Rear Cab Trim and Bed On - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 03-14-2009, 08:58 PM

-
Well, the bed is in place and I think it looks great!

I thought I would also include the rear cab trim install with this post. I bought new clips for the rear cab stainless trim, so I took a couple of pictures of the installation. I had to clean the paint off of the buttons so the clips would slide on and lock in place. I don't think there is a right or wrong way to put them on but I wanted the clips as close to the end as I could get them on the corners. (pic #1) The second picture explains how the trim sits on the clip. And the third picture shows the trim in place. Sorry for the dark pics but I couldn't seem to get them lightened up. I polished the trim with a buffer wheel and two grades of stainless buffing compound. The part # for the clips I used was 30-1675 but I don't know who they are made by. Everything went together really easy.

LockDoc

**LockDoc** · 03-14-2009, 08:59 PM

-
Trim Pic

Longhorn Man · 03-14-2009, 09:11 PM

lookin good man

**72 Super** · 03-14-2009, 09:12 PM

Coming along nicely,can't wait to see it finished.

CG · 03-14-2009, 09:12 PM

Wow thats looking nice. And thanks for the close up shots of the trim clips and how they work.

**FleetsidePaul** · 03-14-2009, 09:13 PM

That truck is beautiful....nice job

Andy4639 · 03-14-2009, 09:48 PM

Looking good LockDoc.
I bet cleaning that trim was fun too!

beautimus · 03-14-2009, 10:49 PM

loc doc
next time you have your camera out, would you post a picture of the top of the dash where it meets the windshield pillar. i can't remember weather the seam shows or if its supposed to be sealed up. thanks
tony

**LockDoc** · 03-15-2009, 07:29 AM

-
Thanks for the compliments guys. I'm really happy with the way it's turning out so far.

beautimus: I will have the camera out today. I don't think there is any sealer in there but I will take a pic.

LockDoc

71MUTT · 03-15-2009, 08:25 AM

That truck is going to be really, really nice. I love that paint scheme with the trim package. It's my favorite.

**special-K** · 03-15-2009, 09:32 AM

That`s definately going to look sharp all done.

Lugnut64052 · 03-15-2009, 10:32 AM

Nice!

And thanks for the excellent installation pictures. (right click/save!)

EyeH8the24 · 03-15-2009, 10:41 AM

looks awsome ....the color combo is great

72BlckButy · 03-15-2009, 04:44 PM

Awesome progress Leon!

eightbanger · 03-15-2009, 05:06 PM

I love the bright work stage, the color combo looks great.

71c10bbsuper · 03-15-2009, 05:38 PM

looks great , same color combo as mine ,just wondering how hard will it be to put the cab cornor mouldings on with the gas tank in place? keep up the good work.

VA72C10 · 03-15-2009, 05:47 PM

Looks awesome!!!

Bob 68327 · 03-15-2009, 07:36 PM

I saw this in person today !! I tell you guys the pictures are very nice but when you see it up close WOW!!! It looks great Leon all that sandin' paid off

Bob

**LockDoc** · 03-15-2009, 09:29 PM

Quote:

Originally Posted by beautimus

loc doc
next time you have your camera out, would you post a picture of the top of the dash where it meets the windshield pillar. i can't remember weather the seam shows or if its supposed to be sealed up. thanks
tony

Tony,

Here are a couple of pics. The drivers side doesn't have anything in it but the passengers side looks like it might have had some in it at one time. Or it's just filled in with dirt.

LockDoc

67ChevyRedneck · 03-15-2009, 09:48 PM

Hey Leon, where did you order the clips from? I like that it won't actually touch the cab. I plan on adding it to my truck.

**LockDoc** · 03-15-2009, 09:53 PM

Quote:

Originally Posted by Bob 68327

I saw this in person today !! I tell you guys the pictures are very nice but when you see it up close WOW!!! It looks great Leon all that sandin' paid off

Bob

Bob,

Thanks for stoppin' by. It was good to see you and your dad again.

LockDoc

**LockDoc** · 03-15-2009, 09:56 PM

Quote:

Originally Posted by 67ChevyRedneck

Hey Leon, where did you order the clips from? I like that it won't actually touch the cab. I plan on adding it to my truck.

I have a local 67-72 parts store. He does mail order too.

Arts Classic Truck parts. I will PM you the contact info

LockDoc

67ChevyRedneck · 03-15-2009, 09:58 PM

Thanks, I don't think I've seen that type anywhere else?

**LockDoc** · 03-15-2009, 10:08 PM

Quote:

Originally Posted by 71c10bbsuper

looks great , same color combo as mine ,just wondering how hard will it be to put the cab cornor mouldings on with the gas tank in place? keep up the good work.

Thanks.

If I have a problem with the tank I will just loosen it up and slide it over.

LockDoc

brownge · 09-14-2009, 06:23 PM

Nice truck Leon. Do you have any tips for removing the cab rear stainless trim?

