The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Old 11-10-2005, 08:53 PM   #76
BigSky71
LAIDOUT
 
BigSky71's Avatar
 
Join Date: Jan 2005
Location: NW Montana
Posts: 928
Re: Wheel/Tire Fitment Pictures & Info

I am ready to order my wheels and tires and can't decide on the size for the rear. I have decided on 255/45 18s [18x8 wheel] for the front but can't decide if I should go with 295/40 20s on the rear or 315/35 20s [20x10 wheel]. I originally planned on the 295s but my tire guy thinks the 315s would look better... I am not sure.

I think that having the sidewall heights match is important so I used the tire sizing guide at 1010tires.com and the 315s theoretically have a side wall height of 4.34". The 295/40s are said to be 4.64". The front 255/45s would be 4.51". I like the idea of 12.5" of tread width on the 315s, but wonder if the tire would look like it needs to be on a wider rim, which I don't want. I don't have to worry about having enough room for the 315s width because I have a shortened rear-end and have tubbed the bed 5.5" on each side. And the truck will have air ride so they have to tuck.

Anyone fit 315s on a 10" rim?
__________________
67 2wd Shorty
Build Pictures
BigSky71 is offline  
Old 11-21-2005, 12:20 AM   #77
sinistershee
Registered User
 
Join Date: Nov 2005
Location: utah
Posts: 1
Re: Wheel/Tire Fitment Pictures & Info

hi guys im new here and was wondering on what size tires would fit on my truck its a 72 1/2 ton 2wd lwb i want to put 20's on it and i plan on putting a 4/6 inch drop on it. will they fit? and what size tire do i need? i think a 245/40/20 or a 275/40/20 might be ok or maybe a 45 series, please let me know what you think. thanks
sinistershee is offline  
Old 11-29-2005, 01:17 AM   #78
sbc421
Registered User
 
sbc421's Avatar
 
Join Date: Jul 2002
Location: La Porte, TX
Posts: 24
Exclamation Re: Wheel/Tire Fitment Pictures & Info

Here is my setup... Tire size is 31/16.50/15 Mickey Thompson ET Streets on 15" x 12" Weld Draglite wheels with 7.5"s of back-spacing. (NO these wheels will not fit on your stock truck, however they will if you change out your axles, I went with 35 Spline Moser's) Weld Draglites only come in 5 on 4.5 or 5 on 4.75 bolt circles. I have also included a couple of pics of my trailing arm modification... I have added the ability to adjust my trailing arms up or down in the front to suit my traction needs.
Attached Images
     
__________________
1970 Model C10 LWB, Small Block 421 CID, AFR 220 Heads, 1050 Dominator, Super Victor Intake, Comp Cams Mech Roller, Comp Cams ProMagnum Roller Rockers, 13.8:1 Compression, 4500 RPM TCI Converter, TH400 TCI Transmission w/reverse manual valve body w/trans brake, 5.13 Rear Gear on a full Spool, 31-16.50-15 Mickey Thompson ET Streets
sbc421 is offline  
Old 12-02-2005, 12:16 AM   #79
67-72chevyman
Registered User
 
Join Date: Oct 2005
Location: West Virginia
Posts: 136
Re: Wheel/Tire Fitment Pictures & Info

What is the bigest height tire can you use on the back of a 2 wheel drive half ton truck with stock suspension, without being lifted up. And how wide?

Last edited by 67-72chevyman; 12-02-2005 at 12:27 AM.
67-72chevyman is offline  
Old 12-04-2005, 11:36 PM   #80
Chucky72
Registered User
 
Join Date: Jul 2000
Location: NY
Posts: 241
Re: Wheel/Tire Fitment Pictures & Info

anyone ever thought of doing a mini tub with 15x12 with like 18 or 17x7 or even 6s for like a rail type dragster look? i have a long box so i think it will look good
maybe some one has done it if so anyone have a pictures
__________________
1972 Chevrolet C/10 LWB 350ci/350th
completely apart
Chucky72 is offline  
Old 12-05-2005, 07:11 PM   #81
Slick71
Registered User
 
