Did GM use the same spindles for both vans and trucks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72timemachine · 09-20-2018, 07:19 AM

For example, if you had a 1972 g/10 van with front disc and a 1972 c/10 also with front brakes, would the spindles be the same? I understand other parts on the suspension may be different.

Thanks for any help.

**clay68c10** · 09-20-2018, 12:33 PM

Knowing how GM does things, I’d suspect they are the same.
Maybe someone with a Hollander manual will check in.

09-20-2018, 07:19 AM	#1
72timemachine Registered User Join Date: Oct 2008 Location: los angeles ca Posts: 210	Did GM use the same spindles for both vans and trucks? For example, if you had a 1972 g/10 van with front disc and a 1972 c/10 also with front brakes, would the spindles be the same? I understand other parts on the suspension may be different. Thanks for any help.

09-20-2018, 12:33 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,882	Re: Did GM use the same spindles for both vans and trucks? Knowing how GM does things, I’d suspect they are the same. Maybe someone with a Hollander manual will check in. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.