The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-20-2018, 10:19 AM   #1
JamieGallien
Registered User
 
JamieGallien's Avatar
 
Join Date: Apr 2013
Location: Athens, Al
Posts: 241
HELP! Can I grind this down?

I'm having header clearance issues. I need to know if I'm going to get into anything important if I grind what looks like excess casting block down? See the red circles. I do know the bottom part I have to leave enough meat for the tranny bolt to hold. Thanks for any responses.
Attached Images
 
__________________
1965 Chevy C10 SWB Step
(Family Restoration Project)
http://67-72chevytrucks.com/vboard/s....php?p=6043410
1972 Chevy C10 LWB Fleet
(factory auto/l6)
http://67-72chevytrucks.com/vboard/s...d.php?t=580342
JamieGallien is offline   Reply With Quote
Old 02-20-2018, 10:25 AM   #2
The Rocknrod
Moderator

 
The Rocknrod's Avatar
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
Re: HELP! Can I grind this down?

If it were me, I would. I mean it's not me but...Sure, what the heck.
The Rocknrod is offline   Reply With Quote
Old 02-20-2018, 10:27 AM   #3
JamieGallien
Registered User
 
JamieGallien's Avatar
 
Join Date: Apr 2013
Location: Athens, Al
Posts: 241
Re: HELP! Can I grind this down?

Quote:
Originally Posted by The Rocknrod View Post
If it were me, I would. I mean it's not me but...Sure, what the heck.
I'm planning to unless somebody says don't. They look like attachment points for the casting/moving machinery to me...
__________________
1965 Chevy C10 SWB Step
(Family Restoration Project)
http://67-72chevytrucks.com/vboard/s....php?p=6043410
1972 Chevy C10 LWB Fleet
(factory auto/l6)
http://67-72chevytrucks.com/vboard/s...d.php?t=580342
JamieGallien is offline   Reply With Quote
Old 02-20-2018, 12:44 PM   #4
raidmagic
Senior Member
 
raidmagic's Avatar
 
Join Date: Jan 2015
Location: Tampa, Fl.
Posts: 420
Re: HELP! Can I grind this down?

I cut that lower one off on mine.
raidmagic is offline   Reply With Quote
Old 02-24-2018, 10:28 AM   #5
rideblue00
Senior Member
 
rideblue00's Avatar
 
Join Date: Feb 2010
Location: Lambertville, MI
Posts: 1,852
Re: HELP! Can I grind this down?

Closer up pics needed please
rideblue00 is offline   Reply With Quote
Old 02-24-2018, 04:33 PM   #6
68gmsee
Active Member
 
68gmsee's Avatar
 
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
Re: HELP! Can I grind this down?

Question: What engine is it? LSx?

I've worked GM engines and overhauled a few but never really noticed or maybe never paid attention to the extension on the top.
__________________
68 GMC 250/3 speed Saginaw p/b p/s
69 Chevy 350/350 currently in pieces still lookin for a cab
06 Trailblazer
I just want a vehicle that I can work on, that won't talk to me, leave error msgs or keep track of how I drive...
68gmsee is offline   Reply With Quote
Old 02-24-2018, 09:39 PM   #7
CousinTone
Registered User
 
Join Date: Jul 2015
Location: Placentia, CA
Posts: 344
Re: HELP! Can I grind this down?

Go ahead and grind them down, leaving enough around the mounting point for the bellhousing. They're not anywhere near the water jacket or oil passages back there. IMO, appears to be casting locator blocks for automated processes. Grind slowly and I did the same on a build and was fine. But I didn't take them all the way down, just enough to clear what was needed.
CousinTone is offline   Reply With Quote
Old 02-25-2018, 08:56 AM   #8
homemade87
Registered User
 
Join Date: Apr 2010
Location: Guntersville Alabama
Posts: 1,073
Re: HELP! Can I grind this down?

I will have to look at mine , but looks like that lower boss is for the starter bolt . What year engine is it . The upper one should not be a problem to trim .
homemade87 is offline   Reply With Quote
Old 02-26-2018, 11:31 AM   #9
4x4k30
Registered User
 
4x4k30's Avatar
 
Join Date: Jun 2003
Location: ga
Posts: 630
Re: HELP! Can I grind this down?

