Parts I’ve found, with questions. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CG · 07-21-2018, 11:53 PM

So I’m going through my parts (ugh so many), what was I thinking? Instead of a sep thread for each thing I’m clueless about I’ll just keep adding to this thread. It will help me out, and others I’m sure.

First up, these hanger hooks. At first glance I thought I had a good set and a broken set. On closer inspection the set I thought had broken tabs were actually not broken, and take a larger screw. So what years do these two sets belong to?

EDIT: This isn’t a for sale thread, just trying to figure out what I have

FURTHER EDIT: If you have a part you need identified go ahead and post it up. And if you are identifying a part please be very specific. Which picture and what year or years it goes on ...Thanks!

CG · 07-21-2018, 11:58 PM

Another I haven’t got stuck in my head yet. Ashtrays, the reddish one has bearings, the blue is just a slide. What years do thes go in?

**RenoKeene** · 07-22-2018, 12:01 AM

Either earlier or later than 67-72 I think but there are a lot of smarter folks than me on here that can chime in.

**RenoKeene** · 07-22-2018, 12:04 AM

After further review..looks like visor clips that snap in ?

CG · 07-22-2018, 12:06 AM

How bout this thing? I don’t recognize it at all. Might not even to our trucks.

**RenoKeene** · 07-22-2018, 12:15 AM

Quote:

Originally Posted by CG

How bout this thing? I don’t recognize it at all. Might not even to our trucks.

That is a throttle cable bracket that mounts to the intake, not sure of the year.

**RenoKeene** · 07-22-2018, 12:19 AM

or the trans kickdown bracket inside the cab.

BRL · 07-22-2018, 06:07 AM

Quote:

Originally Posted by CG

...Ashtrays, the reddish one has bearings...

My '69 C-10 ashtray has bearings and looks like that one too.

**special-K** · 07-22-2018, 08:18 AM

'67 sun visor clips

I think the way the ashtrays work is '67 has thin face w/straight sliders, 68-70 use the ball rollers, and 71/72 has curved sliders with same face as 68-70. So you have the two latter ones there.

Not exactly sure on the brackets, but I agree something to to with a cable end, like throttle.

I have parts I need to ID as well and thought about starting a thread like this

CG · 07-22-2018, 08:29 AM

Quote:

Originally Posted by special-K

'67 sun visor clips

I think the way the ashtrays work is '67 has thin face w/straight sliders, 68-70 use the ball rollers, and 71/72 has curved sliders with same face as 68-70. So you have the two latter ones there.

Not exactly sure on the brackets, but I agree something to to with a cable end, like throttle.

I have parts I need to ID as well and thought about starting a thread like this

Which ones are you saying the 67's are? Are all the rest of the years the same as the non 67?

I say anyone that needs a part identified go ahead and stick it here

**special-K** · 07-22-2018, 09:20 AM

The snap-in clips are '67 and the rest are all the other version. I have a bunch of bumper brackets I get all crossed up on any time I dig them out to see what I have. I'll get some pictures of those.

How about this 4wd high hump in the lower right? Not sure if it's from a 3spd/Dana20 or 3spd Rockwell combination

CG · 07-24-2018, 08:30 AM

Still a couple unanswered ... Guesses don't count lol!

More pics and questions coming and welcomed.

07-21-2018, 11:53 PM	#1
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,788	Parts I’ve found, with questions. So I’m going through my parts (ugh so many), what was I thinking? Instead of a sep thread for each thing I’m clueless about I’ll just keep adding to this thread. It will help me out, and others I’m sure. First up, these hanger hooks. At first glance I thought I had a good set and a broken set. On closer inspection the set I thought had broken tabs were actually not broken, and take a larger screw. So what years do these two sets belong to? EDIT: This isn’t a for sale thread, just trying to figure out what I have FURTHER EDIT: If you have a part you need identified go ahead and post it up. And if you are identifying a part please be very specific. Which picture and what year or years it goes on ...Thanks! Attached Images Last edited by CG; 07-22-2018 at 08:33 AM.

07-21-2018, 11:58 PM	#2
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,788	Re: Parts I’ve found, with questions. Another I haven’t got stuck in my head yet. Ashtrays, the reddish one has bearings, the blue is just a slide. What years do thes go in? Attached Images

07-22-2018, 12:01 AM	#3
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,011	Re: Parts I’ve found, with questions. Either earlier or later than 67-72 I think but there are a lot of smarter folks than me on here that can chime in. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

07-22-2018, 12:04 AM	#4
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,011	Re: Parts I’ve found, with questions. After further review..looks like visor clips that snap in ? __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

07-22-2018, 12:06 AM	#5
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,788	Re: Parts I’ve found, with questions. How bout this thing? I don’t recognize it at all. Might not even to our trucks. Attached Images

07-22-2018, 12:19 AM	#7
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,011	Re: Parts I’ve found, with questions. or the trans kickdown bracket inside the cab. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

07-22-2018, 08:18 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Parts I’ve found, with questions. '67 sun visor clips I think the way the ashtrays work is '67 has thin face w/straight sliders, 68-70 use the ball rollers, and 71/72 has curved sliders with same face as 68-70. So you have the two latter ones there. Not exactly sure on the brackets, but I agree something to to with a cable end, like throttle. I have parts I need to ID as well and thought about starting a thread like this __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-22-2018, 09:20 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Parts I’ve found, with questions. The snap-in clips are '67 and the rest are all the other version. I have a bunch of bumper brackets I get all crossed up on any time I dig them out to see what I have. I'll get some pictures of those. How about this 4wd high hump in the lower right? Not sure if it's from a 3spd/Dana20 or 3spd Rockwell combination Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-24-2018, 08:30 AM	#12
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,788	Re: Parts I’ve found, with questions. Still a couple unanswered ... Guesses don't count lol! More pics and questions coming and welcomed.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.