The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1973-1987 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-23-2020, 08:50 PM   #1
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
‘89 V(K)30 cab and chassis part out.

See post#11 for updated list of smaller parts,prices and availability. See post 20 for inside floor pictures, will trade doors straight across for good condition srw front Dana 60 hubs.
Chassis and drivetrain are not for sale. The cab is Bill of sale only, no title. The body on this truck is in very good condition, straight and rust free. The roof does have a small hole that’s been plugged likely for an old cb antenna or similar as seen in the pictures. I’d like to sell the cab and doors together and the front clip together for now. The TBI 454 is not complete and was told it’s no good. I will sell parts off of it.

For the bare cab/complete doors and complete front clip together-$3K delivered along the route mentioned below. In my opinion that’s a bargain vs. paying a body shop for rust repairs and straightening, or fitting aftermarket parts. If Im out of line on my prices let me know. I will be heading to northern Virginia in November for thanksgiving and am willing to haul the cab and clip out there. I could easily meet anywhere on I40 between Albuquerque and Knoxville, or between Knoxville and Winchester VA on I81.
Pictures to follow.

These are all GM body parts and no patches in any of the metal.
Cab,doors,clip: $3,000 (1k for the clip, 1k for the Cab, 500 ea, for the complete doors)
Clip alone complete with core support, grill and inner/outer fenders etc.$1,000
Cab/complete assembled doors: $2,000

I will certainly entertain offers/trades/partial trades. 69-‘72 tow hooks are a good place to start. If picking up here in New Mexico I will knock some money off of the above pricing.
More pictures and prices of individual cab/interior parts to come as I start tearing into it more.
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic

Last edited by 57taskforce; Today at 12:12 AM.
57taskforce is offline   Reply With Quote
Old 09-23-2020, 08:52 PM   #2
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Pictures
Attached Images
     
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic

Last edited by 57taskforce; 09-23-2020 at 09:01 PM.
57taskforce is offline   Reply With Quote
Old 09-23-2020, 08:53 PM   #3
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Pics
Attached Images
     

Last edited by 57taskforce; 09-23-2020 at 09:13 PM.
57taskforce is offline   Reply With Quote
Old 09-23-2020, 08:54 PM   #4
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Here’s a few of the two dents it has and also an interior and spid shot.
Attached Images
     
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic

Last edited by 57taskforce; 09-23-2020 at 09:17 PM.
57taskforce is offline   Reply With Quote
Old 09-23-2020, 09:34 PM   #5
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,204
Re: ‘89 V(K)30 cab and chassis part out.

Glad you started parting it out sooner. PM me on the pedals when you get time.
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote
Old 09-24-2020, 12:01 AM   #6
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Let me get it pulled this weekend and I’ll get a price.
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is offline   Reply With Quote
Old 09-24-2020, 12:04 AM   #7
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,204
Re: ‘89 V(K)30 cab and chassis part out.

Thank you I appreciate it. They're not too bad to get out once the steering columns out of the way
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote
Old 09-25-2020, 08:06 AM   #8
TBohne
Registered User
 
Join Date: Feb 2016
Location: Anderson, Texas
Posts: 302
Re: ‘89 V(K)30 cab and chassis part out.

Grille, headlight doors and front signal lenses shipped to 77830?
TBohne is offline   Reply With Quote
Old 09-25-2020, 10:11 AM   #9
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Not selling individual parts from the clip at this time. If it comes to that you can be first in line for those parts.
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic

Last edited by 57taskforce; 09-25-2020 at 10:45 PM.
57taskforce is offline   Reply With Quote
Old 09-25-2020, 09:22 PM   #10
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Brake/clutch pedals for 1774btcrew. How does 100+ shipping sound?
Attached Images
  
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic

Last edited by 57taskforce; 09-26-2020 at 04:28 PM.
57taskforce is offline   Reply With Quote
Old 09-25-2020, 10:19 PM   #11
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Here’s a list of parts I’ve got pulled and ready to go, pictures available.
Will trade doors straight across for srw front Dana 60 hubs

4 speed Cluster cleaned up pretty nice. $50+shipping sold local
OE Gauge bezel 1 small crack, 2 extra holes for toggle switches and wear on the chrome gauge surrounds $40+shipping
OE Headlight switch with rod and knob $20 shipped
OE Delco cassette radio operating condition unknown $30+shipping sold local
4 speed Non tilt Steering column tight bearings no key $50 sold local
Steering intermediate shaft 40+ shipping
Heater only controls; good levers with cables $30 shipped
Steering column mounting parts, inside and out with hardware $40 shipped
Dark blue Cowl floor vents nice shape missing some hardware, green overspray will come off easily with a little work. Missing driver side knob/linkage $50+shipping for the set
Parking brake pedal assembly $40 shipped
Np 205 shifter boot and ring, boot in nice shape just needs cleaning. Ring is straight but could use paint. Hardware included. $50 shipped
Gas pedal assembly with cable $25 shipped
Door sill panels, nice shape will clean before shipping. $35 shipped
Blue door panels no extra holes or cracks. Nice driver shape $100/set+shipping
Complete set of dark blue shoulder/lap belts, need a good cleaning but seem to function fine. $50/set+shipping sold to TKCR
Ash tray and mounting bracket $40shipped
Clutch/brake pedals $100 sold to 1774btcrew
Clutch reservoir $20 sold to 1774btcrew
Sm465 shifter boot/ring $15 sold to 1774btcrew
Engine $150 sold local
More to come soon.
Attached Images
   
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic

Last edited by 57taskforce; Today at 12:14 AM.
57taskforce is offline   Reply With Quote
Old 09-26-2020, 06:08 PM   #12
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,204
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 57taskforce View Post
Brake/clutch pedals for 1774btcrew. How does 100+ shipping sound?
That sounds great to me. I will take it. How much for the shifter boot, maybe shifter if you will separate. and the resevoir with bracket for the clutch
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote
Old 09-26-2020, 06:09 PM   #13
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,204
Re: ‘89 V(K)30 cab and chassis part out.

