped. SOLD

First "I'll take it" gets it.

Thanks for looking

AASmedic · 02-23-2017, 11:14 PM

Open to offers

**71CHEVYSHORTBED402** · 02-24-2017, 02:10 AM

If the bolt used to mount the spring to the door jam will clean up like new, how about $12 shipped?

I figure it's the same bolt used for the end-bed tire carrier, and can use one............Thank you.

AASmedic · 02-24-2017, 02:53 AM

Quote:

Originally Posted by 71CHEVYSHORTBED402

If the bolt used to mount the spring to the door jam will clean up like new, how about $12 shipped?

I figure it's the same bolt used for the end-bed tire carrier, and can use one............Thank you.

I will do $12. I'm not sure what you mean by clean up like new. Its in pretty good shape. No rust. I can try to buff off the paint if that's what you are looking for.

**71CHEVYSHORTBED402** · 02-24-2017, 12:58 PM

Quote:

Originally Posted by AASmedic

I will do $12. I'm not sure what you mean by clean up like new. Its in pretty good shape. No rust. I can try to buff off the paint if that's what you are looking for.

No reason to do that thanks. If it's not stripped, pitted, or rusted out that works.

AASmedic · 02-26-2017, 02:48 AM

Jack hold down sold to Tony.

AASmedic · 02-26-2017, 02:50 AM

Ttt

AASmedic · 02-26-2017, 12:17 PM

No reasonable offer refused for the weekend.

nawlinjoe · 02-26-2017, 08:13 PM

Quote:

Originally Posted by AASmedic

No reasonable offer refused for the weekend.

Do you happened to have a headlight wiring harness?

AASmedic · 02-26-2017, 08:16 PM

Quote:

Originally Posted by nawlinjoe

Do you happened to have a headlight wiring harness?

No. No headlight harness. Sorry

AASmedic · 02-27-2017, 07:28 PM

Ttt

AASmedic · 03-03-2017, 07:30 AM

Bump for the weekend

fatbass · 03-03-2017, 10:24 AM

I'll give $25 for the steering wheel.

AASmedic · 03-03-2017, 03:40 PM

Quote:

Originally Posted by fatbass

I'll give $25 for the steering wheel.

I will do $25 if you pay shipping. If that works for you, I will get you a quote, just give me your zip code.

fatbass · 03-03-2017, 10:00 PM

PM sent.

fatbass · 03-04-2017, 01:40 PM

Payment sent. Thanks!

Will I need any adapters or will this work with my stock '71 non-tilt column and horn button? I can fab but I'd prefer not to.
Jim

AASmedic · 03-04-2017, 10:43 PM

THis should fit right on without adapters. It was on my stock 72 column.

AASmedic · 03-04-2017, 10:44 PM

Ttt for the weekend

AASmedic · 03-22-2017, 11:38 AM

Ttt

AASmedic · 09-01-2017, 01:02 AM

Ttt for the weekend

crossjo · 09-01-2017, 04:36 PM

What's the best you would do on both wiring harness'. I don't really need them but put them up in case one day. Thanks!

AASmedic · 09-03-2017, 10:40 AM

Ij will do $60 for both if that works for you.

AASmedic · 09-09-2017, 12:50 AM

Ttt for the weekend. I'm open to offers.

02-23-2017, 05:55 PM	#1
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Left over 72 Parts 1. Original 72 K20 engine wiring harness. It is all intact. The yellow coil wire was converted to adapt to an HEI but can easily be made to go back to a "points" connection. This is for a V8. $40 shipped. I also have a new plastic wire channel for this for an additional $5. 2. Original under dash wiring harness. This is also completely intact. This is for a truck with A/C and NO anti-dieseling relay. $40 shipped. 3. Original jack hold down bracket/spring and bolts. Tool hold down spring included. $15 shipped. SOLD 4. Steering wheel with cap and hardware. I believe it is for a 79-81 truck. It was on my K20 when I bought it. Fit just fine. $55 shipped. SOLD First "I'll take it" gets it. Thanks for looking Attached Images __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455 Last edited by AASmedic; 09-01-2017 at 01:04 AM. Reason: Update info

02-23-2017, 11:14 PM	#2
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Open to offers __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

02-24-2017, 02:10 AM	#3
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,126	Re: Left over 72 Parts If the bolt used to mount the spring to the door jam will clean up like new, how about $12 shipped? I figure it's the same bolt used for the end-bed tire carrier, and can use one............Thank you. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring it from ground up. With assys, the guide accts for 1000s details such as OEM identifications& part numbers, written in short order. 700+ images include assm, illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

02-26-2017, 02:48 AM	#6
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Jack hold down sold to Tony. __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

02-26-2017, 02:50 AM	#7
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Ttt __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

02-26-2017, 12:17 PM	#8
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts No reasonable offer refused for the weekend. __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

02-27-2017, 07:28 PM	#11
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Ttt __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

03-03-2017, 07:30 AM	#12
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Bump for the weekend __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

03-03-2017, 10:24 AM	#13
fatbass Registered User Join Date: May 2012 Location: South Ogden, Utah Posts: 170	Re: Left over 72 Parts I'll give $25 for the steering wheel.

03-03-2017, 10:00 PM	#15
fatbass Registered User Join Date: May 2012 Location: South Ogden, Utah Posts: 170	Re: Left over 72 Parts PM sent.

03-04-2017, 01:40 PM	#16
fatbass Registered User Join Date: May 2012 Location: South Ogden, Utah Posts: 170	Re: Left over 72 Parts Payment sent. Thanks! Will I need any adapters or will this work with my stock '71 non-tilt column and horn button? I can fab but I'd prefer not to. Jim

03-04-2017, 10:43 PM	#17
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts THis should fit right on without adapters. It was on my stock 72 column. __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

03-04-2017, 10:44 PM	#18
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Ttt for the weekend __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

03-22-2017, 11:38 AM	#19
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Ttt __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

09-01-2017, 01:02 AM	#20
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Ttt for the weekend __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455



Register or Log In To remove these advertisements.

09-01-2017, 04:36 PM	#21
crossjo Registered User Join Date: Apr 2009 Location: Moulton, AL Posts: 97	Re: Left over 72 Parts What's the best you would do on both wiring harness'. I don't really need them but put them up in case one day. Thanks!

09-03-2017, 10:40 AM	#22
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Ij will do $60 for both if that works for you. __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

09-09-2017, 12:50 AM	#23
AASmedic Registered User Join Date: Dec 2015 Location: Albuquerque Posts: 773	Re: Left over 72 Parts Ttt for the weekend. I'm open to offers. __________________ My Paypal address is: http://paypal.me/KFerguson66 72 K20 Cheyenne Super My "re-build" thread http://67-72chevytrucks.com/vboard/s...?t=710221&goto Thread for my Reproduction Jack Bags http://67-72chevytrucks.com/vboard/s...d.php?t=715455

Register or Log In To remove these advertisements.