06-05-2018, 10:29 AM | #1 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Horn contact order
Can someone show me the right order in which these parts are installed onto the steering wheel?
Especially the tapered 3 hole plate thing...
__________________
1997 GMC Sierra Ext 1965 Mustang |
06-05-2018, 02:11 PM | #2 |
Registered User
Join Date: Dec 2014
Location: Jacksonville
Posts: 75
|
Re: Horn contact order
Here is a pic that I took when I was about to replace the steering wheel on my '86. It's been awhile since I did it but it may be safe to "assume" (LOL) that the first piece from the left in your picture is on the bottom
__________________
Everything that can be counted does not necessarily counts; everything that counts cannot necessarily be counted--Albert Einstein |
06-10-2018, 10:58 AM | #3 |
Registered User
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 750
|
Re: Horn contact order
LEFT to right spring contact is up side down, then the horn holder, plastic spacer( DO NOT OVER TIGHTEN ) blue lock tight can be used half drop screws . then horn cover
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change. |
06-10-2018, 11:03 AM | #4 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: Horn contact order
Thank you.....works.....
__________________
1997 GMC Sierra Ext 1965 Mustang |
Bookmarks |
|
|