Cab Differences manual to auto

[mikewarme]

Does anyone know if a manual cab can be made to auto? Or can the pedals not be switched and the trans tunnel different? Once upon a time I though only the tunnel cover was different

[In The Ten Ring]

Most people tend to prefer auto transmissions and convert their trucks over to it.

[Smitty]

The steering column and shift linkage are changed. As is the neutral safety switch and wiring for it. The clutch pedal is removed from the pedal assembly. Just a couple that come to mind. The drive shaft will be a different length. And the cross member for the transmission must be located in a different location. I went from a 3-speed to a 700R4 years ago.

[Doug's68SS]

As far as the Cab goes they are the same, on the Auto Cab GM put a small cover plate over the hole that the clutch rod comes out of, held in by screws. the pedal assemblies will interchange with a few bolts at the firewall and bottom side of the dash. all else is the same.

[Smitty]

clultch pedal can be removed from the assembly. No need to get a different unit.