69 Camaro Gas Tank Install - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FL71C10 · 10-05-2010, 01:49 PM

Nice build and info, guys. Any reason this wouldn't work on a stepside?

67Slider · 10-05-2010, 05:28 PM

Mine is a stepside. Works fine.

madmopar · 10-05-2010, 05:31 PM

Cool idea - i like the license plate fill a lot better too...

I'm currently doing a similar install of a 68 roadrunner tank. Its a longer narrow tank (would fit between the rails), wheras the camaro tank is wider. It might not work for shortbeds though, as it is longer. I'm curious to see yours (and mine!) with the bed back on.

I'm going to run into a problem with my sending unit being wrong though (73-10 ohms) dodge versus chevy (0-90)... I'll have to deal with that later - modify the sending unit or aftermarket gauge...

GMCBubba · 10-29-2010, 10:25 AM

i'm assuming that this type of gas tank relocation would not allow the use of a trailer hitch like this (http://sitepro12.sitepro.com/masterl..._13028_INS.pdf). what do you think?

swamp rat · 10-29-2010, 07:27 PM

Quote:

Originally Posted by GMCBubba

i'm assuming that this type of gas tank relocation would not allow the use of a trailer hitch like this (http://sitepro12.sitepro.com/masterl..._13028_INS.pdf). what do you think?

Any tank would have to fit between the rails for it to work with a hitch.

67Slider · 01-02-2011, 07:18 PM

Here are a couple of pics with the bed bolted in. No clearance issues.

[IMG]

[/IMG]

[IMG]

[/IMG]

sjarrett71 · 01-02-2011, 07:28 PM

What is the capacity of the camaro tank?

67Slider · 01-02-2011, 07:30 PM

18 Gallons

sjarrett71 · 01-02-2011, 07:31 PM

Quote:

Originally Posted by 67Slider

18 Gallons

Thanks. I tried to get back to my post and edit it but you answered too quickly. I went back and read the first post and said "DOH!!"

stepstep67 · 01-05-2011, 01:55 AM

whats up 67slider i actually have an el camino bumper do u think the camaro gas tank wud still wrk?

67Slider · 01-05-2011, 11:19 AM

I would think so. You would just need to do a good mock up to figure out how much of a spacer you need. That is the key to making it work.
Posted via Mobile Device

Critter · 01-05-2011, 12:09 PM

The only thing I might do different is the license plate door. It looks like you have the spring loaded one that when you let go would pop back up. Some models have a break-over point so that once opened they stay in that position until you nudge them back closed. I forget the exact model of car but I pulled a couple on my last junk yard trip. Might make filling up a little easier for you.

67Slider · 01-05-2011, 12:46 PM

I totally agree. If you remember the model/year where you picked up the license plate holder that stays open pass it on. I would change mine out too. Looks like I may be spending an afternoon at the wrecking yard!
Posted via Mobile Device

Critter · 01-05-2011, 06:02 PM

If I remember right they were from a mid to late 80s Caprice, Pontiac Parisienne, Olds Delta 88, etc. I am positive they were from GM sedans at very least. Here are some pics. Notice how the hinge breaks over and stays in place. They could be mounted up or down. I plan to use mine for hidden hitch purposes. Incidentally, these pics are of the backside, the license plate side is face down.

67Slider · 01-05-2011, 06:45 PM

I'm down for one of these. I am going to see if I can find one. I mentioned to one of the other guys that the hinged door flips up and kind of gets in the way. This would certainly fix that issue.

Critter · 01-05-2011, 07:25 PM

Glad I could help. If you do find one report back and confirm what model it came from. That way the rest of the world can know from now on.

tolly4503 · 01-06-2011, 01:16 PM

I had a '90 Cadillac Fleetwood brougham, the fullsize caddy. it had the flip down plate holder that held itself down. They made those cars til '92.

c10/72 · 01-06-2011, 01:52 PM

That is pretty slick...I wish I had seen this thread before I did the conversion on my 72 short wide...looks great.

