The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical


Thread Tools Display Modes
Old 06-13-2019, 03:40 PM   #1
Registered User
Join Date: Mar 2019
Location: SAN RAMON
Posts: 36
Best Option to Hook Up aftermarket Horn?

Hey fellas -

Stupid questions v3.0:

The male connector for the 15A fuse on the box is loose as you can see in the pic below. Is it OK the use this loose pin as a power source for an aftermarket horn that is using a toggle switch relay - or avoid it all together?

I ask because when I did try this route, it worked fine for a while, then radio went out, then horn...basically my system DID NOT like it.

Simply put, what would be the best pin option to attached this hot wire to?
Here is a pic of the toggle relay under the dash.

Thanks in advance.
Attached Images
Starwood is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 05:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2020