Quote:
Originally Posted by homemade87 View Post
I will have to look at mine , but looks like that lower boss is for the starter bolt . What year engine is it . The upper one should not be a problem to trim .
I looked at my 6.0 that's sitting in the floor DO NOT GRIND THE SPOT WHERE THE STARTER BOLT GOES..the top spot you have marked it can be grinded some but I would for sure don't mess where the starter bolt goes. now my engine is different its a gen 3 but it should be the same the pic shown looks to a be gen4
__________________
4x4k30 if trouble was money i would have plenty
4x4k30 is offline   Reply With Quote
Old 02-26-2018, 12:19 PM   #10
JamieGallien
Registered User
 
JamieGallien's Avatar
 
Join Date: Apr 2013
Location: Athens, Al
Posts: 241
Re: HELP! Can I grind this down?

Quote:
Originally Posted by 4x4k30 View Post
I looked at my 6.0 that's sitting in the floor DO NOT GRIND THE SPOT WHERE THE STARTER BOLT GOES..the top spot you have marked it can be grinded some but I would for sure don't mess where the starter bolt goes. now my engine is different its a gen 3 but it should be the same the pic shown looks to a be gen4
Yeah the lower part has one of the starter bolts. Any grindin there will be minimal, just to take the corners off. I may have to dimple the header at that spot for clearance.

Thanks for the replies fellas!
__________________
1965 Chevy C10 SWB Step
(Family Restoration Project)
http://67-72chevytrucks.com/vboard/s....php?p=6043410
1972 Chevy C10 LWB Fleet
(factory auto/l6)
http://67-72chevytrucks.com/vboard/s...d.php?t=580342
JamieGallien is offline   Reply With Quote
Old 02-27-2018, 12:24 AM   #11
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: HELP! Can I grind this down?

I have to ask, what brand of headers are you using that has an interference in those areas? I would have thought by now that all of the LSx headers would fit properly.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 02-27-2018, 09:34 AM   #12
JamieGallien
Registered User
 
JamieGallien's Avatar
 
Join Date: Apr 2013
Location: Athens, Al
Posts: 241
Re: HELP! Can I grind this down?

Quote:
Originally Posted by Captainfab View Post
I have to ask, what brand of headers are you using that has an interference in those areas? I would have thought by now that all of the LSx headers would fit properly.
They are Chinese ebay headers. The reviews had comments about having to clearance the block or trans. I thought I got lucky when I test fit them, but with the body on couldn't see the interference.

You get what you pay for, as always, lol.

"Do they fit?"

"Crose enough."

LOL

http://67-72chevytrucks.com/vboard/s...5&postcount=55
__________________
1965 Chevy C10 SWB Step
(Family Restoration Project)
http://67-72chevytrucks.com/vboard/s....php?p=6043410
1972 Chevy C10 LWB Fleet
(factory auto/l6)
http://67-72chevytrucks.com/vboard/s...d.php?t=580342
JamieGallien is offline   Reply With Quote
Old 02-27-2018, 12:04 PM   #13
68gmsee
Active Member
 
68gmsee's Avatar
 
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
Re: HELP! Can I grind this down?

"You get what you pay for, as always, lol. "

Sometimes you gotta do what you have to do to get the truck running. I've been there.

I don't know if you saw my question about the year of the engine. I've never noticed the top extension before. Might help someone in the future.
__________________
68 GMC 250/3 speed Saginaw p/b p/s
69 Chevy 350/350 currently in pieces still lookin for a cab
06 Trailblazer
I just want a vehicle that I can work on, that won't talk to me, leave error msgs or keep track of how I drive...
68gmsee is offline   Reply With Quote
Old 02-27-2018, 12:07 PM   #14
JamieGallien
Registered User
 
JamieGallien's Avatar
 
Join Date: Apr 2013
Location: Athens, Al
Posts: 241
Re: HELP! Can I grind this down?

Quote:
Originally Posted by 68gmsee View Post
"You get what you pay for, as always, lol. "

Sometimes you gotta do what you have to do to get the truck running. I've been there.

