The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical


Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-13-2012, 01:25 PM   #1
Registered User
Join Date: Jan 2012
Location: Gainesville
Posts: 30
82 C10 Neutral Safety/Backup Switch Wiring

I need a little help with wiring this switch.

What I know: there are two purple wires that connect the ignition switch, NSS, and the starter (the two pins on the left). I also know the light green wire sends power to the Reverse Lights.

What I don't know: what the hell the blue wire (in the same connector as the light green) connects to and what the final pin on the NSS connects to...

I've searched and searched... checked multiple diagrams.... I'm stumped....
I'm guessing the blue wire is a power source to the NSS for the Reverse lamps, but I don't have a clue what the other pin goes to or what color wire connects to the NSS pin itself. Any help would be greatly appreciated.
Attached Images

Last edited by JCs72C10; 05-13-2012 at 01:37 PM. Reason: Picture add
JCs72C10 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 05:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2020