Slick71's Avatar
 
Join Date: Feb 2001
Location: Savannah, MO.
Posts: 513
Re: Wheel/Tire Fitment Pictures & Info

Here's a 4x4 pic. 3/4 ton, 4 inch suspension lift, tires are 33 x 15.5 x 16 and wheels are 16 x 10. Doesn't rub, but throws the mud!!
Attached Images
  
__________________
1972 Chevy Blazer 4X4
Savannah, MO.
www.thefarmatadair.com
Slick71 is offline  
Old 12-12-2005, 01:39 AM   #82
Scottb
Registered User
 
Join Date: Oct 2005
Location: Reno, NV
Posts: 17
Re: Wheel/Tire Fitment Pictures & Info

i had some 275/85/16's on the front with no problem and some 35X12.50's on the rear that only rubbed with about 1000 lbs on the truck if i hit a bump (never heard it, just saw some paint was worn down). 70 GMC stock height- 81 chevy control arms in front, stock dana 60 in back.... C2500

sorry- only pic i could find on short notice...

oh, found another one- both in the dark...
__________________
70 GMC C2500 BB 402, LSD Dana 60 rear, Converted to SM 465, Holley 750, Edelbrock Performer RPM air-gap intake, Flowtech Headers, 2.5" Flomaster Exhaust, HEI ignition, 81 Chevy disk Brakes.
All work done by myself. last 1/4 mile (almost 3 years ago) 15.9 @ 86

Last edited by Scottb; 12-12-2005 at 01:46 AM.
Scottb is offline  
Old 12-14-2005, 11:31 PM   #83
68-shorty
Registered User
 
Join Date: Nov 2005
Location: san diego
Posts: 1
Re: Wheel/Tire Fitment Pictures & Info

I love the style of your truck!I have searched high and low to find pictures of a flat black slammed 67-72.Do you have any more pictures you could send me?I would appreciate it.My E-mail is boxwoodboy@aol.com Thanks-David
68-shorty is offline  
Old 12-25-2005, 03:40 PM   #84
Blue85
Oilfield Trash
 
Blue85's Avatar
 
Join Date: Sep 2003
Location: Raymore, Sk, Canada, Earth
Posts: 3,171
Re: Wheel/Tire Fitment Pictures & Info

Can someone with a stock height SWB 1/2ton 2WD take some fender to ground measurments for me, po of my truck said it is a 2/4 drop, but seems to be a bit lower, more like 3/5.
__________________
14 Dodge 3500 Mega Cab
08 Dodge 3500 Mega Cab
87 Chev 3+3 4x4
80 GMC K10 High Sierra bone stock
70 Chevelle 350SS long term project
68 GMC 3ton Grain Truck/Garbage wagon
50 Pontiac 2 Door Coupe Project
"I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.
Blue85 is offline  
Old 01-07-2006, 06:03 PM   #85
Blue85
Oilfield Trash
 
Blue85's Avatar
 
Join Date: Sep 2003
Location: Raymore, Sk, Canada, Earth
Posts: 3,171
Re: Wheel/Tire Fitment Pictures & Info

Anyone?
__________________
14 Dodge 3500 Mega Cab
08 Dodge 3500 Mega Cab
87 Chev 3+3 4x4
80 GMC K10 High Sierra bone stock
70 Chevelle 350SS long term project
68 GMC 3ton Grain Truck/Garbage wagon
50 Pontiac 2 Door Coupe Project
"I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.
Blue85 is offline  
Old 01-10-2006, 08:49 PM   #86
72MARIO
Registered User
 
72MARIO's Avatar
 
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,052
Re: Wheel/Tire Fitment Pictures & Info

Wheel to ground is not a accurate measurement. Wheel and tire sizes will vary that measurement.

