custom sail panel trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WhippinSaw · 05-04-2013, 01:34 PM

I want to replace my custom sail panel trim, lmc has stainless, but more expensive, classicparts has aluminum trim. Anyone have any input. (Quality, the way stainless would look, and how the aftermarket sail trim fits and where to buy.)

1963c-10 · 05-04-2013, 01:46 PM

the 60-63 sail panels were ss, the 64-66 were aluminum. there are so many original sets available, i wouldn't buy aftermarket.
Posted via Mobile Device

WhippinSaw · 05-04-2013, 03:22 PM

Thanks 1963c-10, didn't know they were stainless, my 63 passenger side is good so I will hunt for the drivers, its cheaper plus I know it will fit.

1963c-10 · 05-04-2013, 03:28 PM

i see alot of singles pop up in the classifieds and on ebay from time to time.
Posted via Mobile Device

Vernski · 05-04-2013, 11:04 PM

Hi Whipsaw three is a parts wanted on this forum and parts for sale also. Then there is Tony Smith http://4-5-6chevytrucks.com/about-us.html Tony deals mostly in 4-5-6 chevy but has 60-63 stuff from time to time give him a try...Vernski

Blue Heeler · 05-04-2013, 11:37 PM

I have a friend with a bunch of them and he will seperate, send me a pm and we will make it happen. what's going on Vernski?

Vernski · 05-05-2013, 11:48 AM

Quote:

Originally Posted by Blue Heeler

I have a friend with a bunch of them and he will seperate, send me a pm and we will make it happen. what's going on Vernski?

Yeah I can sum that up in two words, not much. I did get Frank painted though and if you missed it around the forums I could be coaxed to post a pic. I just don't want to hi-jack 63 C10's thread here...Vernski

K98AL · 05-06-2013, 08:45 AM

I've got a '62 plain cab. I bought SS sail trim, but don't have the sheet metal mounts for the rear. Can I just use sheet metal screws? I have a feeling that wouldn't be the same.....I've tried to find repro hardware, but not available?

forestb · 05-06-2013, 04:59 PM

I'm sorry if I sound stupid but what in the world is sail trim.

1963-4x4 · 05-06-2013, 05:04 PM

Quote:

Originally Posted by forestb

I'm sorry if I sound stupid but what in the world is sail trim.

They are the trim pieces that say Custom on the upper cab of the truck, behind the doors.

**rideblue00** · 05-07-2013, 12:15 PM

pic 1 is 64-66 Aluminum
pic 2 is 60-63 stainless

**The Rocknrod** · 10-29-2018, 09:27 AM

Quote:

Originally Posted by rideblue00

pic 1 is 64-66 Aluminum
pic 2 is 60-63 stainless

Look at the wing vent window on pic #2
Is that a 64-66 with a 60-63 trim installed?

**jayoldschool** · 10-29-2018, 11:26 AM

Yes, I believe so.

**The Rocknrod** · 10-29-2018, 04:47 PM

I didn't know that would work.

**nsb29** · 10-29-2018, 07:28 PM

It looks to me like the same truck 63 on one side 64 on the other LOL

05-04-2013, 01:34 PM	#1
WhippinSaw Registered User Join Date: Aug 2012 Location: Lisle Illinois Posts: 602	custom sail panel trim I want to replace my custom sail panel trim, lmc has stainless, but more expensive, classicparts has aluminum trim. Anyone have any input. (Quality, the way stainless would look, and how the aftermarket sail trim fits and where to buy.)

05-04-2013, 03:22 PM	#3
WhippinSaw Registered User Join Date: Aug 2012 Location: Lisle Illinois Posts: 602	Re: custom sail panel trim Thanks 1963c-10, didn't know they were stainless, my 63 passenger side is good so I will hunt for the drivers, its cheaper plus I know it will fit.

05-04-2013, 03:28 PM	#4
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: custom sail panel trim i see alot of singles pop up in the classifieds and on ebay from time to time. Posted via Mobile Device __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

05-04-2013, 11:04 PM	#5
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: custom sail panel trim Hi Whipsaw three is a parts wanted on this forum and parts for sale also. Then there is Tony Smith http://4-5-6chevytrucks.com/about-us.html Tony deals mostly in 4-5-6 chevy but has 60-63 stuff from time to time give him a try...Vernski

05-04-2013, 11:37 PM	#6
Blue Heeler Registered User Join Date: Dec 2010 Location: Venice, Ca. Posts: 314	Re: custom sail panel trim I have a friend with a bunch of them and he will seperate, send me a pm and we will make it happen. what's going on Vernski?

05-04-2013, 01:46 PM	#2
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: custom sail panel trim the 60-63 sail panels were ss, the 64-66 were aluminum. there are so many original sets available, i wouldn't buy aftermarket. Posted via Mobile Device __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

05-06-2013, 08:45 AM	#8
K98AL Registered User Join Date: Dec 2011 Location: Sapulpa, OK Posts: 187	Re: custom sail panel trim I've got a '62 plain cab. I bought SS sail trim, but don't have the sheet metal mounts for the rear. Can I just use sheet metal screws? I have a feeling that wouldn't be the same.....I've tried to find repro hardware, but not available?

05-06-2013, 04:59 PM	#9
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,584	Re: custom sail panel trim I'm sorry if I sound stupid but what in the world is sail trim.

05-07-2013, 12:15 PM	#11
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,854	Re: custom sail panel trim pic 1 is 64-66 Aluminum pic 2 is 60-63 stainless Attached Images

10-29-2018, 11:26 AM	#13
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,151	Re: custom sail panel trim Yes, I believe so.

10-29-2018, 04:47 PM	#14
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: custom sail panel trim I didn't know that would work. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-29-2018, 07:28 PM	#15
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: custom sail panel trim It looks to me like the same truck 63 on one side 64 on the other LOL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.