1968 Gmc K1500 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

griesel72 · 03-09-2008, 04:52 AM

i have found a 1968 GMC 4X4 half ton with the 305 v6 motor. It is a rather rough farm truck, but doesn't have that bad of rust (slight rockers and mounts, corners ok) It hasn't run in at least 2 years, but was running when parked , the same old story. It has a 4 speed and had a wood bed that is now covered by a sheet of treadplate. The interior is ok except for the seat. the windshield is cracked totally.

Do you think a truck like this is worth 700 bucks i attached an old picture (i've been stalking it for a while now)

thanks
David

*1972Ryan* · 03-09-2008, 07:21 AM

I think it is worth it.

**jerry moss** · 03-09-2008, 07:48 PM

oh yeah, i'd buy it for 700 bucks.

68,69 K20 · 03-10-2008, 01:52 AM

Yep, that's what I paid for my 69 K20, and it looks to be in the same condition.

griesel72 · 03-18-2008, 10:17 PM

anyone else want to chime in, i am going to look at it the middle of this week

thanks
DAvid

72freak · 03-18-2008, 10:29 PM

yep..........worth it...unless the frame is shot

griesel72 · 03-18-2008, 10:34 PM

any idea what transfer case it should have? By the frame being shot, i just check by the steering box is??

thanks
David

1969k10stepside · 03-18-2008, 11:00 PM

It should be a Rockwell T221 t-case.I say the truck is worth that price.

streetstar · 03-20-2008, 09:27 AM

4-by frame, salvageable cab and 68 front end -- hell yes that is worth it.

There is a dude on here (Joesjunk i think) that specializes in these.--- that is , finds a beat up 4-by and lowers a cherry 2-by body on it

griesel72 · 03-20-2008, 04:49 PM

shhh, don't tell him about this one, i don't want him to get the jump on me

If it was a 1971-72, i'd be all over it, but i just don't know the desirability of the 1968 4X4 parts with the 305 v6 motor, but it is a 4X4 and it is our body style, and i do have an extra small block laying around...

thanks
David

Huck · 03-25-2008, 03:38 AM

The 305 doesn't have much value to most but if the cab, front clip, frame is decent, that is where the value is. Huck

03-09-2008, 04:52 AM	#1
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	1968 Gmc K1500 i have found a 1968 GMC 4X4 half ton with the 305 v6 motor. It is a rather rough farm truck, but doesn't have that bad of rust (slight rockers and mounts, corners ok) It hasn't run in at least 2 years, but was running when parked , the same old story. It has a 4 speed and had a wood bed that is now covered by a sheet of treadplate. The interior is ok except for the seat. the windshield is cracked totally. Do you think a truck like this is worth 700 bucks i attached an old picture (i've been stalking it for a while now) thanks David Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-09-2008, 07:21 AM	#2
1972Ryan Account Suspended Join Date: Mar 2006 Location: Weaverville, NC Posts: 718	Re: 1968 Gmc K1500 I think it is worth it.

03-09-2008, 07:48 PM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,741	Re: 1968 Gmc K1500 oh yeah, i'd buy it for 700 bucks. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-10-2008, 01:52 AM	#4
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: 1968 Gmc K1500 Yep, that's what I paid for my 69 K20, and it looks to be in the same condition. __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

03-18-2008, 10:17 PM	#5
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Re: 1968 Gmc K1500 anyone else want to chime in, i am going to look at it the middle of this week thanks DAvid __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-18-2008, 10:29 PM	#6
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1968 Gmc K1500 yep..........worth it...unless the frame is shot __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere! Last edited by 72freak; 03-18-2008 at 10:30 PM.

03-18-2008, 10:34 PM	#7
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Re: 1968 Gmc K1500 any idea what transfer case it should have? By the frame being shot, i just check by the steering box is?? thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-18-2008, 11:00 PM	#8
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: 1968 Gmc K1500 It should be a Rockwell T221 t-case.I say the truck is worth that price. Last edited by 1969k10stepside; 03-18-2008 at 11:01 PM.

03-20-2008, 09:27 AM	#9
streetstar Registered User Join Date: May 2007 Location: Moore, Oklahoma Posts: 2,396	Re: 1968 Gmc K1500 4-by frame, salvageable cab and 68 front end -- hell yes that is worth it. There is a dude on here (Joesjunk i think) that specializes in these.--- that is , finds a beat up 4-by and lowers a cherry 2-by body on it __________________ Are you retired too? Nonsense! I'm in my prime

03-20-2008, 04:49 PM	#10
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Re: 1968 Gmc K1500 shhh, don't tell him about this one, i don't want him to get the jump on me If it was a 1971-72, i'd be all over it, but i just don't know the desirability of the 1968 4X4 parts with the 305 v6 motor, but it is a 4X4 and it is our body style, and i do have an extra small block laying around... thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-25-2008, 03:38 AM	#11
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: 1968 Gmc K1500 The 305 doesn't have much value to most but if the cab, front clip, frame is decent, that is where the value is. Huck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.