Thanks,
Greg

03-14-2009, 08:59 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,329	Re: Rear Cab Trim and Bed On - Trim Pic Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-14-2009, 09:11 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Rear Cab Trim and Bed On lookin good man

03-14-2009, 09:12 PM	#4
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,678	Re: Rear Cab Trim and Bed On Coming along nicely,can't wait to see it finished. __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

03-14-2009, 09:12 PM	#5
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,773	Re: Rear Cab Trim and Bed On Wow thats looking nice. And thanks for the close up shots of the trim clips and how they work. __________________ … … … … … … … … ... … … … … … … … … … … … Monroe Swap meet May 18-19. Mike has the same spots for the NW guys he's had forever. Lunch time BBQ at the spaces. If you have stuff to sell bring it along. If you have a question PM stllookn (Mike) here via the board. https://67-72chevytrucks.com/vboard/...d.php?t=851291

03-14-2009, 09:13 PM	#6
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,411	Re: Rear Cab Trim and Bed On That truck is beautiful....nice job __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

03-14-2009, 08:58 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,329	Rear Cab Trim and Bed On - Well, the bed is in place and I think it looks great! I thought I would also include the rear cab trim install with this post. I bought new clips for the rear cab stainless trim, so I took a couple of pictures of the installation. I had to clean the paint off of the buttons so the clips would slide on and lock in place. I don't think there is a right or wrong way to put them on but I wanted the clips as close to the end as I could get them on the corners. (pic #1) The second picture explains how the trim sits on the clip. And the third picture shows the trim in place. Sorry for the dark pics but I couldn't seem to get them lightened up. I polished the trim with a buffer wheel and two grades of stainless buffing compound. The part # for the clips I used was 30-1675 but I don't know who they are made by. Everything went together really easy. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 03-18-2020 at 04:39 PM.

03-14-2009, 09:48 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Rear Cab Trim and Bed On Looking good LockDoc. I bet cleaning that trim was fun too! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-14-2009, 10:49 PM	#8
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	Re: Rear Cab Trim and Bed On loc doc next time you have your camera out, would you post a picture of the top of the dash where it meets the windshield pillar. i can't remember weather the seam shows or if its supposed to be sealed up. thanks tony __________________ i survived cancer and kidney stones, but my kids are killing me.

03-15-2009, 07:29 AM	#9
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,329	Re: Rear Cab Trim and Bed On - Thanks for the compliments guys. I'm really happy with the way it's turning out so far. beautimus: I will have the camera out today. I don't think there is any sealer in there but I will take a pic. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-15-2009, 08:25 AM	#10
71MUTT Can't ReMember Join Date: Dec 2006 Location: Orlando area Posts: 258	Re: Rear Cab Trim and Bed On That truck is going to be really, really nice. I love that paint scheme with the trim package. It's my favorite. __________________ Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running )

03-15-2009, 09:32 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Rear Cab Trim and Bed On That`s definately going to look sharp all done. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 03-15-2009 at 09:34 AM.

03-15-2009, 10:32 AM	#12
Lugnut64052 Middle-aged Curmudgeon Join Date: Jun 2008 Location: Independence, MO Posts: 753	Re: Rear Cab Trim and Bed On Nice! And thanks for the excellent installation pictures. (right click/save!) __________________ Bret Check out the site's Truck Tech FAQ. Be a site supporter. My more-or-less pathetic build thread. Board members I've met: ------------------------------ Longhorn Man Dieselwrencher jholley big mike71

03-15-2009, 10:41 AM	#13
EyeH8the24 Registered User Join Date: Dec 2004 Location: beulah,alabama Posts: 1,075	Re: Rear Cab Trim and Bed On looks awsome ....the color combo is great

03-15-2009, 04:44 PM	#14
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Rear Cab Trim and Bed On Awesome progress Leon! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-15-2009, 05:06 PM	#15
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: Rear Cab Trim and Bed On I love the bright work stage, the color combo looks great. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger



Register or Log In To remove these advertisements.

03-15-2009, 05:38 PM	#16
71c10bbsuper Registered User Join Date: Jan 2007 Location: wyo Posts: 61	Re: Rear Cab Trim and Bed On looks great , same color combo as mine ,just wondering how hard will it be to put the cab cornor mouldings on with the gas tank in place? keep up the good work.

03-15-2009, 05:47 PM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Rear Cab Trim and Bed On Looks awesome!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-15-2009, 07:36 PM	#18
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: Rear Cab Trim and Bed On I saw this in person today !! I tell you guys the pictures are very nice but when you see it up close WOW!!! It looks great Leon all that sandin' paid off Bob __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

03-15-2009, 09:48 PM	#20
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Rear Cab Trim and Bed On Hey Leon, where did you order the clips from? I like that it won't actually touch the cab. I plan on adding it to my truck. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-15-2009, 09:58 PM	#23
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Rear Cab Trim and Bed On Thanks, I don't think I've seen that type anywhere else? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-14-2009, 06:23 PM	#25
brownge Registered User Join Date: Jun 2008 Location: Magnolia, TX Posts: 224	Re: Rear Cab Trim and Bed On Nice truck Leon. Do you have any tips for removing the cab rear stainless trim? Thanks, Greg

Register or Log In To remove these advertisements.