157" C30 Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972K20 · 06-24-2017, 11:51 PM

Has anyone here put a pickup bed on a 157" cab and chassis frame? Please post pics if you have. If anyone has done this, it has probably been a crew cab or something similar. I'm curious to see how it would look with the way the frame "kicks up" at the rear.

**LockDoc** · 06-24-2017, 11:59 PM

Quote:

Originally Posted by 1972K20

Has anyone here put a pickup bed on a 157" cab and chassis frame? Please post pics if you have. If anyone has done this, it has probably been a crew cab or something similar. I'm curious to see how it would look with the way the frame "kicks up" at the rear.

You can put a Longhorn bed on a 133" cab & chassis frame but the bed for a 157" frame would have to special built..... Even with a crew I think the frame would be too long.

LockDoc

**special-K** · 06-25-2017, 07:06 AM

I had a 157" C/30 tears ago and before I went with a service body I was considering shortening for a pickup bed. I had never seen anyone do a pickup bed on a C/30 chassis, so was on my own. I looked at it and was thinking the dip in the frame is too great, yet I never went into measurements. Do the 157s bend more than the 133s and pickups? Again, something I never checked or compared. But, that's something I've wondered about

**71blksuper4x4** · 06-25-2017, 09:34 AM

157" frame

**71blksuper4x4** · 06-25-2017, 09:40 AM

I didn't have to splice the frame. Worked out for my application.

**71blksuper4x4** · 06-25-2017, 09:47 AM

I had to replace bed crossmembers.

BLAZERMAN · 06-25-2017, 10:21 AM

I had planed this with a lengthened stepside bed and found that the 157" chassis had a 2" higher rise at the kickup. I plan to split the difference and raise the cab 1" and lower the bed 1" by notching the frame to clear one bed crossmember.

Trevor, Your truck is looking awesome! How did you get around the extra 2" rise in the frame? And on wheelbase did you move spring perches up?

**71blksuper4x4** · 06-25-2017, 11:44 AM

Thanks Rob, for this truck, I lifted the body 1", which also helps clearance I am sure for the Allison, I also removed a couple bed cross members and replaced them with the shorter type. I did not have to weld the frame back together, I moved the spring perches forward and rear crossmember. Then I could cut off the excess rear of the frame. This should be one stout frame for the Duramax.

1972K20 · 06-25-2017, 01:41 PM

Thanks Trevor for your reply and insight. You did a great job making the bed fit. Your truck looks awesome and should be plenty stout!

06-24-2017, 11:51 PM	#1
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 739	157" C30 Question Has anyone here put a pickup bed on a 157" cab and chassis frame? Please post pics if you have. If anyone has done this, it has probably been a crew cab or something similar. I'm curious to see how it would look with the way the frame "kicks up" at the rear.

06-25-2017, 07:06 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: 157" C30 Question I had a 157" C/30 tears ago and before I went with a service body I was considering shortening for a pickup bed. I had never seen anyone do a pickup bed on a C/30 chassis, so was on my own. I looked at it and was thinking the dip in the frame is too great, yet I never went into measurements. Do the 157s bend more than the 133s and pickups? Again, something I never checked or compared. But, that's something I've wondered about __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-25-2017, 09:34 AM	#4
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: 157" C30 Question 157" frame Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

06-25-2017, 09:40 AM	#5
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: 157" C30 Question I didn't have to splice the frame. Worked out for my application. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

06-25-2017, 09:47 AM	#6
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: 157" C30 Question I had to replace bed crossmembers. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

06-25-2017, 10:21 AM	#7
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: 157" C30 Question I had planed this with a lengthened stepside bed and found that the 157" chassis had a 2" higher rise at the kickup. I plan to split the difference and raise the cab 1" and lower the bed 1" by notching the frame to clear one bed crossmember. Trevor, Your truck is looking awesome! How did you get around the extra 2" rise in the frame? And on wheelbase did you move spring perches up? __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

06-25-2017, 11:44 AM	#8
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,149	Re: 157" C30 Question Thanks Rob, for this truck, I lifted the body 1", which also helps clearance I am sure for the Allison, I also removed a couple bed cross members and replaced them with the shorter type. I did not have to weld the frame back together, I moved the spring perches forward and rear crossmember. Then I could cut off the excess rear of the frame. This should be one stout frame for the Duramax. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

06-25-2017, 01:41 PM	#9
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 739	Re: 157" C30 Question Thanks Trevor for your reply and insight. You did a great job making the bed fit. Your truck looks awesome and should be plenty stout!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.