RideTech's New C10 CoilOver Kits - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slowcpe · 12-07-2014, 11:53 AM

Truck looks great. Killer stance!

Kook87 · 12-07-2014, 04:05 PM

Quote:

Originally Posted by slowcpe

Truck looks great. Killer stance!

Thanks

duallyjams · 12-07-2014, 06:17 PM

Quote:

Originally Posted by Kook87

Thanks

do you have a pic of the front cross member ground clearance

Kook87 · 12-07-2014, 06:48 PM

[URL=http://s852.photobucket.com/user/kook_2010/media/cars/20141207_173951.jpg.html]

[/URL
3 1/2" clearance at lowest point.

dkauffman05 · 12-07-2014, 07:19 PM

What sway bar do you have ?

Kook87 · 12-07-2014, 07:23 PM

Ride tech muscle bars front and rear

Hugger67rsss · 12-09-2014, 01:23 PM

Truck looks awesome, can't wait to get mine installed on my 66.

**lolife99** · 12-09-2014, 02:29 PM

Quote:

Originally Posted by Kook87

[URL=http://s852.photobucket.com/user/kook_2010/media/cars/20141207_173951.jpg.html]

[/URL
3 1/2" clearance at lowest point.

Lowest?
Meaning the bottom of the coil over shock?
Or the crossmember?

Kook87 · 12-10-2014, 05:11 PM

Quote:

Originally Posted by lolife99

Lowest?
Meaning the bottom of the coil over shock?
Or the crossmember?

Lowest point is on the bottom of the A-arm. This is the closest point to the ground.

dkauffman05 · 12-10-2014, 09:17 PM

Been thinking about my build and kinda worried about the front spring rate and ride height . I have a all aluminum ls6 and t56. What is the spring rate set up for that comes with the kit ? Sbc with iron heads? I know on my 68 when I went from an iron block ls to a aluminum block the front suspension came up a little . I didn't measure the rise but I fore sure noticed it.

Kook87 · 12-12-2014, 09:19 PM

Quote:

Originally Posted by dkauffman05

Been thinking about my build and kinda worried about the front spring rate and ride height . I have a all aluminum ls6 and t56. What is the spring rate set up for that comes with the kit ? Sbc with iron heads? I know on my 68 when I went from an iron block ls to a aluminum block the front suspension came up a little . I didn't measure the rise but I fore sure noticed it.

If you call ride tech they will tell you what you need based on info you give them.

aod92 · 12-26-2014, 01:37 PM

Quote:

Originally Posted by Kook87

I love the ride height....any bed or crossmember mods on your truck? I'm really thinking about ordering one of these kits.

Kook87 · 12-26-2014, 03:21 PM

Quote:

Originally Posted by aod92

I love the ride height....any bed or crossmember mods on your truck? I'm really thinking about ordering one of these kits.

Just the c notch that comes with the kit for the frame in the rear. Great ride and fit. I highly recommend this kit.

aod92 · 01-09-2015, 06:11 PM

I ordered my front kit last week....Hopefully I'll get the rear ordered soon. I'll post pics as its going in!

chase@ridetech · 01-12-2015, 10:45 AM

i look forward to seeing it.

chase@ridetech · 02-04-2015, 10:33 AM

Quote:

Originally Posted by aod92

I ordered my front kit last week....Hopefully I'll get the rear ordered soon. I'll post pics as its going in!

Did you get your kit bolted on yet?

Hugger67rsss · 02-04-2015, 01:00 PM

I got the kit installed for my 66 and the frame powdercoated. Still a long ways to go before I set the cab and bed back on but I am very happy with the quality of the parts.

Hugger67rsss · 02-04-2015, 01:02 PM

Still need to tighten all the bolts and order front spindles and sway bars.

chase@ridetech · 02-04-2015, 03:31 PM

Quote:

Originally Posted by Hugger67rsss

I got the kit installed for my 66 and the frame powdercoated. Still a long ways to go before I set the cab and bed back on but I am very happy with the quality of the parts.

Looks great! Being a GMC was your truck a Trailing arm truck from factory or a leaf sprung truck?

Hugger67rsss · 02-04-2015, 03:58 PM

It was factory leaf springs, I called and talked to Josh when I was installing it. I only had 1 hole to line up the notch template. I got it figured out though.

chase@ridetech · 02-04-2015, 05:18 PM

Good, We need to get a GMC in here to do an updated template. We have several customers with leaf sprung trucks converted over, but just haven't had one here to check the reference holes.

aod92 · 02-04-2015, 08:11 PM

Quote:

Originally Posted by chase@ridetech

Did you get your kit bolted on yet?

Not yet. I'm waiting on the powder coater right now. Soon as I get that back I'll start posting pics.

dkauffman05 · 03-17-2015, 10:01 AM

Plan to order tires for my build that has this ridetech kit. I'm have 18x9.5 in the front with 5.5 backspace. I'd like to run a 295-40-18 front and rear. What do you guys think ? I have stock inner fenders also.

aod92 · 03-17-2015, 10:31 AM

I started installing mine this past weekend. Goes together very easy...this ridetech stuff is very nice!

soundqdoug · 03-28-2015, 06:20 PM

Can the factory front sway bar be used with this kit, or do you have to buy the MuscleBar?

