suburban hitch

[56HOTRODDER]

searched the archives and most of the info is old or vague. I have a 72 K10 suburban that I want to tow my 5000# car trailer with, Is there a pay my money and bolt it on deal out there? I know I can make a number of hitches work but I have no welder at the moment and just need to haul things. The only hitch I found does not have a 2" receiver to mount the 2 5/16 " ball for my trailer. Help please.

[68c10airstream]

ECE (early classic enterprise) has the 2" bolt in hidden hitch complete assembly, t connector for trailer lights, license plate frame that lifts up, bolts, etc. First class products, first class customer service. I should have looked to see if it applies to a suburban, but i purchased it for my 68 c10 swb and use it a lot.

[Number98]

The suburban hitch does not include wiring but its rated to 5000lbs total weight. http://www.earlyclassic.com/catalog....iver%20Hitches

[56HOTRODDER]

Thanks for the link. I will order one tomorrow. Just what I was looking for

[highwinger]

revive an old thread...I just ordered one too.

[ranger danger]

I just installed this one in my 69" Burb. Its rated for 10,000lbs!!
https://www.summitracing.com/parts/CHT-14082

[notchbackgta]

Originally Posted by ranger danger

I just installed this one in my 69" Burb. Its rated for 10,000lbs!!

Post pictures of the fitment, I will need one eventually

[ranger danger]

Ill try to get to it. It takes 6 bolts to mount it. I had to drill 4 - 1/2" holes, the other 2 lined up with original holes. I will be trying it out today. I'm going to pick up a 5000lb trailer and tow it for about 100 miles.

[rocknss]

ranger danger,

How did you wire in the connector for the trailer lights?

[ranger danger]

Originally Posted by rocknss

ranger danger,

How did you wire in the connector for the trailer lights?

I got the plug from camping world. They are local. I used a test light to locate the correct wires for the left, right, brake and running lights. I stripped a 1/2" section of the outer coating off the wire and soldered on a new piece of 14 ga. that color corresponded with the trailer wires. Then I ran a 12 ga. blue wire from the cab to the rear. Wired it according to the instructions on the packaging that the plug came in.

P.S. This is NOT the first wiring job I'v done on vehicles!! I'm not an expert but I'm no novice either.

[ranger danger]

Originally Posted by notchbackgta

Post pictures of the fitment, I will need one eventually

Sorry it took me so long. Life got busy again. I left the old hand made hidden hitch in. I figure its just added strength.

[notchbackgta]

Cool, thanks for the pictures