The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-20-2005, 11:22 PM   #1
OldSuperSport
Registered User
 
OldSuperSport's Avatar
 
Join Date: Apr 2005
Location: Akron, Ohio
Posts: 13
Is my ALDL 160 baud or 8192, connector looks like this

My ALDL connector does not look like any that the fine websites show. Its a 95 Chevy 5.7L 2WD Siverado, std. truck. My ALDL has 12 pin holes but only 6 pins inserted. Per normal layout 2 rows, ABCDEF and GHJKLM and I have pins at ABGHJM.

F E D C B A
- - - - x x
x x x - - x
G H J K L M

Do I have a 160 baud system or a 8191baud pre OBDII system. I am tryign to get WinALDL to talk to my computer. It supposed to go to pins A ground and pin E data. I dont have a pin E.

Thanks
OldSuperSport is offline   Reply With Quote
Old 04-21-2005, 11:38 AM   #2
Tink
Registered User
 
Tink's Avatar
 
Join Date: May 2002
Location: VA
Posts: 1,337
I thought the 16 pin ALDL was what they switched to when they changed to OBD 1.5... If you have the 12 pin ALDL I would think it is OBD 1...

Here is a pic I found describing how the 12 pin should be populated:



I would assume you could use M
__________________
69 Chevy C10

88 Sierra

02 2500 Suburban
And too many S10s to list!

Last edited by Tink; 04-21-2005 at 11:39 AM.
Tink is offline   Reply With Quote
Old 04-21-2005, 12:23 PM   #3
OldSuperSport
Registered User
 
OldSuperSport's Avatar
 
Join Date: Apr 2005
Location: Akron, Ohio
Posts: 13
My connector pins are not like the diagram. I tried to hook to A and M but get no data. What I dont know is this 160 or 8192 baud, because WinALDL wont do 8192, and that may be why I cant see data. Tonight I'm going to break out the old oscilloscope and look for a pulse train on all the pins and determine the frequency. My DMM told me the frequentcy was 1200 hz but I think the DMM was confused by the waveform or something.

The truck has the towing package, dual radiators, oil cooler, 4.11 rearend, I dont know the transmission model, or how to find out what it is. For the software you need to know what ECM you have and thats related to engine "vin letter"??? and transmission 4L60E or 4L80E. What does Vin K or Vin P, Vin J refer to?

Thanks for the reply
OldSuperSport is offline   Reply With Quote
Old 04-21-2005, 04:45 PM   #4
Kevin45
Registered User
 
Kevin45's Avatar
 
Join Date: Oct 2004
Location: Urbana, Ohio
Posts: 591
Check this on NastyZ28's site. The man is a wealth of info on Chebbies. It is how to ID your trans. http://www.nastyz28.com/transid.html

Kevin
__________________
'93 Silverado Reg. Cab Shortbox
.060 over 350 Quick and fun!!!
Kevin45 is offline   Reply With Quote
Old 04-21-2005, 11:44 PM   #5
OldSuperSport
Registered User
 
OldSuperSport's Avatar
 
Join Date: Apr 2005
Location: Akron, Ohio
Posts: 13
Thumbs up

Thanks, that should help a lot.
OldSuperSport is offline   Reply With Quote
Old 04-22-2005, 10:16 AM   #6
99-2door
Registered User
 
99-2door's Avatar
 
Join Date: Oct 2003
Location: Broken Bow, OK
Posts: 1,385
a 95 is not 160, 94-up trucks 1/2 ton are not. No 4L80e trucks are.
You need the Datamaster version for your truck.
__________________
95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80
2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc.
2003 Tahoe Z71 Silverado front clip
99-2door is offline   Reply With Quote
Old 04-22-2005, 04:12 PM   #7
bubba2
Registered User
 
Join Date: Jan 2005
Location: Santa Barbara, CA
Posts: 69
'94-'95 Automatics use a PCM, and are 8192 BAUD using pin-M of the ALDL. Manual trans for those years (1/2-ton) use an ECM and are 160 BAUD, and use pin-E of the ALDL. Some heavy duty trucks with manual trans also use the PCM, which is 8192 BAUD.
bubba2 is offline   Reply With Quote
Old 04-22-2005, 10:58 PM   #8
OldSuperSport
Registered User
 
OldSuperSport's Avatar
 
Join Date: Apr 2005
Location: Akron, Ohio
Posts: 13
I learned about RPO codes and I found I was wrong about some things. I have the following:
L05 code=5.7L TBI
GT4 code=3.73 diff
M30 code =4L60E trans
NA1,NA5 code= <8500 GVWR, Federal

I'm going to pullput the computer and look for the PCM id number, I think its 1619747, but I'll find out. I'm sure of the 8192 now, I got 2 Max232 chips out of old instruments at the plant today, so i'm going to build up an interface

Thanks
OldSuperSport is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com