I have the rear drop measurement from a few guys with ECE 6" and they have between 2.5" to 3" between the axel and frame.
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair
http://67-72chevytrucks.com/vboard/s...d.php?t=625017
1967 C/20 6.0/4L80 Roofing Truck
1990 V2500 Suburban "Plow Truck"
2005 TAHOE DD
72MARIO is offline  
Old 01-11-2006, 05:58 PM   #87
see ten
WTB this ad
 
see ten's Avatar
 
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,073
Re: Wheel/Tire Fitment Pictures & Info

Wheels are 15x8 and tires are 275/60 on all four corners. Drop is Early Classic 3.5" front and 6" rear.


see ten is offline  
Old 01-13-2006, 12:05 AM   #88
bighead
Registered User
 
Join Date: Nov 2005
Location: McKinney, Texas
Posts: 465
Re: Wheel/Tire Fitment Pictures & Info

Wow. nice truck seen ten! Any tire rubbing problems with that combination?
bighead is offline  
Old 01-13-2006, 04:24 PM   #89
see ten
WTB this ad
 
see ten's Avatar
 
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,073
Re: Wheel/Tire Fitment Pictures & Info

Quote:
Originally Posted by bighead
Wow. nice truck seen ten! Any tire rubbing problems with that combination?
Thanks man. My only rubbing problem is the rims want to rub on the control arms when the wheel is cut deep at speed. It has only happened once while pulling into a parking spot way to quick. I think it's that syndrome of combining a drop spindle and 15" wheel. I am currently shopping for some new 17" rollers that should solve the problem.
see ten is offline  
Old 01-13-2006, 04:34 PM   #90
72MARIO
Registered User
 
72MARIO's Avatar
 
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,052
Re: Wheel/Tire Fitment Pictures & Info

I will confirm that the rim width is the issue. I have 7" van rallys up front and they have never hit the controll arm. That 1" must be the clearance needed.
My front drop is 2.5 spindle and a 1" coil.
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair
http://67-72chevytrucks.com/vboard/s...d.php?t=625017
1967 C/20 6.0/4L80 Roofing Truck
1990 V2500 Suburban "Plow Truck"
2005 TAHOE DD
72MARIO is offline  
Old 01-14-2006, 01:03 PM   #91
davidh
Senior Member
 
davidh's Avatar
 
Join Date: Feb 2004
Location: Ponca city now kingfisher Oklahoma
Posts: 1,221
Re: Wheel/Tire Fitment Pictures & Info

Quote:
Originally Posted by see ten
Thanks man. My only rubbing problem is the rims want to rub on the control arms when the wheel is cut deep at speed. It has only happened once while pulling into a parking spot way to quick. I think it's that syndrome of combining a drop spindle and 15" wheel. I am currently shopping for some new 17" rollers that should solve the problem.

I love the back view. How much land you got? You could hide a few parts trucks back in those trees as well. Nice shop too.
davidh is offline  
Old 01-14-2006, 09:36 PM   #92
see ten
WTB this ad
 
see ten's Avatar
 
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,073
Re: Wheel/Tire Fitment Pictures & Info

Quote:
Originally Posted by davidh
I love the back view. How much land you got? You could hide a few parts trucks back in those trees as well. Nice shop too.
I will be sure to pass on the compliment to my buddy who owns the place . His shop is the same size as mine but since he has a torch and a mega air compressor we did the drop at his place. As far as acreage there lets just say "a lot".
see ten is offline  
Old 01-18-2006, 06:21 AM   #93
gringoloco
A guy with a truck
 
gringoloco's Avatar
 
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,920
Re: Wheel/Tire Fitment Pictures & Info

Found this tonight: http://www.autowaretech7.net/nextwheels/newstal.htm

It has over 300 different classic cars/trucks and a boatload of sweet wheels.
Also allows you to lower the vehicle, change wheel sizes and change colors. Veeeery coooool!
__________________
-Chris

Instagram _elgringoloco_

'70 Short-Wide How to: Ruin a perfectly good C10
‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd
'72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD)
'72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD)
'05 Yukon Daily Driven (not so stock) Yukon (SOLD)
‘07 Yukon Denali (daily)

Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy
gringoloco is offline  
Old 01-18-2006, 09:17 PM   #94
ozzcart_83
Registered User
 
