[Project] "Fnlow69" PART II - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DrtyJack75 · 02-23-2008, 07:17 AM

your a pimp....I would love to have those skillz!

Do you have another frame your taking your measurements from???

FnLow69 · 02-23-2008, 11:58 AM

LOL... i wish, ya i have my old frame. along with help from Abadsvt (josh), and porterbuilt (nathan) to make the frame.

thank for the replys guys progress soon!

**Yukon Jack** · 02-24-2008, 02:55 AM

Sure is impressive. Always amazes me to see this amount of skill.

FnLow69 · 02-27-2008, 09:24 AM

Finally an Update 2/25/2008

Got the dropmember tacked in and the control arms and rotors on. Need new air line fittings so i left the bags out for now.

Not the best photo but got both sides on.

Justin

Rokcrln · 02-27-2008, 09:39 AM

You really suck you know that! Now I am just that much further behind on my blazer build. I guess some day I should at least start it

Looks great, so did the top hat's of teh drop member interlock with the lower crossmember or did you just have a dimension to go by?

Kevin
LFD Inc.

FnLow69 · 02-27-2008, 09:59 AM

LOL.... ya nathan gave me some measurement for the location of the "hats". there is a gap underneath/ between them for welding.

abadsvt · 02-27-2008, 08:35 PM

Looking sweet! I love the way the dropmember looks in the raw frame. Have had a chance to put the cab on yet? Keep up the great work.

Josh

FnLow69 · 02-28-2008, 09:59 AM

Not yet, hoping to in a couple weeks. This weekend i'm going to start on the rear three link.
I got the axle out from under the old frame tonight, kinda wierd to see two bare frames...

redsled04 · 02-28-2008, 10:55 AM

Nice work its lookin good. Where in Washington do you live.

FnLow69 · 02-28-2008, 11:09 AM

I'm in Gig harbor

redsled04 · 02-28-2008, 08:06 PM

Man your out there aways.its nice over there though.

jkaylor68gmc · 02-28-2008, 08:37 PM

Looks awesome, I am subscribing.

6chevy9 · 03-01-2008, 01:16 PM

im with ya on that one jkaylor

bedsled71 · 03-03-2008, 07:57 AM

hey justin thanks for the help earlier.. i went and got the metal thismoring before work, ill be starting it in the morning!

shifty · 03-05-2008, 09:49 PM

Amazing. You guys really make me feel like a peon.

atxsteve1 · 03-06-2008, 12:30 PM

This frame is the most awesome thing i have ever seen....nice work. Your an artist...

FnLow69 · 03-26-2008, 07:59 AM

UPDATE 3/24/2008

WOW its been a month since an update.....

I got the upper and lower bars on and i started on the bag mounts/ tubing work heres some pictures of the progress so far. More tubing work to come, I need more steel........

*FormerMember* · 03-26-2008, 06:22 PM

looks like a rock crawler built it

BACKYARD88 · 03-26-2008, 08:28 PM

Looks good, nice work

Travis K · 03-27-2008, 08:46 AM

Your frame is looking awesome. I can't wait to try my hand at making my own frame. Any advise on figuring out the geomentry for all of the link bars? Also, what are you using to bend your plate and tubing?

bedsled71 · 03-27-2008, 07:23 PM

i like the round tube touch, im glad i did it on mine. makes it look nice.. kinda pain in the ass though huh?

SchreinerM · 03-27-2008, 09:06 PM

Looks awesome. Almost a shame to hide it with a cab and box.

FnLow69 · 03-28-2008, 07:29 AM

Thanks guys, wanted to be further along than this but life happens that way some times....

Quote:

Originally Posted by Travis K

Your frame is looking awesome. I can't wait to try my hand at making my own frame. Any advise on figuring out the geomentry for all of the link bars? Also, what are you using to bend your plate and tubing?

Make sure the parallel at ride height and get as much tri-angulation to the upper bars as you can with out them binding. I bought a cheap harbor frieght pipe bender seems to work on the thinker (3/16") wall tube.

Quote:

Originally Posted by bedsled71

i like the round tube touch, im glad i did it on mine. makes it look nice.. kinda pain in the ass though huh?

Ya but the tubing notcher i bought helped out a lot,no more using a grinder for it, but im not done yet so well see...

Quote:

Originally Posted by SchreinerM

Looks awesome. Almost a shame to hide it with a cab and box.

well there wont be any bed floor so you well see most of it, and there also want be a hood really either...

Justin

68laydout · 03-29-2008, 01:37 AM

Did you make your own link bars? What are the lengths used? Looks real good man!

Madmandav · 03-29-2008, 01:52 AM

That goes WAY beyond my skill level. Nice job.

02-23-2008, 07:17 AM	#51
DrtyJack75 Registered User Join Date: Feb 2008 Location: West Sacramento, CA Posts: 417	Re: [Project] "Fnlow69" PART II your a pimp....I would love to have those skillz! Do you have another frame your taking your measurements from???