I will also send you another PM. Do you have the other rod for the pedal assembly that mounts the clutch master cylinder?
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote
Old 09-26-2020, 06:39 PM   #14
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 1774btcrew View Post
I will also send you another PM. Do you have the other rod for the pedal assembly that mounts the clutch master cylinder?
Yes sir I do. I took it off the truck but hadn’t attached it back to the pedal assembly when I took the picture. The pedal assembly is complete with all hardware and braces etc.
I don’t want to separate the transmission and shifter at this time, maybe in the future. I’d go another 50 for the boot, ring, hardware, and clutch reservoir/bracket, combined with the shipping on the pedals.
The hose on the reservoir is rotted out FYI. The boot is in what I’d call driver shape the inner boot is torn and it has slight green overspray on it that I think will clean up with some elbow grease. It seemed to still seal the cab but it’s not perfect by any means.
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic

Last edited by 57taskforce; 09-26-2020 at 11:43 PM.
57taskforce is offline   Reply With Quote
Old 09-26-2020, 07:07 PM   #15
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,204
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 44th Miss Inf View Post
If he doesn’t, the outside brace rod PN is 15521991. It shows discontinued but I just picked one up a month or so ago
Awesome! Do you know if you can get the return spring too? Where did you buy your rod from?
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote
Old 09-27-2020, 04:36 PM   #16
44th Miss Inf
Registered User
 
Join Date: Sep 2002
Location: Liberty, Mississippi
Posts: 494
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 1774btcrew View Post
Awesome! Do you know if you can get the return spring too? Where did you buy your rod from?
For the pedal or the fork? I probably have PNs for both, along with most of the parts for the hydraulic clutch system
44th Miss Inf is offline   Reply With Quote
Old 09-27-2020, 05:24 PM   #17
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,204
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 44th Miss Inf View Post
For the pedal or the fork? I probably have PNs for both, along with most of the parts for the hydraulic clutch system
For the pedal. I don't think I'll be able to find a spring anyway. But they do tend to break. I found the master cylinder braces so I appreciate the part number.
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote
Old 09-28-2020, 01:31 AM   #18
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,204
Re: ‘89 V(K)30 cab and chassis part out.

I didn't see you updated the price. I will take them for that
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote
Old 09-29-2020, 06:55 PM   #19
1774btcrew
Senior Member
 
1774btcrew's Avatar
 
Join Date: Jun 2009
Location: Phoenix AZ
Posts: 4,204
Re: ‘89 V(K)30 cab and chassis part out.

Quote:
Originally Posted by 57taskforce View Post
Clutch/brake pedals,4 speed shifter boot, clutch reservoir sold to 1774btcrew- Thanks!
Thanks for the great parts. Looking forward to receiving them!
__________________
AZPartsLocators on Instagram

1972 Cheyenne Super Short Bed big block "Blackie"
1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog"
1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.
1774btcrew is offline   Reply With Quote
Old 10-09-2020, 04:09 PM   #20
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Here’s some pictures of the inside of the cab floor. Really nice all original metal with no signs of rust.
Attached Images
  
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic

Last edited by 57taskforce; 10-09-2020 at 04:15 PM.
57taskforce is offline   Reply With Quote
Old 10-11-2020, 09:08 PM   #21
Eagle9502
Senior Member
 
Join Date: Dec 2015
Location: Brooklet, Georgia
Posts: 698
Re: ‘89 V(K)30 cab and chassis part out.

Are the motor mounts and the braces that go from the motor mounts to the torque converter dust cover available?
Eagle9502 is offline   Reply With Quote
Old 10-12-2020, 08:32 AM   #22
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

The braces are long gone, I may sell the mounts though, I’m hoping to have the engine out of it this afternoon. If they are in good shape I’ll post them up here.
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is offline   Reply With Quote
Old 10-25-2020, 11:50 PM   #23
57taskforce
All about them K’s

 
57taskforce's Avatar
 
Join Date: Jun 2014
Location: New Mexico
Posts: 3,375
Re: ‘89 V(K)30 cab and chassis part out.

Bump for nice sheet metal for you east coast guys/gals. Still have some parts left of it.
__________________
'57 3100 350/700r4 4” lift 35x12.5's
'72 K20 Cheyenne 350/SM465 557 paint http://67-72chevytrucks.com/vboard/s...d.php?t=662879
‘69 K10 SWB 305/sm465/205 4” lift 33x12.5’s awaiting vortec 350 swap and light restoration http://67-72chevytrucks.com/vboard/s...d.php?t=805206
'98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's
‘10 Camaro 2SS/RS Aqua Blue Metallic
57taskforce is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com