PA Low back bucket seat tracks w/ brackets with p/s floor mounts and seat belts

[1rippen6]

Tracks are good but the mounting brackets need some tlc. I'm assuming the seat belts are correct for a bucket seat application and the floor mounts for the passenger side. They made need some extra metal welded on, I'm not sure if they cut them tight to the floor. Bucket seats are not available. The one passenger bracket was removed from the seat and the spacers were missing, the one side is there for comparison. 450 plus shipping

[1rippen6]

More pics

[TKCR]

Should you decided to separate, I’m in for the seatbelts. Those are just single cab belts for the 76/77. Not specifically for just the Bucket seats. They were used for the Benchseats also.

[1rippen6]

Originally Posted by TKCR

Should you decided to separate, I’m in for the seatbelts. Those are just single cab belts for the 76/77. Not specifically for just the Bucket seats. They were used for the Benchseats also.

Even the center belts with the plastic cover to the buckle?

[TKCR]

Originally Posted by 1rippen6

Even the center belts with the plastic cover to the buckle?

Yep, the retractors will need buckles.

[1rippen6]

Originally Posted by TKCR

Yep, the retractors will need buckles.

I may have not asked the question correctly. I was asking if the center belts on the bench seat trucks have plastic covers the whole way up to the buckles like the ones pictured.

[TKCR]

Originally Posted by 1rippen6

I may have not asked the question correctly. I was asking if the center belts on the bench seat trucks have plastic covers the whole way up to the buckles like the ones pictured.

The bench seat is slightly different, as far as the sleeves. And the of course there’s the center lap belt. But that’s the only slight difference. The retractor is still the same whether it’s for a bench or buckets.

[1rippen6]

Ok, thank you for the pictures, that helps a lot. It does look like there is some slight differences.

[TKCR]

Originally Posted by 1rippen6

Ok, thank you for the pictures, that helps a lot. It does look like there is some slight differences.

Yeah, just that there’s a center lap belt added. The sleeves are slightly different to accommodate those.
Should you decide to separate, I’m interested in the belts.