Join Date: Jan 2006
Location: Ottawa, Kansas
Posts: 5
Re: Wheel/Tire Fitment Pictures & Info

1970 with 68 bed, 67 front clip, dropped 2.5/4, 2.5 drop coils up front, and 4 inch blocks in the back. 18 inch american eagle series 187. 245/45/18 all the way around.
Attached Images
 
ozzcart_83 is offline  
Old 01-19-2006, 01:26 AM   #95
smbrouss70
Registered User
 
smbrouss70's Avatar
 
Join Date: Sep 2003
Location: Rayne, LA
Posts: 2,782
Re: Wheel/Tire Fitment Pictures & Info

Quote:
Originally Posted by ozzcart_83
1970 with 68 bed, 67 front clip, dropped 2.5/4, 2.5 drop coils up front, and 4 inch blocks in the back. 18 inch american eagle series 187. 245/45/18 all the way around.
Got a bigger pic?
__________________
Steven

"If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers
R.I.P. Oscar

R.I.P. Ratchet

1967 Pontiac GTO - Dad was the Original Owner
1970 Chevy 2wd SWB "Oscar's Truck"
1970 Chevy 2wd Blazer "Ratchet's Blazer"
2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar"
2017 Chevy Suburban "BDB"
2020 Chevy Blazer Premier "Foxy"

Member of Louisiana Classic Truck Club (LCTC)

Shop Build
smbrouss70 is offline  
Old 01-19-2006, 01:32 PM   #96
roughedup72
Senior Member
 
roughedup72's Avatar
 
Join Date: Oct 2005
Location: south carolina
Posts: 658
Re: Wheel/Tire Fitment Pictures & Info

heres mine before with 235/75/15 and after with 285/70/15's on all four.

Last edited by roughedup72; 06-05-2006 at 04:04 PM.
roughedup72 is offline  
Old 01-24-2006, 11:27 PM   #97
hirdo
Registered User
 
Join Date: Apr 2005
Location: Southern Cal Mountains
Posts: 14
Re: Wheel/Tire Fitment Pictures & Info

I have a 72 longhorn C30. I just ordered 18X9 rims. The truck is stock height. I could use some help in picking the right tire size. Thanks
hirdo is offline  
Old 01-31-2006, 11:35 PM   #98
incoma
Registered User
 
incoma's Avatar
 
Join Date: Mar 2004
Location: Lexington, KY
Posts: 865
Re: Wheel/Tire Fitment Pictures & Info

see ten - are your inner fenders out of that truck? I'm running a 2.5" front drop and it looks like my tires will hit the inner fenders if I go over a bump. I noticed that you said you had some rubbing when cutting corners, and didn't see any comments on the inner fenders, so I thought I'd ask.
incoma is offline  
Old 02-01-2006, 12:58 AM   #99
72MARIO
Registered User
 
72MARIO's Avatar
 
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,052
Re: Wheel/Tire Fitment Pictures & Info

I will chip in and answer your question. I am running 2.5 spindle and 1" coil. 255/60's on the 7" van rallys. NEVER has it rubbed in the last 4000 miles. I am sure both of our trucks have inner fenders.

Only diffirence is he is using 8" rallys and 275/60 up front.

What rim size do you have ?
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair
http://67-72chevytrucks.com/vboard/s...d.php?t=625017
1967 C/20 6.0/4L80 Roofing Truck
1990 V2500 Suburban "Plow Truck"
2005 TAHOE DD
72MARIO is offline  
Old 02-01-2006, 09:53 AM   #100
incoma
Registered User
 
incoma's Avatar
 
Join Date: Mar 2004
Location: Lexington, KY
Posts: 865
Re: Wheel/Tire Fitment Pictures & Info

I'm running 235/75/15 on 8" rally's today, but want to put some 255/60/17 on the truck. The 17" will have more backspacing, probably 5". Just looking at my current 27.5" setup, I've only got 3-4" between the tire and the inner fender. I just thought our suspension moved that much when going over bumps in the road.

I don't want to goof up my powder coated chassis!! Thanks for the input.
incoma is offline  
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:29 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com