12-07-2014, 11:53 AM	#76
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: RideTech's New C10 CoilOver Kits Truck looks great. Killer stance! __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

12-07-2014, 06:48 PM	#79
Kook87 Registered User Join Date: Oct 2014 Location: Tipton, In Posts: 59	Re: RideTech's New C10 CoilOver Kits [URL=http://s852.photobucket.com/user/kook_2010/media/cars/20141207_173951.jpg.html][/URL 3 1/2" clearance at lowest point. __________________ Don't sweat the petty things and don't pet the sweaty things.

12-07-2014, 07:19 PM	#80
dkauffman05 Registered User Join Date: Jan 2008 Location: Cumming, Georgia Posts: 416	Re: RideTech's New C10 CoilOver Kits What sway bar do you have ?

12-07-2014, 07:23 PM	#81
Kook87 Registered User Join Date: Oct 2014 Location: Tipton, In Posts: 59	Re: RideTech's New C10 CoilOver Kits Ride tech muscle bars front and rear __________________ Don't sweat the petty things and don't pet the sweaty things.

12-09-2014, 01:23 PM	#82
Hugger67rsss Registered User Join Date: Jan 2013 Location: Westport In. Posts: 33	Re: RideTech's New C10 CoilOver Kits Truck looks awesome, can't wait to get mine installed on my 66.

12-10-2014, 09:17 PM	#85
dkauffman05 Registered User Join Date: Jan 2008 Location: Cumming, Georgia Posts: 416	Re: RideTech's New C10 CoilOver Kits Been thinking about my build and kinda worried about the front spring rate and ride height . I have a all aluminum ls6 and t56. What is the spring rate set up for that comes with the kit ? Sbc with iron heads? I know on my 68 when I went from an iron block ls to a aluminum block the front suspension came up a little . I didn't measure the rise but I fore sure noticed it.

01-09-2015, 06:11 PM	#89
aod92 Registered User Join Date: Dec 2014 Location: Plainfield il. Posts: 643	Re: RideTech's New C10 CoilOver Kits I ordered my front kit last week....Hopefully I'll get the rear ordered soon. I'll post pics as its going in!

01-12-2015, 10:45 AM	#90
chase@ridetech Registered User Join Date: Jun 2013 Location: Jasper Posts: 256	Re: RideTech's New C10 CoilOver Kits i look forward to seeing it.

02-04-2015, 01:00 PM	#92
Hugger67rsss Registered User Join Date: Jan 2013 Location: Westport In. Posts: 33	Re: RideTech's New C10 CoilOver Kits I got the kit installed for my 66 and the frame powdercoated. Still a long ways to go before I set the cab and bed back on but I am very happy with the quality of the parts. Attached Images __________________ Aarik Gault 1966 GMC SWB, Ridetech Suspenion 1968 Camaro autocross/track car

02-04-2015, 01:02 PM	#93
Hugger67rsss Registered User Join Date: Jan 2013 Location: Westport In. Posts: 33	Re: RideTech's New C10 CoilOver Kits Still need to tighten all the bolts and order front spindles and sway bars. Attached Images __________________ Aarik Gault 1966 GMC SWB, Ridetech Suspenion 1968 Camaro autocross/track car

02-04-2015, 03:58 PM	#95
Hugger67rsss Registered User Join Date: Jan 2013 Location: Westport In. Posts: 33	Re: RideTech's New C10 CoilOver Kits It was factory leaf springs, I called and talked to Josh when I was installing it. I only had 1 hole to line up the notch template. I got it figured out though. __________________ Aarik Gault 1966 GMC SWB, Ridetech Suspenion 1968 Camaro autocross/track car

02-04-2015, 05:18 PM	#96
chase@ridetech Registered User Join Date: Jun 2013 Location: Jasper Posts: 256	Re: RideTech's New C10 CoilOver Kits Good, We need to get a GMC in here to do an updated template. We have several customers with leaf sprung trucks converted over, but just haven't had one here to check the reference holes.

03-17-2015, 10:01 AM	#98
dkauffman05 Registered User Join Date: Jan 2008 Location: Cumming, Georgia Posts: 416	Re: RideTech's New C10 CoilOver Kits Plan to order tires for my build that has this ridetech kit. I'm have 18x9.5 in the front with 5.5 backspace. I'd like to run a 295-40-18 front and rear. What do you guys think ? I have stock inner fenders also.

03-17-2015, 10:31 AM	#99
aod92 Registered User Join Date: Dec 2014 Location: Plainfield il. Posts: 643	Re: RideTech's New C10 CoilOver Kits I started installing mine this past weekend. Goes together very easy...this ridetech stuff is very nice! Attached Images

03-28-2015, 06:20 PM	#100
soundqdoug Registered User Join Date: Aug 2012 Location: Oxnard, CA Posts: 114	Re: RideTech's New C10 CoilOver Kits Can the factory front sway bar be used with this kit, or do you have to buy the MuscleBar?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.