The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-23-2016, 07:40 AM   #1
dirish
Registered User
 
dirish's Avatar
 
Join Date: Dec 2012
Location: Heart of Tennessee
Posts: 1,124
anyone have stock alignment specs?

Taking a 72 k5 for alignment soon. Looking for
Anyone with factory specs, or best suggestions.
Blazer has no lift, with 31x10.50's. Pretty much stock.
Thanks
dirish is offline   Reply With Quote
Old 02-27-2016, 06:40 PM   #2
East Tex
Registered User
 
Join Date: Feb 2013
Location: Tyler Texas
Posts: 288
Re: anyone have stock alignment specs?

I would set the toe straight up or 1/32" toe in, if I had all new front end parts. If you're dealing with old existing parts, I'd set it 1/32" in. Or if there were some play in the parts set it 1/16" toe in. As far as caster/camber, unless your front axle housing is bent, it probably won't need adjusting. But, if I were checking caster/camber (on a 4wd), I'd want to see the caster to be close to 0 on both sides (no more than 1/4 degree in or out). And I would want the passenger side caster to be the same as the driver side or maybe up to 1/2 degree more.
__________________
My 1972 K5 6.0 LTR 4L60 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=622068
East Tex is offline   Reply With Quote
Reply

Bookmarks

Tags
1972, alignment specs, blazer, factory, stock

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com