Need help sorting ls stand alone harness

[bh86]

I hope this is the right section for this but I bought this ls1 setup from a guy running it in a third gen camaro. The harness was already done but had some of the connections cut when removed. I'm a lil stumped and looking for some direction since I'm not really an expert. I can get by, I've built my own harnesses in the past but back tracking and understanding the way they setup these relays isn't my area of expertise. If anyone can help me understand which relay us doing which that would be amazing

Relay 1
White 86 runs to red pin 9 fuel pump relay control
Yellow 87 runs to spare cut yellow wire that's hanging down
Blue 30 runs to fuse two green
Black 85 runs to-
red pin 24 and tps sensor pin c
blue 60 BLK 452 Low Reference TPS Pin “B”

Relay 2
White 86 runs to fuse 1 green
Yellow 87 runs to fuse 1 green
Blue 30 runs to spare cut blue wire that's hanging down (ignition on 12+?)
Black 85 runs to green fuse 1

In the attached pics fuse 1 is the yellow to the right and fuse 4 is the the green furthest to the left. The two orange writes that are cut and hanging feed the fuse panel.