1954 COE 4X4, very cool - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**57NAPCO** · 02-16-2018, 07:42 AM

I dig it

https://pittsburgh.craigslist.org/ct...480523787.html

**Advanced Design** · 02-16-2018, 10:55 AM

$25k....

Fred n' Ethel · 02-16-2018, 11:22 AM

WICKED awesome .... I want one !
Thanks for posting

wahl4m · 02-16-2018, 11:59 AM

anybody got any ideas -how they got them wheels to fit a 1 ton hub ?? i didnt think they are a bolt on ??

Second Series · 02-16-2018, 03:00 PM

From the add:
"1954 GMC 350 COE or Cab Over Engine Truck

1980 Chevy K30 1 Ton Dually Chassis 4x4
Dana 60 Front End with manual lock in lock out hubs
350 Engine
4 Speed Manual Transmission
NP 205 Gear Driver Transfer Case
Rear End is a HD Dana 70
4 Wheel Disc Brakes
22.5" Alcoa 10 Lug Semi Truck Wheels
Tires are 295 75 22.5 and are roughly 40" Tall...... They are about 1" shorter than 11r22.5
New Steering Box
New Power Steering Pump
New Tool Boxes
New Seat
New Etc....."

Old57 · 02-16-2018, 06:22 PM

There are adapters that allow those wheels to fit on light truck 8 lug hubs

Daze57 · 02-16-2018, 06:39 PM

very cool

flashed · 02-16-2018, 08:50 PM

I love it ,just too cool .

02-16-2018, 07:42 AM	#1
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,208	1954 COE 4X4, very cool I dig it https://pittsburgh.craigslist.org/ct...480523787.html

02-16-2018, 10:55 AM	#2
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: 1954 COE 4X4, very cool $25k.... Attached Images __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

02-16-2018, 11:22 AM	#3
Fred n' Ethel Registered User Join Date: Feb 2018 Location: Eastern WV Posts: 161	Re: 1954 COE 4X4, very cool WICKED awesome .... I want one ! Thanks for posting

02-16-2018, 11:59 AM	#4
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: 1954 COE 4X4, very cool--WHEELS anybody got any ideas -how they got them wheels to fit a 1 ton hub ?? i didnt think they are a bolt on ??

02-16-2018, 03:00 PM	#5
Second Series Registered User Join Date: May 2015 Location: Tukwila Washington Posts: 372	Re: 1954 COE 4X4, very cool From the add: "1954 GMC 350 COE or Cab Over Engine Truck 1980 Chevy K30 1 Ton Dually Chassis 4x4 Dana 60 Front End with manual lock in lock out hubs 350 Engine 4 Speed Manual Transmission NP 205 Gear Driver Transfer Case Rear End is a HD Dana 70 4 Wheel Disc Brakes 22.5" Alcoa 10 Lug Semi Truck Wheels Tires are 295 75 22.5 and are roughly 40" Tall...... They are about 1" shorter than 11r22.5 New Steering Box New Power Steering Pump New Tool Boxes New Seat New Etc....."

02-16-2018, 06:22 PM	#6
Old57 Registered User Join Date: Apr 2015 Location: Wichita Kansas Posts: 455	Re: 1954 COE 4X4, very cool There are adapters that allow those wheels to fit on light truck 8 lug hubs __________________ My 57 GMC build

02-16-2018, 06:39 PM	#7
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: 1954 COE 4X4, very cool very cool

02-16-2018, 08:50 PM	#8
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,729	Re: 1954 COE 4X4, very cool I love it ,just too cool .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.