|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-01-2017, 10:23 AM
|
#1 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Started build on a 66’ (Photo Heavy)
Hey all,
Long time lurker, first time poster. I have started a build on a 66 3/4 ton which belonged to a friends dad. We worked out a deal on it and its going to be for my son who is 14. The truck has 41k miles on it with a 3 on the tree and the 305 big block v6 long bed. The plan for the truck is to bag it, add power steering, 4 wheel disc brakes, do a custom interior and leave the outside old. I have had the truck a few months now and made some progress. We started with a 1985 donor which i did the crossmember swap and used the rear end out of. I bought an adjustable trailing arm crossmember and got a set of the nascar arms for pretty cheap. I then built a panhard bar and did a rear the rear disc conversion using eldorado calipers so he would still have an e-brake. The next step was installing the bag kit. It uses a bluetooth module and i used an iphone 5 i had lying around which is what will be controlling it. I then moved on to the power steering situation. Not fun, couldnt find any pulleys or brackets so I ended up modifyi g the stock pulleys along with using the crank pulley and pump from the 85 donor. I had alot of help from the previous owner who happens to own a machine shop. We split the crank pulley and he machined and welded them to my existing crank and water pump pulley. He then helped me make the pump bracket. I then welded in one of the steering box brackets and shortened the stock steering shaft and used the box from the 85 which looked like it had recently been replaced and is the 3.5 ratio. It is all in and works perfect, it is nice to have power steering! The brakes were simple as i bought the kit with master, booster, and disc proportioning valve and ran new lines using the copper nickel line. That stuff is great to work with! The interior is where i am at now and it is a work in progress. It is going to be pearl white. I bought one of those intellitronix digital dash kits for a c-10 and went to work on that. I like how it turned out. I just completed the console build. Ended up with over 50 hours in it. I even went through the trouble of making ductwork run through it so the heat will blow on the driver side😂. I could go on and on but this post would take forever so here are some pics of it so far. Bare with me.... Last edited by bigboar; 11-01-2017 at 10:30 AM. |
|
|
|
11-01-2017, 10:32 AM
|
#2 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
more...
|
|
|
|
|
11-01-2017, 10:34 AM
|
#3 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
more photos...
|
|
|
|
|
11-01-2017, 10:36 AM
|
#4 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
and some more pics....
|
|
|
|
|
11-01-2017, 10:38 AM
|
#5 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
adding more photos
|
|
|
|
|
11-01-2017, 10:41 AM
|
#6 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
power steering and heading toward inerior
|
|
|
|
|
11-01-2017, 10:47 AM
|
#7 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
interior
|
|
|
|
|
11-01-2017, 10:49 AM
|
#8 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
more console build
|
|
|
|
|
11-01-2017, 10:50 AM
|
#9 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
and some more...
|
|
|
|
|
11-01-2017, 10:52 AM
|
#10 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
sorry all, 2 groups to go..
|
|
|
|
|
11-01-2017, 10:54 AM
|
#11 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
this is it. I promise
also, not sure why but some photos are sideways or upside down. for instance, the door panels have the flames at the top.
|
|
|
|
|
11-01-2017, 11:01 AM
|
#12 |
|
Registered User
Join Date: Mar 2014
Location: Skiatook, OK
Posts: 33
|
Re: Started build on a 66’ (Photo Heavy)
I am liking where you are going with the build
|
|
|
|
|
11-01-2017, 11:02 AM
|
#13 | |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
Quote:
|
|
|
|
|
|
11-01-2017, 11:30 PM
|
#14 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: Started build on a 66’ (Photo Heavy)
Nice work
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
11-02-2017, 08:49 AM
|
#15 | |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
Quote:
|
|
|
|
|
|
11-02-2017, 08:08 PM
|
#16 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
a little more accomplished.. i bought billet knobs for the headlight,choke and wiper switches and redrilled them to fit. i also made the mount for 4” speakers in the dash(not to worried about looks with it since its hidden). Made the lower panels for the doors which will hold the 6x9s. The panels will be cover with black vinyl like the seat only I am having my shop name embroidered in them in between the speakers.
I also got everything removed from the inside and am ready to start the bodywork and get it ready to refinish. |
|
|
|
|
08-02-2018, 01:39 PM
|
#17 |
|
Registered User
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
|
Re: Started build on a 66’ (Photo Heavy)
Like the custom focus. It is going to be unique!
|
|
|
|
|
08-02-2018, 01:48 PM
|
#18 |
|
Registered User
Join Date: Mar 2014
Location: Skiatook, OK
Posts: 33
|
Re: Started build on a 66’ (Photo Heavy)
If you have time could you get into a little more detail on the console and the door speaker mounts. Basically anything interior
|
|
|
|
|
08-02-2018, 06:06 PM
|
#19 | |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
Quote:
|
|
|
|
|
|
08-02-2018, 06:07 PM
|
#20 | |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
Quote:
|
|
|
|
|
|
08-02-2018, 06:15 PM
|
#21 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Going to catch up on photos.
Last edited by bigboar; 08-02-2018 at 06:28 PM. |
|
|
|
|
08-02-2018, 06:32 PM
|
#22 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
more interior...
|
|
|
|
|
08-02-2018, 06:36 PM
|
#23 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
finishing up interior...
|
|
|
|
|
08-02-2018, 06:41 PM
|
#24 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
bedliner and floor...
|
|
|
|
|
08-02-2018, 07:18 PM
|
#25 |
|
Registered User
Join Date: Jul 2017
Location: trenton, ohio
Posts: 54
|
Re: Started build on a 66’ (Photo Heavy)
engine compartment prep and paint...
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
