CA 1982 C/30 front engine x-member to frame braces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wbmoore · 04-18-2020, 10:39 PM

What I’m looking for are the two braces that go from the engine crossmember to the L and R sides of the frame. As you can see in the photo, the passenger side took a pretty good hit. I’d like to buy a pair but if only a passenger side is available...then I’ll take it.
Thanks. Brad Moore.

**The Rocknrod** · 04-22-2020, 08:53 AM

Are you needing this piece?

**Sheepdip** · 04-26-2020, 03:42 PM

I have both sides off a 86 should be the same. I'm 100 mi from you

wbmoore · 04-26-2020, 08:59 PM

Sheep dip......I found the braces but I need some other odds and ends. My truck is a ‘82 C30. I need both of the Swaybar Mounts for the frame. I need a right front fender. I need an inner fender....can’t remember which side. I need left and right inner fender plastic parts.
And probably other stuff too.
Thanks. Brad Moore.

**Sheepdip** · 04-26-2020, 10:05 PM

Quote:

Originally Posted by wbmoore

Sheep dip......I found the braces but I need some other odds and ends. My truck is a ‘82 C30. I need both of the Swaybar Mounts for the frame. I need a right front fender. I need an inner fender....can’t remember which side. I need left and right inner fender plastic parts.
And probably other stuff too.
Thanks. Brad Moore.

Can't help ya on anything else just had those left over from a 86 disc brake swap.
Glad you found your braces....one less item out of the way.

04-18-2020, 10:39 PM	#1
wbmoore Registered User Join Date: Jul 2001 Location: Big Bar, California Posts: 136	1982 C/30 front engine x-member to frame braces What I’m looking for are the two braces that go from the engine crossmember to the L and R sides of the frame. As you can see in the photo, the passenger side took a pretty good hit. I’d like to buy a pair but if only a passenger side is available...then I’ll take it. Thanks. Brad Moore. Attached Images __________________ 1967 GMC 3500 lwb dump flatbed project 1969 GMC 2500 1979 GMC 7000 fire crew truck w/water pumps 1982 C/30 Cummins NV5600 Crew Cab project

04-22-2020, 08:53 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 1982 C/30 front engine x-member to frame braces Are you needing this piece? Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-26-2020, 03:42 PM	#3
Sheepdip Senior Member Join Date: Nov 2018 Location: Waterford California Posts: 2,362	Re: 1982 C/30 front engine x-member to frame braces I have both sides off a 86 should be the same. I'm 100 mi from you

04-26-2020, 08:59 PM	#4
wbmoore Registered User Join Date: Jul 2001 Location: Big Bar, California Posts: 136	Re: 1982 C/30 front engine x-member to frame braces Sheep dip......I found the braces but I need some other odds and ends. My truck is a ‘82 C30. I need both of the Swaybar Mounts for the frame. I need a right front fender. I need an inner fender....can’t remember which side. I need left and right inner fender plastic parts. And probably other stuff too. Thanks. Brad Moore. __________________ 1967 GMC 3500 lwb dump flatbed project 1969 GMC 2500 1979 GMC 7000 fire crew truck w/water pumps 1982 C/30 Cummins NV5600 Crew Cab project

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.