I don't know if you saw my question about the year of the engine. I've never noticed the top extension before. Might help someone in the future.
I'm sorry 68gmsee, I did miss your question. The pic is just representative. I have a standard 2004 5.3 block. I have seen pics of some LS blocks that don't have the extensions though.
__________________
1965 Chevy C10 SWB Step
(Family Restoration Project)
http://67-72chevytrucks.com/vboard/s....php?p=6043410
1972 Chevy C10 LWB Fleet
(factory auto/l6)
http://67-72chevytrucks.com/vboard/s...d.php?t=580342
JamieGallien is offline   Reply With Quote
Old 02-27-2018, 06:21 PM   #15
mattfranklin
Senior Member
 
mattfranklin's Avatar
 
Join Date: Dec 2011
Location: Moraga, CA
Posts: 797
Re: HELP! Can I grind this down?

"Engine Masters" did a nice episode on headers and how much denting they can handle before you notice *any* power loss. Obviously you don't want to hammer it until it looks like garbage, but the exhaust system is fairly tolerant.

https://www.youtube.com/watch?v=azPKIjxmmdU
__________________
(Very) Slow-Going Build Thread: Stock 1970 Short Step with Stock 1970 LT-1

http://67-72chevytrucks.com/vboard/s...d.php?t=567340
mattfranklin is offline   Reply With Quote
Old 02-27-2018, 06:22 PM   #16
87Skier
Registered User
 
87Skier's Avatar
 
Join Date: Mar 2014
Location: Corvallis, OR
Posts: 711
Re: HELP! Can I grind this down?

Quote:
Originally Posted by JamieGallien View Post
Yeah the lower part has one of the starter bolts. Any grindin there will be minimal, just to take the corners off. I may have to dimple the header at that spot for clearance.

Thanks for the replies fellas!
I would beat the crap out of the headers before taking the grinder to that area to remove a significant amount of material. I would round the corners, but nothing more.

If you crack or damage the starter area, there isn't a good way to fix it, and without a starter your engine is basically a big boat anchor.
__________________
1972 GMC Jimmy Custom 4.8L (L20)/6L90E/NP205
1989 Chevy Suburban V2500 350/Turbo 400/4.11 gears
1996 Chevy Suburban K1500 350/4L60E
87Skier is offline   Reply With Quote
Old 03-05-2018, 10:35 PM   #17
HO455
Post Whore
 
HO455's Avatar
 
Join Date: Feb 2016
Location: Portland Oregon
Posts: 10,762
Re: HELP! Can I grind this down?

I agree with the previous posts. By all means dimple the headers. No loss of performance or header life. David Vizard talked about this years ago in one of his books as not being a problem.
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help.
RIP Bob Parks.
1967 Burban the WMB,1991 S(stink)-10 Blazer,1969 GTO, 1970 Javelin, 1952 F2 Ford 4X4, 29 Model A, 72 Firebird. 85 Alfa Romeo
If it breaks I didn't want it in the first place
The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377
HO455 is offline   Reply With Quote
Old 03-06-2018, 05:37 PM   #18
JamieGallien
Registered User
 
JamieGallien's Avatar
 
Join Date: Apr 2013
Location: Athens, Al
Posts: 241
Re: HELP! Can I grind this down?

Thanks for the ideas and help guys. I completely cut off the top block even with the surrounding area with no problem. That was the biggest problem I was having. (pic 1 and 2, right and leftside respectively)

Down at the starter bolt, I just cut off the sharp edge and rounded it off. Should be no compromise to strength as I didn't grind any thinner that the thinnest part that was already there. (Pic 3)

I'm still going to have to grind the collector rings to clear, but not much. Should be GOOD TO GO!
Attached Images
   
__________________
1965 Chevy C10 SWB Step
(Family Restoration Project)
http://67-72chevytrucks.com/vboard/s....php?p=6043410
1972 Chevy C10 LWB Fleet
(factory auto/l6)
http://67-72chevytrucks.com/vboard/s...d.php?t=580342
JamieGallien is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com