The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-06-2018, 10:22 PM   #1
uhcoog1
Registered User
 
Join Date: May 2017
Location: Houston Tx
Posts: 5
Need measurement for accessories please? Between fenders and frame rails please

I need a couple measurements please. Truck is apart at the painters.

For those with an LS swap- what is the distance between the frame rails at the front edge of the accessories? And the same on the fenders please around 3-3.5" above the midpoint on the crank (in below pic- where the PS reservoir sits).

Trying to determine if the gen 5 accessory drive from Holley will fit. See below. Any help appreciated!

Thanks guys

uhcoog1 is offline   Reply With Quote
Old 07-06-2018, 11:16 PM   #2
_Ogre
Senior Member
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 6,433
Re: Need measurement for accessories please? Between fenders and frame rails please

year of truck might get you some answers
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 07-07-2018, 05:33 AM   #3
Fred T
Cantankerous Geezer
 
Fred T's Avatar
 
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,265
Re: Need measurement for accessories please? Between fenders and frame rails please

In another thread he asks about a 48 3100.
__________________
Fred

There is no such thing as too much cam...just not enough engine.
Fred T is offline   Reply With Quote
Old 07-07-2018, 12:30 PM   #4
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 10,231
Re: Need measurement for accessories please? Between fenders and frame rails please

This gives the outside measurements in some spots in the area of question. http://s173.photobucket.com/user/mr4...tml?sort=4&o=3

You would have to subtract the width of the frame rails.

I have several images of the frame drawings in that album.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 07-07-2018, 05:14 PM   #5
uhcoog1
Registered User
 
Join Date: May 2017
Location: Houston Tx
Posts: 5
Re: Need measurement for accessories please? Between fenders and frame rails please

Quote:
Originally Posted by _Ogre View Post
year of truck might get you some answers
Apologies. Yes, 1948.

Quote:
Originally Posted by mr48chev View Post
This gives the outside measurements in some spots in the area of question. http://s173.photobucket.com/user/mr4...tml?sort=4&o=3

You would have to subtract the width of the frame rails.

I have several images of the frame drawings in that album.
This is quite helpful. Thank you!
uhcoog1 is offline   Reply With Quote
Old 07-09-2018, 10:45 AM   #6
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 10,231
Re: Need measurement for accessories please? Between fenders and frame rails please

Old photo that I had in my album but you can get real close on the between the rails measurement with it with a bit of math. I'm going to be lazy and just post the link to the photobucket photo that you will have to open. http://s173.photobucket.com/user/mr4...l?sort=3&o=103
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com