The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-24-2018, 07:31 PM   #1
chip46wis
Registered User
 
Join Date: Dec 2004
Location: Central Wisconsin
Posts: 1,317
One wire alt. and fan relay on POS side battery?

Ok---getting to final wiring on my 56 Question---I already have my one wire alternator 105 amp running to the pos side of the battery 8 gauge wire---------Can I also run the 10 gauge wire from the pos terminal ---fused to the relay for the 1 1600 cfm fan without overloading the fan wire? just seems all the alt juice is going to overload the fan wire? same terminal.
chip46wis is offline   Reply With Quote
Old 01-25-2018, 02:15 AM   #2
VetteVet
Msgt USAF Ret

 
VetteVet's Avatar
 
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,703
Re: One wire alt. and fan relay on POS side battery?

Quote:
Originally Posted by chip46wis View Post
Ok---getting to final wiring on my 56 Question---I already have my one wire alternator 105 amp running to the pos side of the battery 8 gauge wire---------Can I also run the 10 gauge wire from the pos terminal ---fused to the relay for the 1 1600 cfm fan without overloading the fan wire? just seems all the alt juice is going to overload the fan wire? same terminal.
This is a common misconception among people who don't understand how the alternator works. Even though the alternator is capable of putting out 105 amps, it will only generate enough to maintain the circuit voltage that the system is designed for, and to keep the battery charged. Everything in the truck is an amperage draw including the battery. The alternator will only put out enough to satisfy that draw and keep the battery charged.

Think of it this way. If you have a 1000 GPH water pump in your house and you change it for a pump that is capable of 3000 GPH, is that going to burst water pipes. The alternator is just an amperage pump that will output up to it's capacity. Now if the wire was too small to carry the load of the fan, then it would burn up due to it's resistance, but the alternator would not be at fault.

Here is a nice diagram of how to wire a single fan, and it even shows how to wire in a bypass switch to turn on the fan, and a light to show that the fan is running.


Name:  fan on manualpontiac_cooling_system+diagram2.jpg
Views: 79
Size:  30.4 KB
__________________
VetteVet

metallic green 67 stepside
74 corvette convertible
1965 Harley sportster
1995 Harley wide glide

Growing old is hell, but it beats the alternative.
VetteVet is offline   Reply With Quote
Old 01-25-2018, 03:11 AM   #3
chip46wis
Registered User
 
Join Date: Dec 2004
Location: Central Wisconsin
Posts: 1,317
Re: One wire alt. and fan relay on POS side battery?

Vettevet you have helped myself and MANY others again and again----THANK YOU!!!!!
chip46wis is offline   Reply With Quote
Old 01-25-2018, 10:43 AM   #4
VetteVet
Msgt USAF Ret

 
VetteVet's Avatar
 
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,703
Re: One wire alt. and fan relay on POS side battery?

Quote:
Originally Posted by chip46wis View Post
Vettevet you have helped myself and MANY others again and again----THANK YOU!!!!!
Your very welcome.
__________________
VetteVet

metallic green 67 stepside
74 corvette convertible
1965 Harley sportster
1995 Harley wide glide

Growing old is hell, but it beats the alternative.
VetteVet is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com