Bolt Spacers on engine HELP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

applebmw · 03-08-2018, 09:42 PM

What you guys using for bolt spacers on your engine, like alt/AC/power steering brackets? I changed some stuff and now these cut pieces of pipe are not right lengths.

harpo231 · 03-08-2018, 09:44 PM

cut pieces of pipe

**Steeveedee** · 03-08-2018, 10:09 PM

Quote:

Originally Posted by harpo231

cut pieces of pipe

OK, on a serious note, I'm not sure I'm following the OP. How many spacers get used? I don't recall seeing all that many. Maybe there are different types of ancillary equipment installed, now (like a Sanden AC compressor, etc.)? I put a 305 Chevy engine in a Buick Skylark and the only spacer was the one for the power steering pump, because I was using headers instead of a cast iron exhaust manifold.

**kwmech** · 03-08-2018, 10:42 PM

My local hardware store has a selection of them of different lengths and hole diameter. I cut stack them or cut them down

lutronjim · 03-08-2018, 11:33 PM

I know they are long gone but old 40 era Fords steering wheel shafts were hollow - just the size for a 3/8 bolt. You just sawed off the length you needed. Unfortunately the one I had got used up.

Not making fun - I just wonder if anyone knows of any later model vehicles that might have similar shafts?

03-08-2018, 09:42 PM	#1
applebmw Registered User Join Date: Jul 2017 Location: greenville Posts: 88	Bolt Spacers on engine HELP What you guys using for bolt spacers on your engine, like alt/AC/power steering brackets? I changed some stuff and now these cut pieces of pipe are not right lengths.

03-08-2018, 09:44 PM	#2
harpo231 Registered User Join Date: Nov 2014 Location: Lincoln City DE Posts: 1,292	Re: Bolt Spacers on engine HELP cut pieces of pipe __________________ Stan 67 swb BLU MULE posted via flip-fone

03-08-2018, 10:42 PM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,390	Re: Bolt Spacers on engine HELP My local hardware store has a selection of them of different lengths and hole diameter. I cut stack them or cut them down

03-08-2018, 11:33 PM	#5
lutronjim Registered User Join Date: Dec 2013 Location: Dunwoody,Ga Posts: 443	Re: Bolt Spacers on engine HELP I know they are long gone but old 40 era Fords steering wheel shafts were hollow - just the size for a 3/8 bolt. You just sawed off the length you needed. Unfortunately the one I had got used up. Not making fun - I just wonder if anyone knows of any later model vehicles that might have similar shafts?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.