01-17-2018, 01:55 PM | #1 |
Registered User
Join Date: Dec 2017
Location: Prince Frederick/obx
Posts: 106
|
Paint color match
This is Our 63 we love it and want to keep the color , Our hood seems to be beyond repair and we found a new to us Hood, How can I match the paint, Thanks
Last edited by botoepfer; 01-17-2018 at 02:04 PM. |
01-17-2018, 02:15 PM | #2 |
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,592
|
Re: Paint color match
hewittca did a great job matching his patina..read thru his build and that might help ya out.......
http://67-72chevytrucks.com/vboard/s...d.php?t=738316
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
01-17-2018, 05:50 PM | #3 |
Registered User
Join Date: Oct 2015
Location: Calgary, Alberta
Posts: 1,252
|
Re: Paint color match
Perhaps reconsider repairing the original hood? It has the natural patina and may look better repaired than a mismatched hood color?
What is damaged so badly that it can't be repaired? Pics? Maybe we can help you save it....might be easier than matching the paint? Here's the hood for the 55 Cameo I had and it fit right in with the patina in my opinion.
__________________
So when is this "Old enough to know better" supposed to kick in? My 1959 GMC build thread http://67-72chevytrucks.com/vboard/s...d.php?t=686989 |
01-17-2018, 06:04 PM | #4 |
Registered User
Join Date: Dec 2017
Location: Prince Frederick/obx
Posts: 106
|
Re: Paint color match
foot stomper Thanks for the help,, My good that is on the truck has significant rot at all four corners, The interior brace is missing about 4" from being complete, I thought about cutting the corners off the donor and going that rout but I think the little hammer and dolly work on the donor and I will come out ahead,, If you would like I will take a few detailed images over the weekend, so you can see what I am talking about ! as always Thanks
|
01-17-2018, 08:16 PM | #5 |
Registered User
Join Date: Jun 2014
Location: Mocksville, NC
Posts: 1,726
|
Re: Paint color match
Nice truck! Your paint looks very similar to mine. If you start on page 9 of my build thread here you will see the process I used to paint my bed to match the original patina on the cab. I got the paint from Sherwin Williams. My dad had a connection through work and they have a nice single stage paint that gives you a similar look to the original single stage paint. The short of it is paint it like the factory did (black primer/sealer, single stage color), and then age the paint to match the original patina. How aggressive you go depends on how faded your truck was. Mine wasn't really that bad so I used 400 grit to slowly work the paint in common wear areas until the primer just started showing through. Then I worked up to 2000 grit to level everything. From there, what you do is up to you. I like the dull look so I left it and just finished it off with 000 steel wool. Of course, you could go all out and polish it up to shine.
__________________
Builds: Green Gus the 68 C10 ; Sullii the 72 1500 - Instagram: @dr.hewitt - C10 Concept/Development Photos: Master Thread |
Bookmarks |
|
|