TN Parting '60 C30 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DPowers** · 11-20-2018, 08:44 PM

Quote:

Originally Posted by whateverpratt

Might be interested in the rear axle. Does it have a no-spin or detroit?

There is not anything on it that says no spin. Let me know as it is about to go to the scrap yard- whats left of it.

ApacheNick · 11-21-2018, 11:54 PM

I could really use the leaf spring hangers if you still have them.Still haven't had any luck finding a set lol.

I know I asked about this before but you were not cutting it up yet then.

**DPowers** · 11-22-2018, 12:17 AM

PM sent

Isaiah92260 · 12-03-2018, 09:31 PM

Quote:

Originally Posted by DPowers

Sorry just now getting it pulled. Complete and no cuts that I saw. $40.00 shipped to you.

I apologize for the late response I didn’t see your response. I might have to pass on the harness only because my wiring ended up being bad all the way through and I’ll be replacing it.

I don’t have a question, how much would you ask for the whole dash? From my understanding that could be unbolted. Has the radio section been cut?

Isaiah92260 · 12-03-2018, 09:47 PM

do*

Isaiah92260 · 12-03-2018, 11:13 PM

do*

**DPowers** · 12-03-2018, 11:43 PM

I believe I have a 60-63 dash already cut out. Get $100.00 plus whatever shipping would be. I can check if you are interested. 60-63 are alot harder to get out than 64-66. Spot welds and bolts both. 60-63, you have to remove or cut out the dog leg to get to the spot welds.

Isaiah92260 · 12-04-2018, 12:36 AM

Quote:

Originally Posted by DPowers

I believe I have a 60-63 dash already cut out. Get $100.00 plus whatever shipping would be. I can check if you are interested. 60-63 are alot harder to get out than 64-66. Spot welds and bolts both. 60-63, you have to remove or cut out the dog leg to get to the spot welds.

I see. Is it original 60-61 charcoal & silver paint?
Yes I’ve heard about that.

**DPowers** · 12-04-2018, 11:46 PM

Ill have to check. It may be originally from a 62/63.

**DPowers** · 12-29-2018, 02:56 PM

Quote:

Originally Posted by Isaiah92260

I see. Is it original 60-61 charcoal & silver paint?
Yes I’ve heard about that.

The only charcoal one I have is from this '60 C30. $100.00 plus whatever shipping would be for bare dash. Let me know if of interest.

**DPowers** · 01-12-2019, 05:24 PM

All sold

6260Art · 03-07-2019, 01:37 AM

What do you want do the radio

**DPowers** · 03-07-2019, 10:20 PM

The radio was actually a Ford radio- not original. Ill have to check and see if I still have it.

6260Art · 03-07-2019, 10:56 PM

If you have an original radio I'm interested

11-21-2018, 11:54 PM	#127
ApacheNick Registered User Join Date: Apr 2016 Location: Dawson Creek, B.C. Posts: 143	Re: Parting '60 C30 I could really use the leaf spring hangers if you still have them.Still haven't had any luck finding a set lol. I know I asked about this before but you were not cutting it up yet then. __________________ Nick 1961 Apache short stepside 4X4 SBW 348/4 speed 1960 Apache C-20 long fleet custom cab BBW 283/4 Speed 1967 rust bucket Olds Cutlass with a 455 1972 GMC K-15 350/4 speed long fleet

11-22-2018, 12:17 AM	#128
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Parting '60 C30 PM sent __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

12-03-2018, 09:47 PM	#130
Isaiah92260 Registered User Join Date: Jul 2015 Location: Whittier, CA Posts: 851	Re: Parting '60 C30 do*

12-03-2018, 11:13 PM	#131
Isaiah92260 Registered User Join Date: Jul 2015 Location: Whittier, CA Posts: 851	Re: Parting '60 C30 do*

12-03-2018, 11:43 PM	#132
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Parting '60 C30 I believe I have a 60-63 dash already cut out. Get $100.00 plus whatever shipping would be. I can check if you are interested. 60-63 are alot harder to get out than 64-66. Spot welds and bolts both. 60-63, you have to remove or cut out the dog leg to get to the spot welds. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

12-04-2018, 11:46 PM	#134
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Parting '60 C30 Ill have to check. It may be originally from a 62/63. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

01-12-2019, 05:24 PM	#136
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Parting '60 C30 All sold __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

03-07-2019, 01:37 AM	#137
6260Art Registered User Join Date: Feb 2019 Location: Fresno CA Posts: 28	Re: Parting '60 C30 What do you want do the radio

03-07-2019, 10:20 PM	#138
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: Parting '60 C30 The radio was actually a Ford radio- not original. Ill have to check and see if I still have it. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

03-07-2019, 10:56 PM	#139
6260Art Registered User Join Date: Feb 2019 Location: Fresno CA Posts: 28	Re: Parting '60 C30 If you have an original radio I'm interested



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.