02-23-2008, 11:58 AM	#52
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II LOL... i wish, ya i have my old frame. along with help from Abadsvt (josh), and porterbuilt (nathan) to make the frame. thank for the replys guys progress soon! __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

02-24-2008, 02:55 AM	#53
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: [Project] "Fnlow69" PART II Sure is impressive. Always amazes me to see this amount of skill. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-27-2008, 09:24 AM	#54
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II Finally an Update 2/25/2008 Got the dropmember tacked in and the control arms and rotors on. Need new air line fittings so i left the bags out for now. Not the best photo but got both sides on. Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

02-27-2008, 09:39 AM	#55
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: [Project] "Fnlow69" PART II You really suck you know that! Now I am just that much further behind on my blazer build. I guess some day I should at least start it Looks great, so did the top hat's of teh drop member interlock with the lower crossmember or did you just have a dimension to go by? Kevin LFD Inc.

02-27-2008, 09:59 AM	#56
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II LOL.... ya nathan gave me some measurement for the location of the "hats". there is a gap underneath/ between them for welding. __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

02-27-2008, 08:35 PM	#57
abadsvt Senior Member Join Date: Aug 2006 Location: Atascadero, CA Posts: 1,152	Re: [Project] "Fnlow69" PART II Looking sweet! I love the way the dropmember looks in the raw frame. Have had a chance to put the cab on yet? Keep up the great work. Josh __________________ (Project truck) 1970 C10 under complete transformation My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold

02-28-2008, 09:59 AM	#58
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II Not yet, hoping to in a couple weeks. This weekend i'm going to start on the rear three link. I got the axle out from under the old frame tonight, kinda wierd to see two bare frames... __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

02-28-2008, 10:55 AM	#59
redsled04 Registered User Join Date: Nov 2007 Location: Maple valley WA. Posts: 128	Re: [Project] "Fnlow69" PART II Nice work its lookin good. Where in Washington do you live.

02-28-2008, 11:09 AM	#60
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II I'm in Gig harbor __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

02-28-2008, 08:06 PM	#61
redsled04 Registered User Join Date: Nov 2007 Location: Maple valley WA. Posts: 128	Re: [Project] "Fnlow69" PART II Man your out there aways.its nice over there though.

02-28-2008, 08:37 PM	#62
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: [Project] "Fnlow69" PART II Looks awesome, I am subscribing. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

03-01-2008, 01:16 PM	#63
6chevy9 Registered User Join Date: Jul 2007 Location: redding CA Posts: 65	Re: [Project] "Fnlow69" PART II im with ya on that one jkaylor __________________ 70 c10 bagged chevy its a life style

03-03-2008, 07:57 AM	#64
bedsled71 Registered User Join Date: Feb 2007 Location: yuma arizona Posts: 448	Re: [Project] "Fnlow69" PART II hey justin thanks for the help earlier.. i went and got the metal thismoring before work, ill be starting it in the morning!

03-05-2008, 09:49 PM	#65
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: [Project] "Fnlow69" PART II Amazing. You guys really make me feel like a peon. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.



Register or Log In To remove these advertisements.

03-06-2008, 12:30 PM	#66
atxsteve1 Registered User Join Date: Feb 2008 Location: Austin, TX Posts: 11	Re: [Project] "Fnlow69" PART II This frame is the most awesome thing i have ever seen....nice work. Your an artist...

03-26-2008, 07:59 AM	#67
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II UPDATE 3/24/2008 WOW its been a month since an update..... I got the upper and lower bars on and i started on the bag mounts/ tubing work heres some pictures of the progress so far. More tubing work to come, I need more steel........ __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

03-26-2008, 06:22 PM	#68
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: [Project] "Fnlow69" PART II looks like a rock crawler built it

03-26-2008, 08:28 PM	#69
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: [Project] "Fnlow69" PART II Looks good, nice work __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

03-27-2008, 08:46 AM	#70
Travis K Registered User Join Date: Mar 2007 Location: Bismarck, ND Posts: 81	Re: [Project] "Fnlow69" PART II Your frame is looking awesome. I can't wait to try my hand at making my own frame. Any advise on figuring out the geomentry for all of the link bars? Also, what are you using to bend your plate and tubing?

03-27-2008, 07:23 PM	#71
bedsled71 Registered User Join Date: Feb 2007 Location: yuma arizona Posts: 448	Re: [Project] "Fnlow69" PART II i like the round tube touch, im glad i did it on mine. makes it look nice.. kinda pain in the ass though huh?

03-27-2008, 09:06 PM	#72
SchreinerM Registered User Join Date: Oct 2006 Location: Oshkosh, WI Posts: 101	Re: [Project] "Fnlow69" PART II Looks awesome. Almost a shame to hide it with a cab and box.

03-29-2008, 01:37 AM	#74
68laydout Junior Member Join Date: Jun 2006 Location: Frisco Tx Posts: 311	Re: [Project] "Fnlow69" PART II Did you make your own link bars? What are the lengths used? Looks real good man!

03-29-2008, 01:52 AM	#75
Madmandav Madmandav Join Date: Feb 2008 Location: Owensboro Ky Posts: 89	Re: [Project] "Fnlow69" PART II That goes WAY beyond my skill level. Nice job. __________________ I must be crazy, that's what the voices in my head keep telling me. Project FROSTBITE http://www.67-72chevytrucks.com/vboa...d.php?t=280249 http://www.67-72chevytrucks.com/vboa...d.php?t=287407 '72 Chevy longbed '70 Chevy longbed (million pieces)(FROSTBITE) '79 Monte Carlo '07 Chevy HHR '00 Yamaha V-star '05 Monte Carlo SS Supercharged

Register or Log In To remove these advertisements.