Hubscrub · 01-06-2011, 06:28 PM

this really has me thinking about relocating my tank i'm happy with it in the cab just wish i had the behind the seat room for storage. I'm not a big fan of the other ways

Valhalla · 01-06-2011, 06:57 PM

Great thread I am thinking about this over the $500 aluminum ones that mount in the bed.

stepstep67 · 01-07-2011, 01:27 AM

Quote:

Originally Posted by 67Slider

I would think so. You would just need to do a good mock up to figure out how much of a spacer you need. That is the key to making it work.
Posted via Mobile Device

thanx so it wud probably be slightjly difrent because of the diferent bumper. you use the 2by3 metal tubing right?

67Slider · 01-07-2011, 08:07 AM

Yes. I used wood blocks to mock it up in 1 inch increments until I found the right height for my application.

67Slider · 01-07-2011, 09:09 PM

Ok Guys. I went to the yard today and picked up a new license plate holder. It came off a 92 Caprice (old cop car). Works awesome. Thanks for the heads up on this one. Here are some pics and a shot of the tank from up my driveway and from the side.
[IMG]

[/IMG]
[IMG]

[/IMG]

[IMG]

[/IMG]

Critter · 01-07-2011, 11:09 PM

Quote:

Originally Posted by 67Slider

...It came off a 92 Caprice (old cop car). Works awesome. Thanks for the heads up on this one.

Well I was right about the model of car but wrong on the year model. Glad it worked out for you. Looks like the tank swap in general turned our very nice!

Kidd-7 · 01-07-2011, 11:39 PM

Any idea on using this setup on a chrome bumper? I'd hate to fork over the $$ for chrome and then cut a hole in it.

10-05-2010, 01:49 PM	#26
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: 69 Camaro Gas Tank Install Nice build and info, guys. Any reason this wouldn't work on a stepside? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

10-05-2010, 05:28 PM	#27
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: 69 Camaro Gas Tank Install Mine is a stepside. Works fine. __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

10-05-2010, 05:31 PM	#28
madmopar This guy has got to be stopped Join Date: Jul 2010 Location: Frankenstein, MO Posts: 138	Re: 69 Camaro Gas Tank Install Cool idea - i like the license plate fill a lot better too... I'm currently doing a similar install of a 68 roadrunner tank. Its a longer narrow tank (would fit between the rails), wheras the camaro tank is wider. It might not work for shortbeds though, as it is longer. I'm curious to see yours (and mine!) with the bed back on. I'm going to run into a problem with my sending unit being wrong though (73-10 ohms) dodge versus chevy (0-90)... I'll have to deal with that later - modify the sending unit or aftermarket gauge... __________________ J P Evers 1970 4x4 LWB project: http://67-72chevytrucks.com/vboard/s...d.php?t=415134

10-29-2010, 10:25 AM	#29
GMCBubba Registered User Join Date: Oct 2006 Location: Simpsonville, SC Posts: 255	Re: 69 Camaro Gas Tank Install i'm assuming that this type of gas tank relocation would not allow the use of a trailer hitch like this (http://sitepro12.sitepro.com/masterl..._13028_INS.pdf). what do you think? __________________ 1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration.

01-02-2011, 07:18 PM	#31
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: 69 Camaro Gas Tank Install Here are a couple of pics with the bed bolted in. No clearance issues. [IMG][/IMG] [IMG][/IMG] __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

01-02-2011, 07:28 PM	#32
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: 69 Camaro Gas Tank Install What is the capacity of the camaro tank? __________________ -Scott-

01-02-2011, 07:30 PM	#33
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: 69 Camaro Gas Tank Install 18 Gallons __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

01-05-2011, 01:55 AM	#35
stepstep67 Registered User Join Date: Dec 2010 Location: longmont colorado Posts: 14	Re: 69 Camaro Gas Tank Install whats up 67slider i actually have an el camino bumper do u think the camaro gas tank wud still wrk?

