CO ISO - rear seat floor plates etc..

[CK5]

Looking for the 4 rear seat floor plates as well as the 2 captured nut plates for mounting the front of the rear seat.

Also need the 6 bolts used to bolt the rear seat down. Attached pics of what I'm looking for, thanks.

[Blazerowner]

You would be better off making them yourself. That's what I did. You can buy those cage nuts from McMaster car far pretty cheap. I bought some sheet metal stock from tractor supply and cut the plates myself. Hard to tell it's not original and my blazer didn't come with a rear seat.

[1rippen6]

I found 2 they do have some pitting I probably have the nuts also but would have to empty out the blazer and see if they are still there. I can't look underneath they sprayed the underneath with spray foam. Do you also need the channel that goes underneath for the rear seat mounts?

[CK5]

I might be interested in the underneath channel as long as it is from a 71-72.

[1rippen6]

Originally Posted by CK5

I might be interested in the underneath channel as long as it is from a 71-72.

Yep, has to be from a 71 or 72 never owned a 69 or 70. I have plans tonight will post a picture tomorrow.

[1rippen6]

Do you still need the other parts or are you good.

[CK5]

Originally Posted by 1rippen6

Do you still need the other parts or are you good.

Thanks, I'll let you know, going to check out some local part outs this week.

[1rippen6]

Here is the channel it had a broken bolt so I welded a nut on what was left and heated the nut up. Threads look fine on all 4 nuts does have some pitting but no thin spots. 60 plus shipping if interested send me you zip and I will get a shipping quote.

[CK5]

Thanks for the pics 1rippen6, I was able to get all the parts I needed today locally.

[1rippen6]

Originally Posted by CK5

Thanks for the pics 1rippen6, I was able to get all the parts I needed today locally.

No problem

[2006gmcdmax]

I'm searching for that lower channel too for my 72 Blazer. I'm willing to pay up for a clean one like the one in the picture.

[1rippen6]

Originally Posted by 2006gmcdmax

I'm searching for that lower channel too for my 72 Blazer. I'm willing to pay up for a clean one like the one in the picture.

PM returned