47-55.1 Raptor herculined on bed wood? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skip99 · 08-08-2019, 08:59 PM

Anyone used either on bed wood? Want a decent black coating,,probably use white oak ..any issue with either sticking to ood?

mr48chev · 08-09-2019, 01:28 AM

I'd want to find out how well it adhered to wood and stayed on wood before using it.

MiraclePieCo · 08-09-2019, 03:32 AM

I noticed that the original factory undercoating adhered to the metal much better than the wood, which has some peeling areas. But heck, it's 60 years old!

65blackfleetside · 08-09-2019, 10:41 PM

I have not had good luck spraying raptor on wood. if that is the look that you are going for maybe just use the trex type synthetic decking instead. HD has it in a deep grey blue color. looks nice. 20 buck a board

vintovka · 08-11-2019, 12:31 AM

After the 3rd bed in 5 decades i needed one to out last me in a corrosive salt air climate. Gave it some thought but went with spraying entire bed walls, tailgate and top rails with raptor and replacing bed wood with synthetic decking and stainless bed strips. all hardware was replaced with SS.

skip99 · 08-12-2019, 04:58 PM

Quote:

Originally Posted by 65blackfleetside

I have not had good luck spraying raptor on wood. if that is the look that you are going for maybe just use the trex type synthetic decking instead. HD has it in a deep grey blue color. looks nice. 20 buck a board

Ill look ,i need just under 3/4 , but cant find anything wider than 6”

vintovka · 08-12-2019, 05:36 PM

I used the stuff from lowes. it is about 12x3/4" and used for fascia or trim (not deck top). I only needed to mill one edge on two boards to fit under the bed angles that are welded in on each side. Just butted up the rest and used SS bed strips as drill guides. Add SS angle covers over side bed rails. All new SS hardware too. You can get fancy but i am officially old now and don't have the time or skill anymore. See Page 3 of build link below.

The combination of SS, Synthetic and "rino" liners has withstood our harsh salt sea environment amazingly well.

_Ogre · 08-13-2019, 02:32 PM

Quote:

Originally Posted by skip99

Ill look ,i need just under 3/4 , but cant find anything wider than 6”

i used trek plastic decking on truk, it only comes in 5.25 width, i have 1 extra board and bed strip

08-08-2019, 08:59 PM	#1
skip99 Registered User Join Date: Oct 2010 Location: mt vernon, oh Posts: 867	Raptor herculined on bed wood? Anyone used either on bed wood? Want a decent black coating,,probably use white oak ..any issue with either sticking to ood? __________________ Tami's 51 build http://67-72chevytrucks.com/vboard/s...d.php?t=428878

08-09-2019, 01:28 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,284	Re: Raptor herculined on bed wood? I'd want to find out how well it adhered to wood and stayed on wood before using it. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-09-2019, 03:32 AM	#3
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: Raptor herculined on bed wood? I noticed that the original factory undercoating adhered to the metal much better than the wood, which has some peeling areas. But heck, it's 60 years old! __________________ 1951 Chevy Panel Truck

08-09-2019, 10:41 PM	#4
65blackfleetside Registered User Join Date: Nov 2015 Location: Central Florida Posts: 215	Re: Raptor herculined on bed wood? I have not had good luck spraying raptor on wood. if that is the look that you are going for maybe just use the trex type synthetic decking instead. HD has it in a deep grey blue color. looks nice. 20 buck a board __________________ current ride 1951 AD Chevy 5 window 2004 LS Gen 3 [/B] 1965 fleetside Sold

08-11-2019, 12:31 AM	#5
vintovka Registered User Join Date: Aug 2016 Location: Hunkered Down Posts: 1,773	Re: Raptor herculined on bed wood? After the 3rd bed in 5 decades i needed one to out last me in a corrosive salt air climate. Gave it some thought but went with spraying entire bed walls, tailgate and top rails with raptor and replacing bed wood with synthetic decking and stainless bed strips. all hardware was replaced with SS. __________________ 1954 USAF 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=714917

08-12-2019, 05:36 PM	#7
vintovka Registered User Join Date: Aug 2016 Location: Hunkered Down Posts: 1,773	Re: Raptor herculined on bed wood? I used the stuff from lowes. it is about 12x3/4" and used for fascia or trim (not deck top). I only needed to mill one edge on two boards to fit under the bed angles that are welded in on each side. Just butted up the rest and used SS bed strips as drill guides. Add SS angle covers over side bed rails. All new SS hardware too. You can get fancy but i am officially old now and don't have the time or skill anymore. See Page 3 of build link below. The combination of SS, Synthetic and "rino" liners has withstood our harsh salt sea environment amazingly well. __________________ 1954 USAF 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=714917



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.