The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-08-2018, 04:02 PM   #1
botoepfer
Junior Member
 
botoepfer's Avatar
 
Join Date: Dec 2017
Location: Prince Frederick
Posts: 81
292 motor mounts used in swap!

Hi folks I am searching the correct mounts for a late model 292 I am putting this motor in a 1963 C-10 I wish to retain the mech. fuel pump , The late model 292 I have had the smog pump so I gather its a late model the mounts on the block will accept the typical SBC motor mount I have parted out an 83 c10 for all the upgrades My question is will the Chassis mounts work in this case,, I am using the front cross member from the 83 as well..Thanks
Attached Images
  
botoepfer is offline   Reply With Quote
Old 11-09-2018, 12:56 AM   #2
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 21,548
Re: 292 motor mounts used in swap!

The '83 engine mount brackets will of course bolt to the suspension crossmember, but spacers on top of the frame may be needed. However if yoiu are wanting this engine to bolt up to your original crossmember mounted bellhousing, that could be an issue. Using a set of '63-'72 292 engine mounts and all related brackets would simplify the installation.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-09-2018, 05:21 PM   #3
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,202
Re: 292 motor mounts used in swap!

I totally agree with Capt fab....the best route you can take , is what he stated! The other route, will be more work Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Old 11-10-2018, 04:45 PM   #4
'68OrangeSunshine
Senior Member
 
'68OrangeSunshine's Avatar
 
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 4,398
Re: 292 motor mounts used in swap!

The 292's debut year was MY 1963. There should be parts for that somewhere.
The Passenger Side mounts have become an availability problem, as most V8 engine changers could care less about L6 parts.
The first 292's were painted Alpine Green [VHT Detroit Diesel Green is closest.]
230s and 250s were blue. In MY '67 General Motors decided to paint all engines Chevy Engine Orange, a color previously only on the SBCs.
__________________


Every 25 years I like to rebuild that 292, whether it needs it or not.
'68OrangeSunshine is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:14 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com