01-05-2011, 11:19 AM	#36
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: 69 Camaro Gas Tank Install I would think so. You would just need to do a good mock up to figure out how much of a spacer you need. That is the key to making it work. Posted via Mobile Device __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

01-05-2011, 12:09 PM	#37
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: 69 Camaro Gas Tank Install The only thing I might do different is the license plate door. It looks like you have the spring loaded one that when you let go would pop back up. Some models have a break-over point so that once opened they stay in that position until you nudge them back closed. I forget the exact model of car but I pulled a couple on my last junk yard trip. Might make filling up a little easier for you. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

01-05-2011, 12:46 PM	#38
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: 69 Camaro Gas Tank Install I totally agree. If you remember the model/year where you picked up the license plate holder that stays open pass it on. I would change mine out too. Looks like I may be spending an afternoon at the wrecking yard! Posted via Mobile Device __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

01-05-2011, 06:02 PM	#39
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: 69 Camaro Gas Tank Install If I remember right they were from a mid to late 80s Caprice, Pontiac Parisienne, Olds Delta 88, etc. I am positive they were from GM sedans at very least. Here are some pics. Notice how the hinge breaks over and stays in place. They could be mounted up or down. I plan to use mine for hidden hitch purposes. Incidentally, these pics are of the backside, the license plate side is face down. Attached Images __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

01-05-2011, 06:45 PM	#40
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: 69 Camaro Gas Tank Install I'm down for one of these. I am going to see if I can find one. I mentioned to one of the other guys that the hinged door flips up and kind of gets in the way. This would certainly fix that issue. __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

01-05-2011, 07:25 PM	#41
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: 69 Camaro Gas Tank Install Glad I could help. If you do find one report back and confirm what model it came from. That way the rest of the world can know from now on. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

01-06-2011, 01:16 PM	#42
tolly4503 Registered User Join Date: Jun 2010 Location: Columbiana, Ohio Posts: 93	Re: 69 Camaro Gas Tank Install I had a '90 Cadillac Fleetwood brougham, the fullsize caddy. it had the flip down plate holder that held itself down. They made those cars til '92.



Register or Log In To remove these advertisements.

01-06-2011, 01:52 PM	#43
c10/72 Registered User Join Date: Jun 2009 Location: Clovis, NM Posts: 114	Re: 69 Camaro Gas Tank Install That is pretty slick...I wish I had seen this thread before I did the conversion on my 72 short wide...looks great.

01-06-2011, 06:28 PM	#44
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: 69 Camaro Gas Tank Install this really has me thinking about relocating my tank i'm happy with it in the cab just wish i had the behind the seat room for storage. I'm not a big fan of the other ways __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14 Last edited by Hubscrub; 01-06-2011 at 06:29 PM.

01-06-2011, 06:57 PM	#45
Valhalla Registered User Join Date: Nov 2010 Location: Chandler, Arizona Posts: 295	Re: 69 Camaro Gas Tank Install Great thread I am thinking about this over the $500 aluminum ones that mount in the bed. __________________ My build thread for Project TiC TaC/Jazzmin Oh Yeahhh Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own. SqueegeeMan

01-07-2011, 08:07 AM	#47
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: 69 Camaro Gas Tank Install Yes. I used wood blocks to mock it up in 1 inch increments until I found the right height for my application. __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500 Last edited by 67Slider; 01-07-2011 at 08:11 AM.

01-07-2011, 09:09 PM	#48
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: 69 Camaro Gas Tank Install Ok Guys. I went to the yard today and picked up a new license plate holder. It came off a 92 Caprice (old cop car). Works awesome. Thanks for the heads up on this one. Here are some pics and a shot of the tank from up my driveway and from the side. [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500 Last edited by 67Slider; 01-07-2011 at 09:10 PM.

01-07-2011, 11:39 PM	#50
Kidd-7 Registered User Join Date: Aug 2010 Location: RTP, NC Posts: 518	Re: 69 Camaro Gas Tank Install Any idea on using this setup on a chrome bumper? I'd hate to fork over the $$ for chrome and then cut a hole in it.

Register or Log In To remove these advertisements.